Add binding document for serial bluetooth chips using
Broadcom protocol.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxx>
---
v2: dt-bindings as separate patch
rebase on upcoming pi3 dts changes
.../devicetree/bindings/net/broadcom-bluetooth.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
new file mode 100644
index 0000000..c51ea1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -0,0 +1,29 @@
+Broadcom Bluetooth Chips
+---------------------
+
+This documents the binding structure and common properties for serial
+attached Broadcom devices.
+
+Serial attached Broadcom devices shall be a child node of the host UART
+device the slave device is attached to.
+
+Required properties:
+
+ - compatible: should contain one of the following:
+ * "brcm,bcm43438-bt"
+
+Optional properties:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+
+Example:
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <921600>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
