Because of the restriction of the OF thermal framework, the thermal sensor will fail to probe if the thermal zone doesn't exist. Add a partial thermal zone which claims the H3 THS as the thermal sensor. The cooling device (CPU DVFS) is still not added as it's not ready, and the trip points are also not added yet. Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> --- arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index efe3a8e4f2af..551efecaab5d 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -125,6 +125,15 @@ }; }; + thermal-zones { + cpu-thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&ths>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html