The H3 SoC has a DesignWare HDMI controller with some Allwinner-specific glues. Add the related device nodes. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- arch/arm/boot/dts/sun8i-h3.dtsi | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 75ad7b65a7fc..cd38d7e04606 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -197,6 +197,11 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + }; }; }; }; @@ -240,6 +245,36 @@ }; }; }; + + hdmi: hdmi@1ee0000 { + compatible = "allwinner,h3-dw-hdmi"; + reg = <0x01ee0000 0x10000>, + <0x01ef0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>; + clock-names = "iahb", "isfr", "iddc"; + resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>; + reset-names = "hdmi", "ddc"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + }; + }; + }; }; timer { -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html