Re: [PATCH v7 0/2] ohci and ehci-platform clks, phy and dt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 01/17/2014 06:12 PM, Alan Stern wrote:
On Thu, 16 Jan 2014, Florian Fainelli wrote:

Le mercredi 15 janvier 2014, 15:26:21 Alan Stern a �crit :
On Wed, 15 Jan 2014, Hans de Goede wrote:
Hi All,

This version of my ohci and ehci-platform clks, phy and dt support
patch-set, really fixes the 2 small bugs Alan found.

All okay -- this time I can't find anything to complain about.  :-)

There is one minor issue; which is that the ehci binding claims the driver
supports the following optional boolean properties:

- big-endian-regs : boolean, set this for hcds with big-endian registers
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc

while it does not (yet) so this is misleading. Can we at get that fixed before
merging? Copy pasting the PPC ehci driver should do the job.

I agree it needs to be fixed.  This can be done in a follow-up patch,
though.  It doesn't have to be in this one because nobody is using
ehci-platform with DT yet.

A simple copy from the PPC driver isn't quite enough, because the
platform data settings would override the DT values.
ehci_platform_reset has to be changed so that it sets
ehci->big_endian_desc and _mmio if the pdata flags are set, but
otherwise leaves them alone.

Hans, would you like to write another patch to take care of this?

I already took a quick look at this, setting the ehci->big_endian* flags is easy,
the problem is that they won't work unless we also define
CONFIG_USB_EHCI_BIG_ENDIAN_DESC and CONFIG_USB_EHCI_BIG_ENDIAN_MMIO

I would like to avoid doing something like the ugliness we've with
USB_OHCI_HCD_PPC_OF_BE and USB_OHCI_HCD_PPC_OF_LE, which means just selecting these
2 config options whenever USB_EHCI_HCD_PLATFORM is enabled, but I'm not sure if that
is acceptable.

The same goes for the ohci code btw.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux