Hi Andy, Am Montag, 31. Juli 2017, 18:06:42 CEST schrieb Andy Yan: > From: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > > Added the missing clock ids, make the clock more complete. > > Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx> this clock-id patch is way to overloaded. Please split into 3 parts: - completely new clock-ids - changes to existing clock-ids This also needs a very good reasoning, as such constant ids are considered part of api and should not change to prevent breakage with old devicetrees. So please double-check if the rename is really necessary. - cosmetics ... aka the indentation stuff [...] > /* aclk gates */ > #define ACLK_DMAC 192 > -#define ACLK_PRE 193 > +#define ACLK_BUS 193 This is one such case where you need a very good reason [...] > @@ -59,18 +120,30 @@ > #define PCLK_I2C2 261 > #define PCLK_I2C3 262 > #define PCLK_SPI 263 > -#define PCLK_SFC 264 why is this clock going away? > #define PCLK_UART0 265 > #define PCLK_UART1 266 > #define PCLK_UART2 267 > #define PCLK_TSADC 268 > -#define PCLK_PWM 269 > +#define PCLK_PWM1 269 In your pwm patch, all blocks use the same clocks, so this rename should be unnecessary > /* hclk gates */ > #define HCLK_I2S0_8CH 320 > -#define HCLK_I2S1_8CH 321 > +#define HCLK_I2S1_2CH 321 Again reasoning required (that i2s1 has 2 channels but not 8 should be ok for that) > #define HCLK_I2S2_2CH 322 > #define HCLK_NANDC 323 > #define HCLK_SDMMC 324 Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html