Hi Wolfram,
On 五, 7月 14, 2017 at 05:01:10下午 +0800, Baolin Wang wrote:
> This patch adds the binding documentation for Spreadtrum I2C
> controller device.
>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes since v3:
> - Add Ack from RobH.
>
> Changes since v2:
> - Change compatible strings to be SoC specific.
>
> Changes since v1:
> - No updates.
> ---
Could you apply this patchset if there are no other comments?
It is a long time since the v4 was send out. Thanks.
> Documentation/devicetree/bindings/i2c/i2c-sprd.txt | 31 ++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sprd.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> new file mode 100644
> index 0000000..60b7cda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> @@ -0,0 +1,31 @@
> +I2C for Spreadtrum platforms
> +
> +Required properties:
> +- compatible: Should be "sprd,sc9860-i2c".
> +- reg: Specify the physical base address of the controller and length
> + of memory mapped region.
> +- interrupts: Should contain I2C interrupt.
> +- clock-names: Should contain following entries:
> + "i2c" for I2C clock,
> + "source" for I2C source (parent) clock,
> + "enable" for I2C module enable clock.
> +- clocks: Should contain a clock specifier for each entry in clock-names.
> +- clock-frequency: Constains desired I2C bus clock frequency in Hz.
> +- #address-cells: Should be 1 to describe address cells for I2C device address.
> +- #size-cells: Should be 0 means no size cell for I2C device address.
> +
> +Optional properties:
> +- Child nodes conforming to I2C bus binding
> +
> +Examples:
> +i2c0: i2c@70500000 {
> + compatible = "sprd,sc9860-i2c";
> + reg = <0 0x70500000 0 0x1000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c", "source", "enable";
> + clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +};
> +
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
