Hi Jon,
On 25/07/17 23:06, Jon Mason wrote:
> Cache related issues with DMA rings and performance issues related to
> caching are being caused by not properly setting the "dma-coherent" flag
> in the device tree entries. Adding it here to correct the issue.
>
> Signed-off-by: Jon Mason <jon.mason@xxxxxxxxxxxx>
> Fixes: 5fa1026a3e4d ("ARM: dts: NSP: Add PL330 support")
> Fixes: 3107fa5bcfb2 ("ARM: dts: NSP: Add SD/MMC support")
> Fixes: 13d04f20935c ("ARM: dts: NSP: Add AMAC entries")
> Fixes: 5aeda7bf8a1e ("ARM: dts: NSP: Add and enable amac2")
> Fixes: 17d517172300 ("ARM: dts: NSP: Add mailbox (PDC) to NSP")
> Fixes: 1d8ece6639e1 ("ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree")
> Fixes: bf2289bedef4 ("ARM: dts: NSP: Add Switch Register Access Block node")
> Fixes: 0f9f27a36d09 ("ARM: dts: NSP: Add I2C support to the DT")
> Fixes: 8dbcad020f2e ("ARM: dts: nsp: Add sata device tree entry")
> Fixes: 522199029fdc ("ARM: dts: NSP: Fix PCIE DT issue")
> ---
> arch/arm/boot/dts/bcm-nsp.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> index 7204d1def23d..c8d734d9f5fc 100644
> --- a/arch/arm/boot/dts/bcm-nsp.dtsi
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -207,6 +207,7 @@
> clocks = <&iprocslow>;
> clock-names = "apb_pclk";
> #dma-cells = <1>;
> + dma-coherent;
Just to check, does this actually work? I ask because the pl330 driver
currently never sets src_cache_ctrl/dst_cache_ctrl to anything other
than noncacheable nonbufferable, so if your interconnect respects those
attributes this seems liable to make things go wrong under current
kernels, even if it is an accurate description of the hardware. If on
the other hand the interconnect does its own magic and will manage to
snoop caches appropriately regardless of AXI attributes, then I guess
it's fine, if a little scary ;)
Robin.
> };
>
> sdio: sdhci@21000 {
> @@ -215,6 +216,7 @@
> interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
> sdhci,auto-cmd12;
> clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -224,6 +226,7 @@
> <0x110000 0x1000>;
> reg-names = "amac_base", "idm_base";
> interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -233,6 +236,7 @@
> <0x111000 0x1000>;
> reg-names = "amac_base", "idm_base";
> interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -242,6 +246,7 @@
> <0x112000 0x1000>;
> reg-names = "amac_base", "idm_base";
> interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -252,6 +257,7 @@
> #mbox-cells = <1>;
> brcm,rx-status-len = <32>;
> brcm,use-bcm-hdr;
> + dma-coherent;
> };
>
> nand: nand@26000 {
> @@ -325,6 +331,7 @@
> compatible = "generic-ehci";
> reg = <0x2a000 0x100>;
> interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -332,6 +339,7 @@
> compatible = "generic-ohci";
> reg = <0x2b000 0x100>;
> interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -364,6 +372,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> + dma-coherent;
> status = "disabled";
>
> /* ports are defined in board DTS */
> @@ -376,6 +385,7 @@
> #size-cells = <0>;
> interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
> clock-frequency = <100000>;
> + dma-coherent;
> status = "disabled";
> };
>
> @@ -446,6 +456,7 @@
> interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> + dma-coherent;
> status = "disabled";
>
> sata0: sata-port@0 {
> @@ -483,6 +494,7 @@
> */
> ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
>
> + dma-coherent;
> status = "disabled";
>
> msi-parent = <&msi0>;
> @@ -519,6 +531,7 @@
> */
> ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
>
> + dma-coherent;
> status = "disabled";
>
> msi-parent = <&msi1>;
> @@ -555,6 +568,7 @@
> */
> ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
>
> + dma-coherent;
> status = "disabled";
>
> msi-parent = <&msi2>;
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
