Le 22/07/2017 21:19, Martin Blumenstingl a écrit : > From: Carlo Caione <carlo@xxxxxxxxxx> > > Booting the secondary CPU cores involves the following nodes/devices: > - SCU (Snoop-Control-Unit, for which we already have a DT node) > - a reset line for each CPU core, provided by the reset-controller > which is built into the clock-controller > - the PMU (power management unit) which controls the power of the CPU > cores > - a range in the SRAM specifically reserved for booting secondary CPU > cores > - the "enable-method" which activates booting the secondary CPU cores > > This adds all required nodes and properties to boot the secondary CPU > cores. > > Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/meson8b.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > index bc278da7df0d..c9e74d2fcbdf 100644 > --- a/arch/arm/boot/dts/meson8b.dtsi > +++ b/arch/arm/boot/dts/meson8b.dtsi > @@ -59,6 +59,8 @@ > compatible = "arm,cortex-a5"; > next-level-cache = <&L2>; > reg = <0x200>; > + enable-method = "amlogic,meson8b-smp"; > + resets = <&clkc RESETID_CPU0_SOFT_RESET>; > }; > > cpu@201 { > @@ -66,6 +68,8 @@ > compatible = "arm,cortex-a5"; > next-level-cache = <&L2>; > reg = <0x201>; > + enable-method = "amlogic,meson8b-smp"; > + resets = <&clkc RESETID_CPU1_SOFT_RESET>; > }; > > cpu@202 { > @@ -73,6 +77,8 @@ > compatible = "arm,cortex-a5"; > next-level-cache = <&L2>; > reg = <0x202>; > + enable-method = "amlogic,meson8b-smp"; > + resets = <&clkc RESETID_CPU2_SOFT_RESET>; > }; > > cpu@203 { > @@ -80,6 +86,8 @@ > compatible = "arm,cortex-a5"; > next-level-cache = <&L2>; > reg = <0x203>; > + enable-method = "amlogic,meson8b-smp"; > + resets = <&clkc RESETID_CPU3_SOFT_RESET>; > }; > }; > > @@ -90,6 +98,11 @@ > }; /* end of / */ > > &aobus { > + pmu: pmu@e0 { > + compatible = "amlogic,meson8b-pmu", "syscon"; > + reg = <0xe0 0x18>; > + }; > + > pinctrl_aobus: pinctrl@84 { > compatible = "amlogic,meson8b-aobus-pinctrl"; > reg = <0x84 0xc>; > @@ -157,6 +170,13 @@ > }; > }; > > +&ahb_sram { > + smp-sram@1ff80 { > + compatible = "amlogic,meson8b-smp-sram"; > + reg = <0x1ff80 0x8>; > + }; > +}; > + > ðmac { > clocks = <&clkc CLKID_ETH>; > clock-names = "stmmaceth"; > Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html