Re: [linux-sunxi] [PATCH 01/13] dt-bindings: update the binding for Allwinner H3 DE2 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2017-08-02 12:53,Jernej Škrabec 写道:
Hi Icenowy,

Dne torek, 01. avgust 2017 ob 15:12:52 CEST je Icenowy Zheng napisal(a):
Allwinner H3 features a "Display Engine 2.0".

Add device tree bindings for the following parts:
- H3 TCONs
- H3 Mixers
- H3 Display engine

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
 .../bindings/display/sunxi/sun4i-drm.txt           | 25
++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index
2ee6ff0ef98e..92512953943e 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -87,18 +87,17 @@ Required properties:
    * allwinner,sun6i-a31-tcon
    * allwinner,sun6i-a31s-tcon
    * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-h3-tcon
    * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
  - clocks: phandles to the clocks feeding the TCON. Three are needed:
    - 'ahb': the interface clocks
-   - 'tcon-ch0': The clock driving the TCON channel 0
  - resets: phandles to the reset controllers driving the encoder
    - "lcd": the reset line for the TCON channel 0

  - clock-names: the clock names mentioned above
  - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created

 - ports: A ports node with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
@@ -112,7 +111,23 @@ Required properties:
   channel the endpoint is associated to. If that property is not
   present, the endpoint number will be used as the channel number.

-On SoCs other than the A33 and V3s, there is one more clock required:
+For the following compatibles:
+   * allwinner,sun5i-a13-tcon
+   * allwinner,sun6i-a31-tcon
+   * allwinner,sun6i-a31s-tcon
+   * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-v3s-tcon
+there is one more clock and one more property required:
+ - clocks:
+   - 'tcon-ch0': The clock driving the TCON channel 0
+ - clock-output-names: Name of the pixel clock created
+
+For the following compatibles:
+   * allwinner,sun5i-a13-tcon
+   * allwinner,sun6i-a31-tcon
+   * allwinner,sun6i-a31s-tcon
+   * allwinner,sun8i-h3-tcon
+there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1

 DRC
@@ -207,6 +222,8 @@ supported.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-v3s-de2-mixer
+    * allwinner,sun8i-h3-de2-mixer0
+    * allwinner,sun8i-h3-de2-mixer1

About that, I concur with Maxime here, plane number properties would be
better. If we don't do this now, we will never have it.

But I still prefer different compatibles, as the capabilities are already proven to be different between mixer0 and mixer1, and furtherly we cannot
promise Allwinner won't add more functions only available at mixer0.

Then we will be trapped into a situation that we describe more and more
functions via properties, but they should be encoded into the compatible.


Reference:
http://lists.infradead.org/pipermail/linux-arm-kernel/2017-June/512902.html

Regards,
Jernej
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux