Enable MMC0 which is used for micro SD and MMC1 which is used for the on
board EMMC.
Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
[fcooper@xxxxxx: add mmc1, bufferclass and pullup/pulldown settings]
Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
[nsekhar@xxxxxx: add card detect GPIO support]
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 53 ++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 61883cb969d2..f47f95d8bf1c 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -25,6 +25,13 @@
reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
};
+ vcc3v3_dcin_reg: fixedregulator-vcc3v3-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc0_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
&k2g_pinctrl {
@@ -34,6 +41,33 @@
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ mmc0_pins: pinmux_mmc0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1300) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat3.mmc0_dat3 */
+ K2G_CORE_IOPAD(0x1304) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat2.mmc0_dat2 */
+ K2G_CORE_IOPAD(0x1308) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat1.mmc0_dat1 */
+ K2G_CORE_IOPAD(0x130c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_dat0.mmc0_dat0 */
+ K2G_CORE_IOPAD(0x1310) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_clk.mmc0_clk */
+ K2G_CORE_IOPAD(0x1314) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE2) /* mmc0_cmd.mmc0_cmd */
+ K2G_CORE_IOPAD(0x12ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc0_sdcd.gpio1_12 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10ec) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat7.mmc1_dat7 */
+ K2G_CORE_IOPAD(0x10f0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat6.mmc1_dat6 */
+ K2G_CORE_IOPAD(0x10f4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat5.mmc1_dat5 */
+ K2G_CORE_IOPAD(0x10f8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat4.mmc1_dat4 */
+ K2G_CORE_IOPAD(0x10fc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ >;
+ };
};
&uart0 {
@@ -41,3 +75,22 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>;
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ status = "okay";
+};
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
