[PATCHv3 2/4] Input: edt_ft5x06: use devm_* functions where appropriate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Simplify the error path and remove() function by using devm_*
functions for requesting gpios and irq and allocating memory.

Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
---
 drivers/input/touchscreen/edt-ft5x06.c |   66 +++++++++++---------------------
 1 files changed, 23 insertions(+), 43 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index af0d68b..583c053 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -366,7 +366,9 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
 	if (!tsdata->raw_buffer) {
 		tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
 				      sizeof(u16);
-		tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
+		tsdata->raw_buffer = devm_kzalloc(&client->dev,
+						tsdata->raw_bufsize,
+						GFP_KERNEL);
 		if (!tsdata->raw_buffer) {
 			error = -ENOMEM;
 			goto err_out;
@@ -623,8 +625,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
 
 	if (gpio_is_valid(reset_pin)) {
 		/* this pulls reset down, enabling the low active reset */
-		error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
-					 "edt-ft5x06 reset");
+		error = devm_gpio_request_one(&client->dev, reset_pin,
+					GPIOF_OUT_INIT_LOW,
+					"edt-ft5x06 reset");
 		if (error) {
 			dev_err(&client->dev,
 				"Failed to request GPIO %d as reset pin, error %d\n",
@@ -723,7 +726,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		return error;
 
 	if (gpio_is_valid(pdata->irq_pin)) {
-		error = gpio_request_one(pdata->irq_pin,
+		error = devm_gpio_request_one(&client->dev, pdata->irq_pin,
 					 GPIOF_IN, "edt-ft5x06 irq");
 		if (error) {
 			dev_err(&client->dev,
@@ -733,12 +736,11 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		}
 	}
 
-	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
-	input = input_allocate_device();
+	tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
+	input = devm_input_allocate_device(&client->dev);
 	if (!tsdata || !input) {
-		dev_err(&client->dev, "failed to allocate driver data.\n");
-		error = -ENOMEM;
-		goto err_free_mem;
+		dev_err(&client->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
 	}
 
 	mutex_init(&tsdata->mutex);
@@ -749,7 +751,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
 	if (error) {
 		dev_err(&client->dev, "touchscreen probe failed\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	edt_ft5x06_ts_get_defaults(tsdata, pdata);
@@ -776,27 +778,30 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	input_set_drvdata(input, tsdata);
 	i2c_set_clientdata(client, tsdata);
 
-	error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
-				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				     client->name, tsdata);
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					edt_ft5x06_ts_isr,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					client->name, tsdata);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
-		goto err_free_mem;
+		return error;
 	}
 
 	error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
 	if (error)
-		goto err_free_irq;
+		return error;
 
 	error = input_register_device(input);
-	if (error)
-		goto err_remove_attrs;
+	if (error) {
+		sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+		return error;
+	}
 
 	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
 	device_init_wakeup(&client->dev, 1);
@@ -806,40 +811,15 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 		pdata->irq_pin, pdata->reset_pin);
 
 	return 0;
-
-err_remove_attrs:
-	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
-err_free_irq:
-	free_irq(client->irq, tsdata);
-err_free_mem:
-	input_free_device(input);
-	kfree(tsdata);
-
-	if (gpio_is_valid(pdata->irq_pin))
-		gpio_free(pdata->irq_pin);
-
-	return error;
 }
 
 static int edt_ft5x06_ts_remove(struct i2c_client *client)
 {
-	const struct edt_ft5x06_platform_data *pdata =
-						dev_get_platdata(&client->dev);
 	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
 
 	edt_ft5x06_ts_teardown_debugfs(tsdata);
 	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
 
-	free_irq(client->irq, tsdata);
-	input_unregister_device(tsdata->input);
-
-	if (gpio_is_valid(pdata->irq_pin))
-		gpio_free(pdata->irq_pin);
-	if (gpio_is_valid(pdata->reset_pin))
-		gpio_free(pdata->reset_pin);
-
-	kfree(tsdata);
-
 	return 0;
 }
 
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux