Hi Thierry,
The 2 dt-bindings patches have been "acked" by Rob.
The driver itself has been "reviewed" two times by Andrzej.
Do not hesitate to send me any comments so I can take them into account
before my holidays (end of next week)...
Many thanks for your support,
Philippe :-)
On 07/17/2017 03:19 PM, Philippe CORNU wrote:
> Version 3:
> - panel-orisetech-otm8009a.c: Remove a FIXME (Andrzej Hajda)
> - panel/Makefile & Kconfig: Alphabetical order (Andrzej Hajda)
>
> Version 2:
> - panel-orisetech-otm8009a.c: Add Manufacturer Command Set defines,
> add new macro for handling address shifting, improve reset
> sequence, use more mipi dcs helpers (Andrzej Hajda)
> - dt-bindings/display/panel/orisetech,otm8009a.txt: Fix reset gpio
> active level in the example (Andrzej Hajda), Add an "Optional
> Properties" section (Rob Herring).
>
> Version 1:
> - Initial commit
>
> The purpose of this patch is to add support for the Orise Tech
> otm8009a 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode).
> This LCD panel is used in several STM32 boards.
>
> Philippe CORNU (3):
> dt-bindings: Add vendor prefix for Orise Technology
> dt-bindings: display: panel: Add support for Orise Tech otm8009a dsi
> panel
> drm/panel: Add support for otm8009a panel driver
>
> .../bindings/display/panel/orisetech,otm8009a.txt | 21 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 491 +++++++++++++++++++++
> 5 files changed, 523 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
> create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
> ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
