Re: [PATCH 1/2] arm: dts: stm32: add cec for stm32f7 familly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Benjamin,

On 07/18/2017 10:51 AM, Benjamin Gaignard wrote:
add cec in devicetree for stm32f7 familly

version 1.1:
- with correct slew rate

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
---
  arch/arm/boot/dts/stm32f746.dtsi | 18 ++++++++++++++++++
  1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 0c3dd1f..770e474 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -167,6 +167,15 @@
  			status = "disabled";
  		};
+ cec: cec@40006c00 {
+			compatible = "st,stm32-cec";
+			reg = <0x40006C00 0x400>;
+			interrupts = <94>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
  		usart7: serial@40007800 {
  			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
  			reg = <0x40007800 0x400>;
@@ -339,6 +348,15 @@
  				st,bank-name = "GPIOK";
  			};
+ cec_pins_a: cec@0 {
+				pins {
+					pinmux = <STM32F746_PA15_FUNC_HDMI_CEC>;
+					slew-rate = <0>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
  			usart1_pins_a: usart1@0 {
  				pins1 {
  					pinmux = <STM32F746_PA9_FUNC_USART1_TX>;


After minor changes, applied on stm32-dt-for-v4.14 branch.

Thanks
Alex
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux