On Wed, Jul 26, 2017 at 04:09:43PM -0500, Rob Herring wrote:
> dtc recently added PCI bus checks. Fix these warnings:
>
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (pci_bridge): Node /pci missing bus-range for PCI bridge
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtb: Warning (unit_address_vs_reg): Node /pci has a reg or ranges property, but no unit name
>
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> Cc: Jayachandran C <jnair@xxxxxxxxxxxxxxxxxx>
> ---
> v2:
> - Reapply broadcom vulkan changes to thunder2.
>
> arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> index 4220fbdcb24a..ea50c1320bf7 100644
> --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
> @@ -98,7 +98,7 @@
> clock-output-names = "clk125mhz";
> };
>
> - pci {
> + pci@30000000 {
> compatible = "pci-host-ecam-generic";
> device_type = "pci";
> #interrupt-cells = <1>;
> @@ -118,6 +118,7 @@
> ranges =
> <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
> 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
> + bus-range = <0 0xff>;
> interrupt-map-mask = <0 0 0 7>;
> interrupt-map =
> /* addr pin ic icaddr icintr */
Thanks for fixing this up.
Acked-by: Jayachandran C <jnair@xxxxxxxxxxxxxxxxxx>
The unit name issue is there with memory node on thunder2-99xx.dts as well, I can fix
this up if you are not planning to.
JC
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
