Re: [PATCH v3 1/2] gpio: davinci: Add keystone-k2g compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/26/2017 08:36 AM, Keerthy wrote:
> 
> On Wednesday 26 July 2017 06:57 PM, Franklin S Cooper Jr wrote:
>>
>>
>> On 07/26/2017 08:00 AM, Suman Anna wrote:
>>> Hi Keerthy,
>>>
>>> On 07/26/2017 01:45 AM, Keerthy wrote:
>>>> The patch adds keystone-k2g compatible, specific properties and
>>>> an example.
>>
>> Seems we are adding information regarding several Keystone 2 SoCs. So
>> the commit and subject should be tweaked to reflect this.
> 
> Okay i can add that as well.
> 
>>>
>>> Please update patch header to "dt-bindings: gpio: davinci: ...."
>>>
>>>>
>>>> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
>>>> ---
>>>>
>>>> Changes in v3:
>>>>
>>>>   * Added details about family of SoCs corresponding to compatibles.
>>>>
>>>>  .../devicetree/bindings/gpio/gpio-davinci.txt      | 40 +++++++++++++++++++++-
>>>>  1 file changed, 39 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>>>> index 5079ba7..fb9efee 100644
>>>> --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>>>> +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
>>>> @@ -1,7 +1,10 @@
>>>>  Davinci/Keystone GPIO controller bindings
>>>>  
>>>>  Required Properties:
>>>> -- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
>>>> +- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs 
>>>> +			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
>>>> +						66AK2E SoCs
>>>> +			"ti,keystone-k2g-gpio", "ti,keystone-gpio": for 66AK2G
>>>>  
>>>>  - reg: Physical base address of the controller and the size of memory mapped
>>>>         registers.
>>>> @@ -26,6 +29,17 @@ The GPIO controller also acts as an interrupt controller. It uses the default
>>>>  two cells specifier as described in Documentation/devicetree/bindings/
>>>>  interrupt-controller/interrupts.txt.
>>>>  
>>>> +Required Properties specific to keystone-k2g
>>>
>>> Thanks for updating the binding for the clocks, but clocks are not
>>> specific to K2G. They also apply to other K2 SoCs. Davinci platforms do
>>> not have DT clocks atm, so the Davinci portion can be updated later if
>>> and when they get added.
>>>
>>
>> What about power-domain property?

The correct name is "power-domains".

> Driver has no pm_runtime implemented yet.

True, not yet, but this is in general a required property on K2G SoCs to
automatically enable clocks through runtime_pm. Clock properties on K2G
nodes should only be truly required if a driver is using clk API
(ideally to control optional clocks or for adjusting clock frequencies).
When the gpio-davinci driver gets updated to use pm_runtime, the clock
properties will be rendered obsolete for K2G.

Rob,
Any suggestions on how we need to handle this? Should we be adding the
property now or later when we adapt the driver for runtime_pm? This
would be a common theme for K2G nodes that are reusing Davinci drivers.

My take on this would be to add the property now, and mark the clock
properties obsolete when the driver gets converted.

regards
Suman

> 
>>
>>>> +
>>>> +- clocks: Should contain devices input clock. The first parameter
>>>> +           is a handle to k2g_clks. The second parameter is the
>>>> +           device ID and the third parameter is the clock ID. One can
>>>> +           refer: http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
>>>
>>> No need for this link here, just refer to the appropriate clock
>>> bindings. Some thing like the following would be better
>>
>> This information is helpful especially with the macros being dropped.
>> However, I agree that this is not the place for this information.
>> Probably should be linked to in the ti,sci-clk.txt and
>> sci-pm-domain.txt. However, both of these are outdated since it is
>> referring to macros and includes that don't exist or will no longer exist.
> 
> Hence included here but yes i can point to something like what Suman
> asked me to.
> 
>>
>>>
>>> - clocks:               Should contain the device's input clock, and
>>>                         should be defined as per the appropriate clock
>>> bindings consumer usage in,
>>>
>>> Documentation/devicetree/bindings/clock/keystone-gate.txt
>>>                             for 66AK2HK/66AK2L/66AK2E SoCs or,
>>>
>>> Documentation/devicetree/bindings/clock/ti,sci-clk.txt
>>>                             for 66AK2G SoCs
>>>
>>>> +
>>>> +           Example: <&k2g_clks 0x001c 0x0>;
>>>
>>> This can be dropped as well, below example already demonstrates it.
>>>
>>>> +
>>>> +- clock-names: The driver expects the clock name to be "gpio";
>>>
>>> Just say, Should be "gpio". No need of mentioning about the driver.
>>>
>>>> +
>>>>  Example:
>>>>  
>>>>  gpio: gpio@1e26000 {
>>>> @@ -60,3 +74,27 @@ leds {
>>>>  		...
>>>>  	};
>>>>  };
>>>> +
>>>> +Example for keystone-k2g:
>>>
>>> s/keystone-k2g/66AK2G/
>>>
>>>> +
>>>> +gpio0: gpio@2603000 {
>>>> +	compatible = "ti,keystone-k2g-gpio", "ti,keystone-gpio";
>>>> +	reg = <0x02603000 0x100>;
>>>> +	gpio-controller;
>>>> +	#gpio-cells = <2>;
>>>> +	interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
>>>> +			<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
>>>> +	interrupt-controller;
>>>> +	#interrupt-cells = <2>;
>>>> +	ti,ngpio = <144>;
>>>> +	ti,davinci-gpio-unbanked = <0>;
>>>> +	clocks = <&k2g_clks 0x001b 0x0>;
>>>> +	clock-names = "gpio";
>>>> +};
>>
>> If your going to talk about other Keystone 2 devices it would be helpful
>> to include an example for one of them since they have slightly different
>> properties.
> 
> Sure.
> 
>>>>
>>>
>>> regards
>>> Suman
>>>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux