v6:
Added 'Reviewed-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>' and fixed
white space issues as mentioned by Vivek.
phy: qcom-qmp: Fix phy pipe clock name
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
v5:
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
Renamed phy_phy clock as common clock
phy: qcom-qmp: Fix phy pipe clock name
Moved the DT get into the registering function
phy: qcom-qmp: Add support for IPQ8074
Place the IPQ8074 related structs similar to existing SoC.
Renamed phy_phy clock as common clock
v4:
phy: qcom-qmp: Fix phy pipe clock name
Based on Vivek's comments, return failure only for
PCI/USB type of phys.
Removed Ack.
phy: qcom-qmp: Handle unavailable registers
Removed this patch.
Incorrectly used a block of code that is not applicable
to IPQ8074, hence had to avoid an "unavailable" register.
Since that is addressed using 'has_phy_com_ctrl' this
patch is not needed.
phy: qcom-qmp: Add support for IPQ8074
Set 'has_phy_com_ctrl' to false
Remove ipq8074_pciephy_regs_layout
v3:
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
Incoporate Stan's feedback:-
- Add SoC Wrapper and Synopsys Core IP versions
v2:
dt-bindings: phy: qmp: Add output-clock-names
Added Rob H's Ack
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
Removed example
Added IPQ8074 specific details
phy: qcom-qmp: Fix phy pipe clock name
Added Vivek's Ack
phy: qcom-qmp: Handle unavailable registers
No changes
phy: qcom-qmp: Add support for IPQ8074
No changes
PCI: dwc: qcom: Use block IP version for operations
Added new patch to use block IP version instead of v1, v2...
dt-bindings: pci: qcom: Add support for IPQ8074
Removed example
Added IPQ8074 specific details
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
Incorporated Bjorn's feedback:-
- Removed reset names, helper function to assert/deassert, helper
function to R/M/W register.
- Renamed sys_noc clock as iface clock
- Added deinit if phy power on fails
v1:
Add definitions required to enable QMP phy support for IPQ8074.
Add support for the IPQ8074 PCIe controller. IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.
Varadarajan Narayanan (7):
dt-bindings: phy: qmp: Add output-clock-names
dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
phy: qcom-qmp: Fix phy pipe clock name
phy: qcom-qmp: Add support for IPQ8074
PCI: dwc: qcom: Use block IP version for operations
dt-bindings: pci: qcom: Add support for IPQ8074
PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
.../devicetree/bindings/pci/qcom,pcie.txt | 23 ++
.../devicetree/bindings/phy/qcom-qmp-phy.txt | 11 +
drivers/pci/dwc/pcie-qcom.c | 378 +++++++++++++++++----
drivers/phy/qualcomm/phy-qcom-qmp.c | 147 +++++++-
4 files changed, 485 insertions(+), 74 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
