Quoting Maxime Ripard (2014-01-16 09:11:22)
> The A31 has a slightly different PLL6 clock. Add support for this new clock in
> our driver.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
This looks good to me. I guess it will be going in for 3.15 based on the
comments in the coverletter.
Regards,
Mike
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++
> 2 files changed, 46 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index c2cb762..954845c 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -11,6 +11,7 @@ Required properties:
> "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> "allwinner,sun4i-pll5-clk" - for the PLL5 clock
> "allwinner,sun4i-pll6-clk" - for the PLL6 clock
> + "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
> "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
> "allwinner,sun4i-axi-clk" - for the AXI clock
> "allwinner,sun4i-axi-gates-clk" - for the AXI gates
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 659e4ea..990ad5d 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -249,7 +249,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
> *n = DIV_ROUND_UP(div, (*k+1));
> }
>
> +/**
> + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6
> + * PLL6 rate is calculated as follows
> + * rate = parent_rate * n * (k + 1) / 2
> + * parent_rate is always 24Mhz
> + */
> +
> +static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
> + u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> + u8 div;
> +
> + /*
> + * We always have 24MHz / 2, so we can just say that our
> + * parent clock is 12MHz.
> + */
> + parent_rate = parent_rate / 2;
> +
> + /* Normalize value to a parent_rate multiple (24M / 2) */
> + div = *freq / parent_rate;
> + *freq = parent_rate * div;
> +
> + /* we were called to round the frequency, we can now return */
> + if (n == NULL)
> + return;
> +
> + *k = div / 32;
> + if (*k > 3)
> + *k = 3;
>
> + *n = DIV_ROUND_UP(div, (*k+1));
> +}
>
> /**
> * sun4i_get_apb1_factors() - calculates m, p factors for APB1
> @@ -416,6 +447,13 @@ static struct clk_factors_config sun4i_pll5_config = {
> .kwidth = 2,
> };
>
> +static struct clk_factors_config sun6i_a31_pll6_config = {
> + .nshift = 8,
> + .nwidth = 5,
> + .kshift = 4,
> + .kwidth = 2,
> +};
> +
> static struct clk_factors_config sun4i_apb1_config = {
> .mshift = 0,
> .mwidth = 5,
> @@ -457,6 +495,12 @@ static const struct factors_data sun4i_pll5_data __initconst = {
> .getter = sun4i_get_pll5_factors,
> };
>
> +static const struct factors_data sun6i_a31_pll6_data __initconst = {
> + .enable = 31,
> + .table = &sun6i_a31_pll6_config,
> + .getter = sun6i_a31_get_pll6_factors,
> +};
> +
> static const struct factors_data sun4i_apb1_data __initconst = {
> .table = &sun4i_apb1_config,
> .getter = sun4i_get_apb1_factors,
> @@ -972,6 +1016,7 @@ free_clkdata:
> static const struct of_device_id clk_factors_match[] __initconst = {
> {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
> {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
> + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
> {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
> {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
> {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
> --
> 1.8.4.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
