Re: [PATCH v3 08/10] clk: sunxi-ng: support R40 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2017-05-29 15:34,Chen-Yu Tsai 写道:
Hi,

On Sat, May 27, 2017 at 06:23:06PM +0800, Icenowy Zheng wrote:
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
Changes in v3:
- Rebased on current linux-next.
Changes in v2:
- Fixes according to the SoC's user manual.

 drivers/clk/sunxi-ng/Kconfig              |   10 +
 drivers/clk/sunxi-ng/Makefile             |    1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1153 +++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-r40.h      |   68 ++
 include/dt-bindings/clock/sun8i-r40-ccu.h |  191 +++++
 include/dt-bindings/reset/sun8i-r40-ccu.h |  129 ++++
 6 files changed, 1552 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
 create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 67acef3d2494..c11ad3375907 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -157,6 +157,16 @@ config SUN8I_DE2_CCU
 	select SUNXI_CCU_DIV
 	select SUNXI_CCU_GATE

+config SUN8I_R40_CCU
+	bool "Support for the Allwinner R40 CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_NK
+	select SUNXI_CCU_NKM
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP

You seem to be missing a few, such as CCU_GATE, CCU_MUX, CCU_PHASE.
The list should at least be the same as the included headers.

+	default MACH_SUN8I
+
 config SUN9I_A80_CCU
 	bool "Support for the Allwinner A80 CCU"
 	select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0185c6ffadcb..217db667a994 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
 obj-$(CONFIG_SUN8I_DE2_CCU)	+= ccu-sun8i-de2.o
 obj-$(CONFIG_SUN8I_R_CCU)	+= ccu-sun8i-r.o
+obj-$(CONFIG_SUN8I_R40_CCU)	+= ccu-sun8i-r40.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-de.o
 obj-$(CONFIG_SUN9I_A80_CCU)	+= ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
new file mode 100644
index 000000000000..484a8956f59c
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-r40.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpu_clk, "pll-cpu",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */

P does not do /8. Please add a limit.

+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names
+ */
+#define SUN8I_R40_PLL_AUDIO_REG	0x008
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr0_clk, "pll-ddr0",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+/* According to the BSP driver, pll-periph{0,1} have M at 0:1 */

This is also mentioned in the user manual. You can leave it out.

Also, please leave a note mentioning that support for the SATA clock
output of the peripheral PLL is not implemented here.

+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph0_clk, "pll-periph0",
+				    "osc24M", 0x028,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_periph1_clk, "pll-periph1",
+				    "osc24M", 0x02c,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
+					"osc24M", 0x030,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);

Why do you have this set for only some of the PLLs? Either you need it
for all of them, or you don't need it for any of them.

+
+/*
+ * For the special bit in gate part, please see the BSP source code at + * https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
+ */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
+				    "osc24M", 0x034,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31) | BIT(14),	/* gate */
+				    BIT(28),	/* lock */
+				    0);

I think this is a somewhat simplified approach. From what I understand
of the user manual, the SATA clock path look like:


[ PLL-PERIPH0-SATA ] -\
                      mux @ 0x34 bit 30 --- gate @ 0x34 bit 14 --- ...
[ PLL-SATA ] ---------/

... from above ... ------\
                         mux @ 0xc8 bit 24 --- gate @ 0xc8 bit 31
[ external oscillator ] -/

If you choose to simplify the implementation, please include a detailed
note as to why you chose to do so, and the validity of the simplification.

I think it can be fully implemented...

But how should I call the internal clock controlled by the mux @ 0x34 bit 30?


+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+					"osc24M", 0x038,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static const char * const pll_mipi_parents[] = { "pll-video0", "pll-video1" };

pll-video1 is not listed in the manual.

+static SUNXI_CCU_NKM_WITH_MUX_GATE_LOCK(pll_mipi_clk, "pll-mipi",
+					pll_mipi_parents, 0x040,
+					8, 4,	/* N */
+					4, 2,	/* K */
+					0, 4,	/* M */
+					21, 0,	/* mux */
+					BIT(31) | BIT(23) | BIT(22), /* gate */
+					BIT(28),	/* lock */
+					CLK_SET_RATE_UNGATE);

Please leave a note mentioning that you only implement support for the
"MIPI" mode.
You should also force it at probe time. See the driver for the A31.

+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+					"osc24M", 0x0048,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
+				   "osc24M", 0x04c,
+				   8, 7,	/* N */

N has minimum and maximum limits.

+				   0, 2,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   CLK_SET_RATE_UNGATE);
+
+static const char * const cpu_parents[] = { "osc32k", "osc24M",
+					     "pll-cpu", "pll-cpu" };
+static SUNXI_CCU_MUX(cpu_clk, "cpu", cpu_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi", "pll-periph0" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0-2x",
+					     "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk,	"bus-mipi-dsi",	"ahb1",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_mmc3_clk,	"bus-mmc3",	"ahb1",
+		      0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb1",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk,	"bus-ts",	"ahb1",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk,	"bus-spi2",	"ahb1",
+		      0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk,	"bus-spi3",	"ahb1",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_sata_clk,	"bus-sata",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk,	"bus-ehci1",	"ahb1",
+		      0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk,	"bus-ehci2",	"ahb1",
+		      0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk,	"bus-ohci1",	"ahb1",
+		      0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk,	"bus-ohci2",	"ahb1",
+		      0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_de_mp_clk,	"bus-de-mp",	"ahb1",
+		      0x064, BIT(2), 0);

The mixer processor is unrelated to the display engine.
Please drop the "de" part of the name.

+static SUNXI_CCU_GATE(bus_deinterlace_clk,	"bus-deinterlace",	"ahb1",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi0_clk,	"bus-csi0",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_csi1_clk,	"bus-csi1",	"ahb1",
+		      0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_slow_clk,	"bus-hdmi-slow",	"ahb1",
+		      0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk,	"bus-hdmi",	"ahb1",
+		      0x064, BIT(11), 0);

Please stick to the names in the user manual.
They are hdmi0 and hdmi1.

+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk,	"bus-tve0",	"ahb1",
+		      0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_tve1_clk,	"bus-tve1",	"ahb1",
+		      0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tve_top_clk,	"bus-tve-top",	"ahb1",
+		      0x064, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk,	"bus-gmac",	"ahb1",
+		      0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_tvd0_clk,	"bus-tvd0",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_tvd1_clk,	"bus-tvd1",	"ahb1",
+		      0x064, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_tvd2_clk,	"bus-tvd2",	"ahb1",
+		      0x064, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_tvd3_clk,	"bus-tvd3",	"ahb1",
+		      0x064, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_tvd_top_clk,	"bus-tvd-top",	"ahb1",
+		      0x064, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk,	"bus-tcon1",	"ahb1",
+		      0x064, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_tve0_tcon_clk,	"bus-tve0-tcon",	"ahb1",
+		      0x064, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_tve1_tcon_clk,	"bus-tve1-tcon",	"ahb1",
+		      0x064, BIT(29), 0);

Please stick to the names used in the user manual.
They are "tcon-lcdN" and "tcon-tvN".

+static SUNXI_CCU_GATE(bus_tcon_top_clk,	"bus-tcon-top",	"ahb1",
+		      0x064, BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb1",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk,	"bus-ac97",	"apb1",
+		      0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ir0_clk,	"bus-ir0",	"apb1",
+		      0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ir1_clk,	"bus-ir1",	"apb1",
+		      0x068, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_ths_clk,	"bus-ths",	"apb1",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_keypad_clk,	"bus-keypad",	"apb1",
+		      0x068, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk,	"bus-i2s2",	"apb1",
+		      0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk,	"bus-i2c3",	"apb2",
+		      0x06c, BIT(3), 0);
+/*
+ * In datasheet here's "Reserved", however the gate exists in BSP soucre
+ * code.
+ */
+static SUNXI_CCU_GATE(bus_can_clk,	"bus-can",	"apb2",
+		      0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_scr_clk,	"bus-scr",	"apb2",
+		      0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ps20_clk,	"bus-ps20",	"apb2",
+		      0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ps21_clk,	"bus-ps21",	"apb2",
+		      0x06c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk,	"bus-i2c4",	"apb2",
+		      0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk,	"bus-uart4",	"apb2",
+		      0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk,	"bus-uart5",	"apb2",
+		      0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_uart6_clk,	"bus-uart6",	"apb2",
+		      0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_uart7_clk,	"bus-uart7",	"apb2",
+		      0x06c, BIT(23), 0);
+
+/* Educated guess: the BSP clock driver do not have this clock */

The gate is documented in the user manual. What part is a guess?

+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ths_clk, "ths", "osc24M",
+			     0x074, 0, 2, BIT(31), 0);

This clock has a mux. Even with only one parent, you should still
implement the mux, so the kernel can recover from cases where some
other piece of software left it in a bad state.

Also the divider is of the power of two type.

+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */

The mux is 4 bits wide.

+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x",
+					   "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0ac,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					    "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+			       0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+			       0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", i2s_parents,
+			       0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", i2s_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const keypad_parents[] = { "osc24M", "osc32k", };

The parents are not sequential. You need a mux table here.

+static SUNXI_CCU_MP_WITH_MUX_GATE(keypad_clk, "keypad", keypad_parents, 0x0c4,
+				  0, 5,		/* M */
+				  16, 2,	/* P */
+				  25, 1,	/* mux */

Mux is 2 bits wide.

+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const sata_parents[] = { "pll-sata", "sata-ext", };
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+			       0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk,	"usb-phy2",	"osc24M",
+		      0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"osc24M",
+		      0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk,	"usb-ohci2",	"osc24M",
+		      0x0cc, BIT(18), 0);

Why bother with the 3 clocks below, if you aren't going to use them as parents for the 3 usb-ohci gates above? The user manual states the gates are for both
48M and 12M clocks.

+
+static const char * const usb_ohci12m_parents[] = { "osc24M-2x", "osc24M",
+						    "osc32k" };

You should have pre-dividers here so the clk subsystem can report correct
clk rates.

+static SUNXI_CCU_MUX(usb_ohci0_12m_clk, "usb-ohci0-12m", usb_ohci12m_parents,
+		     0x0cc, 20, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci1_12m_clk, "usb-ohci1-12m", usb_ohci12m_parents,
+		     0x0cc, 22, 2, 0);
+static SUNXI_CCU_MUX(usb_ohci2_12m_clk, "usb-ohci2-12m", usb_ohci12m_parents,
+		     0x0cc, 24, 2, 0);
+
+static const char * const ir_parents[] = { "osc24M", "pll-periph0",
+					   "pll-periph1", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_clk, "ir0", ir_parents, 0x0d0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_clk, "ir1", ir_parents, 0x0d4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 2, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk,	"dram-csi0",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk,	"dram-csi1",	"dram",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
+		      0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk,	"dram-tvd",	"dram",
+		      0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_de_mp_clk,	"dram-de-mp",	"dram",
+		      0x100, BIT(5), 0);

Same thing about the mixer processor as before.

+static SUNXI_CCU_GATE(dram_deinterlace_clk, "dram-deinterlace", "dram",
+		      0x100, BIT(6), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+				 0x108, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video0", "pll-video1",
+					     "pll-video0-2x", "pll-video1-2x",
+					     "pll-mipi" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon_parents,
+			       0x110, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon_parents,
+			       0x114, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve0_clk, "tcon-tve0", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_tve1_clk, "tcon-tve1", tcon_parents,
+				 0x11c, 0, 4, 24, 3, BIT(31), 0);

Again, please stick to the names used by the user manual.

+
+static const char * const deinterlace_parents[] = { "pll-periph0",
+						    "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+				 deinterlace_parents, 0x124, 0, 4, 24, 3,
+				 BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video",
+						 "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", csi_mclk_parents,
+				 0x130, 0, 5, 8, 3, BIT(15), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(adda_clk,		"adda",		"pll-audio",
+		      0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(adda_4x_clk,	"adda-4x",	"pll-audio-4x",
+		      0x140, BIT(30), CLK_SET_RATE_PARENT);

adda-4x is not listed in the user manual. Does it really exist?
Is it used anywhere?

+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+				 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk,	"hdmi-slow",	"osc24M",
+		      0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+					     "pll-ddr0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x15c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */

Curiously, the formula for clk rate calculation does not include this
factor.

+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_IS_CRITICAL);
+
+static const char * const mipi_dsi_parents[] = { "pll-video0", "pll-video1",
+						 "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", mipi_dsi_parents,
+				 0x168, 0, 4, 8, 2, BIT(15), 0);

This is called "dsi-dphy" in the user manual. Looking at the A31,
it had "dsi-sclk" in the upper 16 bits. So please use "dsi-dphy"
or "mipi-dsi-dphy" here.

+
+static SUNXI_CCU_M_WITH_MUX_GATE(tve0_clk, "tve0", tcon_parents,
+				 0x180, 0, 4, 24, 3, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tve1_clk, "tve1", tcon_parents,
+				 0x184, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tvd_parents[] = { "pll-video0", "pll-video1",
+					    "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd0_clk, "tvd0", tvd_parents,
+				 0x188, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd1_clk, "tvd1", tvd_parents,
+				 0x18c, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd2_clk, "tvd2", tvd_parents,
+				 0x190, 0, 4, 24, 2, BIT(31), 0);
+static SUNXI_CCU_M_WITH_MUX_GATE(tvd3_clk, "tvd3", tvd_parents,
+				 0x194, 0, 4, 24, 2, BIT(31), 0);

The mux is 3 bits wide for the tvd clocks.

+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+			     0x1a0, 0, 3, BIT(31), 0);

You should probably have CLK_SET_RATE_PARENT here.

+
+static const char * const out_parents[] = { "osc24M-32k", "osc32k", "osc24M" };

Please use pre-dividers instead of "osc24M-32k".

+static SUNXI_CCU_MP_WITH_MUX_GATE(outa_clk, "outa", out_parents, 0x1f0,
+				  8, 5,		/* M */
+				  20, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+static SUNXI_CCU_MP_WITH_MUX_GATE(outb_clk, "outb", out_parents, 0x1f4,
+				  8, 5,		/* M */
+				  20, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static struct ccu_common *sun8i_r40_ccu_clks[] = {
+	&pll_cpu_clk.common,
+	&pll_audio_base_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_video1_clk.common,
+	&pll_sata_clk.common,
+	&pll_gpu_clk.common,
+	&pll_mipi_clk.common,
+	&pll_de_clk.common,
+	&pll_ddr1_clk.common,
+	&cpu_clk.common,
+	&axi_clk.common,
+	&ahb1_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&bus_ce_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_mmc3_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_ts_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_spi2_clk.common,
+	&bus_spi3_clk.common,
+	&bus_sata_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_ehci2_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ohci2_clk.common,
+	&bus_ve_clk.common,
+	&bus_de_mp_clk.common,
+	&bus_deinterlace_clk.common,
+	&bus_csi0_clk.common,
+	&bus_csi1_clk.common,
+	&bus_hdmi_slow_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_de_clk.common,
+	&bus_tve0_clk.common,
+	&bus_tve1_clk.common,
+	&bus_tve_top_clk.common,
+	&bus_gmac_clk.common,
+	&bus_gpu_clk.common,
+	&bus_tvd0_clk.common,
+	&bus_tvd1_clk.common,
+	&bus_tvd2_clk.common,
+	&bus_tvd3_clk.common,
+	&bus_tvd_top_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_tcon1_clk.common,
+	&bus_tve0_tcon_clk.common,
+	&bus_tve1_tcon_clk.common,
+	&bus_tcon_top_clk.common,
+	&bus_codec_clk.common,
+	&bus_spdif_clk.common,
+	&bus_ac97_clk.common,
+	&bus_pio_clk.common,
+	&bus_ir0_clk.common,
+	&bus_ir1_clk.common,
+	&bus_ths_clk.common,
+	&bus_keypad_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&bus_can_clk.common,
+	&bus_scr_clk.common,
+	&bus_ps20_clk.common,
+	&bus_ps21_clk.common,
+	&bus_i2c4_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&bus_uart5_clk.common,
+	&bus_uart6_clk.common,
+	&bus_uart7_clk.common,
+	&bus_dbg_clk.common,
+	&ths_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&mmc3_clk.common,
+	&ts_clk.common,
+	&ce_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&spi3_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&ac97_clk.common,
+	&spdif_clk.common,
+	&keypad_clk.common,
+	&sata_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_phy2_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_ohci2_clk.common,
+	&usb_ohci0_12m_clk.common,
+	&usb_ohci1_12m_clk.common,
+	&usb_ohci2_12m_clk.common,
+	&ir0_clk.common,
+	&ir1_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi0_clk.common,
+	&dram_csi1_clk.common,
+	&dram_ts_clk.common,
+	&dram_tvd_clk.common,
+	&dram_de_mp_clk.common,
+	&dram_deinterlace_clk.common,
+	&de_clk.common,
+	&de_mp_clk.common,
+	&tcon0_clk.common,
+	&tcon1_clk.common,
+	&tcon_tve0_clk.common,
+	&tcon_tve1_clk.common,
+	&deinterlace_clk.common,
+	&csi1_mclk_clk.common,
+	&csi_sclk_clk.common,
+	&csi0_mclk_clk.common,
+	&ve_clk.common,
+	&adda_clk.common,
+	&adda_4x_clk.common,
+	&avs_clk.common,
+	&hdmi_clk.common,
+	&hdmi_slow_clk.common,
+	&mbus_clk.common,
+	&mipi_dsi_clk.common,
+	&tve0_clk.common,
+	&tve1_clk.common,
+	&tvd0_clk.common,
+	&tvd1_clk.common,
+	&tvd2_clk.common,
+	&tvd3_clk.common,
+	&gpu_clk.common,
+	&outa_clk.common,
+	&outb_clk.common,
+};
+
+/* We hardcode the divider to 4 for now */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+			"pll-periph1", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+			"pll-video0", 1, 2, 0);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+			"pll-video1", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_2x_clk, "osc24M-2x",
+			"osc24M", 1, 2, 0);
+static CLK_FIXED_FACTOR(osc24m_32k_clk, "osc24M-32k",
+			"osc24M", 750, 1, 0);

As mentioned above, please drop the last one.

+
+static struct clk_hw_onecell_data sun8i_r40_hw_clks = {
+	.hws	= {
+		[CLK_OSC24M_2X]		= &osc24m_2x_clk.hw,
+		[CLK_OSC24M_32K]	= &osc24m_32k_clk.hw,
+		[CLK_PLL_CPU]		= &pll_cpu_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_SATA]		= &pll_sata_clk.common.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_MIPI]		= &pll_mipi_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_DDR1]		= &pll_ddr1_clk.common.hw,
+		[CLK_CPU]		= &cpu_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_MMC3]		= &bus_mmc3_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_SPI2]		= &bus_spi2_clk.common.hw,
+		[CLK_BUS_SPI3]		= &bus_spi3_clk.common.hw,
+		[CLK_BUS_SATA]		= &bus_sata_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_DE_MP]		= &bus_de_mp_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_BUS_CSI0]		= &bus_csi0_clk.common.hw,
+		[CLK_BUS_CSI1]		= &bus_csi1_clk.common.hw,
+		[CLK_BUS_HDMI_SLOW]	= &bus_hdmi_slow_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_TVE0]		= &bus_tve0_clk.common.hw,
+		[CLK_BUS_TVE1]		= &bus_tve1_clk.common.hw,
+		[CLK_BUS_TVE_TOP]	= &bus_tve_top_clk.common.hw,
+		[CLK_BUS_GMAC]		= &bus_gmac_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_TVD0]		= &bus_tvd0_clk.common.hw,
+		[CLK_BUS_TVD1]		= &bus_tvd1_clk.common.hw,
+		[CLK_BUS_TVD2]		= &bus_tvd2_clk.common.hw,
+		[CLK_BUS_TVD3]		= &bus_tvd3_clk.common.hw,
+		[CLK_BUS_TVD_TOP]	= &bus_tvd_top_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_TCON1]		= &bus_tcon1_clk.common.hw,
+		[CLK_BUS_TVE0_TCON]	= &bus_tve0_tcon_clk.common.hw,
+		[CLK_BUS_TVE1_TCON]	= &bus_tve1_tcon_clk.common.hw,
+		[CLK_BUS_TCON_TOP]	= &bus_tcon_top_clk.common.hw,
+		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_AC97]		= &bus_ac97_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_IR0]		= &bus_ir0_clk.common.hw,
+		[CLK_BUS_IR1]		= &bus_ir1_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_BUS_KEYPAD]	= &bus_keypad_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_CAN]		= &bus_can_clk.common.hw,
+		[CLK_BUS_SCR]		= &bus_scr_clk.common.hw,
+		[CLK_BUS_PS20]		= &bus_ps20_clk.common.hw,
+		[CLK_BUS_PS21]		= &bus_ps21_clk.common.hw,
+		[CLK_BUS_I2C4]		= &bus_i2c4_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_BUS_UART5]		= &bus_uart5_clk.common.hw,
+		[CLK_BUS_UART6]		= &bus_uart6_clk.common.hw,
+		[CLK_BUS_UART7]		= &bus_uart7_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_THS]		= &ths_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC3]		= &mmc3_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_SPI3]		= &spi3_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_AC97]		= &ac97_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_KEYPAD]		= &keypad_clk.common.hw,
+		[CLK_SATA]		= &sata_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_PHY2]		= &usb_phy2_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_OHCI2]		= &usb_ohci2_clk.common.hw,
+		[CLK_USB_OHCI0_12M]	= &usb_ohci0_12m_clk.common.hw,
+		[CLK_USB_OHCI1_12M]	= &usb_ohci1_12m_clk.common.hw,
+		[CLK_USB_OHCI2_12M]	= &usb_ohci2_12m_clk.common.hw,
+		[CLK_IR0]		= &ir0_clk.common.hw,
+		[CLK_IR1]		= &ir1_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI0]		= &dram_csi0_clk.common.hw,
+		[CLK_DRAM_CSI1]		= &dram_csi1_clk.common.hw,
+		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
+		[CLK_DRAM_TVD]		= &dram_tvd_clk.common.hw,
+		[CLK_DRAM_DE_MP]	= &dram_de_mp_clk.common.hw,
+		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_DE_MP]		= &de_mp_clk.common.hw,
+		[CLK_TCON0]		= &tcon0_clk.common.hw,
+		[CLK_TCON1]		= &tcon1_clk.common.hw,
+		[CLK_TCON_TVE0]		= &tcon_tve0_clk.common.hw,
+		[CLK_TCON_TVE1]		= &tcon_tve1_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_ADDA]		= &adda_clk.common.hw,
+		[CLK_ADDA_4X]		= &adda_4x_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_SLOW]		= &hdmi_slow_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_DSI]		= &mipi_dsi_clk.common.hw,
+		[CLK_TVE0]		= &tve0_clk.common.hw,
+		[CLK_TVE1]		= &tve1_clk.common.hw,
+		[CLK_TVD0]		= &tvd0_clk.common.hw,
+		[CLK_TVD1]		= &tvd1_clk.common.hw,
+		[CLK_TVD2]		= &tvd2_clk.common.hw,
+		[CLK_TVD3]		= &tvd3_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_OUTA]		= &outa_clk.common.hw,
+		[CLK_OUTB]		= &outb_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_r40_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		=  { 0x0cc, BIT(2) },
+

There is also a reset control for the DRAM controller at bit 31
of register 0xf4.

+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_MIPI_DSI]	=  { 0x2c0, BIT(1) },
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_MMC3]		=  { 0x2c0, BIT(11) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_TS]		=  { 0x2c0, BIT(18) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_SPI2]		=  { 0x2c0, BIT(22) },
+	[RST_BUS_SPI3]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_SATA]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(25) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI1]		=  { 0x2c0, BIT(27) },
+	[RST_BUS_EHCI2]		=  { 0x2c0, BIT(28) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
+	[RST_BUS_OHCI1]		=  { 0x2c0, BIT(30) },
+	[RST_BUS_OHCI2]		=  { 0x2c0, BIT(31) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_DE_MP]		=  { 0x2c4, BIT(2) },

Same thing about the MP's name.

+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI0]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_CSI1]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_HDMI_SLOW]	=  { 0x2c4, BIT(10) },
+	[RST_BUS_HDMI]		=  { 0x2c4, BIT(11) },

Same thing about the HDMI's names.

+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_TVE0]		=  { 0x2c4, BIT(13) },
+	[RST_BUS_TVE1]		=  { 0x2c4, BIT(14) },
+	[RST_BUS_TVE_TOP]	=  { 0x2c4, BIT(15) },
+	[RST_BUS_GMAC]		=  { 0x2c4, BIT(17) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_TVD0]		=  { 0x2c4, BIT(21) },
+	[RST_BUS_TVD1]		=  { 0x2c4, BIT(22) },
+	[RST_BUS_TVD2]		=  { 0x2c4, BIT(23) },
+	[RST_BUS_TVD3]		=  { 0x2c4, BIT(24) },
+	[RST_BUS_TVD_TOP]	=  { 0x2c4, BIT(25) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(26) },
+	[RST_BUS_TCON1]		=  { 0x2c4, BIT(27) },
+	[RST_BUS_TCON_TVE0]	=  { 0x2c4, BIT(28) },
+	[RST_BUS_TCON_TVE1]	=  { 0x2c4, BIT(29) },

Same thing about the TCON names.

+	[RST_BUS_TCON_TOP]	=  { 0x2c4, BIT(30) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_LVDS]		=  { 0x2c8, BIT(0) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_AC97]		=  { 0x2d0, BIT(2) },
+	[RST_BUS_IR0]		=  { 0x2d0, BIT(6) },
+	[RST_BUS_IR1]		=  { 0x2d0, BIT(7) },
+	[RST_BUS_THS]		=  { 0x2d0, BIT(8) },
+	[RST_BUS_KEYPAD]	=  { 0x2d0, BIT(10) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+	[RST_BUS_I2S2]		=  { 0x2d0, BIT(14) },
+
+	[RST_BUS_I2C0]		=  { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d8, BIT(2) },
+	[RST_BUS_I2C3]		=  { 0x2d8, BIT(3) },
+	[RST_BUS_CAN]		=  { 0x2d8, BIT(4) },

Please add a note for CAN like you did with the bus gate.

+	[RST_BUS_SCR]		=  { 0x2d8, BIT(5) },
+	[RST_BUS_PS20]		=  { 0x2d8, BIT(6) },
+	[RST_BUS_PS21]		=  { 0x2d8, BIT(7) },
+	[RST_BUS_I2C4]		=  { 0x2d8, BIT(15) },
+	[RST_BUS_UART0]		=  { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		=  { 0x2d8, BIT(20) },
+	[RST_BUS_UART5]		=  { 0x2d8, BIT(21) },
+	[RST_BUS_UART6]		=  { 0x2d8, BIT(22) },
+	[RST_BUS_UART7]		=  { 0x2d8, BIT(23) },
+};
+
+static const struct sunxi_ccu_desc sun8i_r40_ccu_desc = {
+	.ccu_clks	= sun8i_r40_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_r40_ccu_clks),
+
+	.hw_clks	= &sun8i_r40_hw_clks,
+
+	.resets		= sun8i_r40_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_r40_ccu_resets),
+};
+
+static struct ccu_mux_nb sun8i_r40_cpu_nb = {
+	.common		= &cpu_clk.common,
+	.cm		= &cpu_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL-Audio-1x divider to 4 */
+	val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+	val &= ~GENMASK(19, 16);
+	writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_r40_ccu_desc);
+
+	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
+				  &sun8i_r40_cpu_nb);
+}
+CLK_OF_DECLARE(sun8i_r40_ccu, "allwinner,sun8i-r40-ccu",
+	       sun8i_r40_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.h b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
new file mode 100644
index 000000000000..be30eb662d78
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_R40_H_
+#define _CCU_SUN8I_R40_H_
+
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+#define CLK_OSC24M_2X		0

As mentioned, please drop this one.

+#define CLK_OSC24M_32K		1
+#define CLK_PLL_CPU		2
+#define CLK_PLL_AUDIO_BASE	3
+#define CLK_PLL_AUDIO		4
+#define CLK_PLL_AUDIO_2X	5
+#define CLK_PLL_AUDIO_4X	6
+#define CLK_PLL_AUDIO_8X	7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VE		10
+#define CLK_PLL_DDR0		11
+#define CLK_PLL_PERIPH0		12
+#define CLK_PLL_PERIPH0_2X	13
+#define CLK_PLL_PERIPH1		14
+#define CLK_PLL_PERIPH1_2X	15
+#define CLK_PLL_VIDEO1		16
+#define CLK_PLL_VIDEO1_2X	17
+#define CLK_PLL_SATA		18
+#define CLK_PLL_GPU		19
+#define CLK_PLL_MIPI		20
+#define CLK_PLL_DE		21
+#define CLK_PLL_DDR1		22
+
+/* The CPU clock is exported */
+
+#define CLK_AXI			24
+#define CLK_AHB1		25
+#define CLK_APB1		26
+#define CLK_APB2		27
+
+/* All the bus gates are exported */
+
+/* The first bunch of module clocks are exported */
+
+#define CLK_DRAM		134
+
+/* All the DRAM gates are exported */
+
+/* Some more module clocks are exported */
+
+#define CLK_MBUS		158
+
+/* Another bunch of module clocks are exported */
+
+#define CLK_NUMBER		(CLK_OUTB + 1)
+
+#endif /* _CCU_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/clock/sun8i-r40-ccu.h b/include/dt-bindings/clock/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..a907d841496d
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@xxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_R40_H_
+#define _DT_BINDINGS_CLK_SUN8I_R40_H_
+
+#define CLK_CPU			23
+
+#define CLK_BUS_MIPI_DSI	28
+#define CLK_BUS_CE		29
+#define CLK_BUS_DMA		30
+#define CLK_BUS_MMC0		31
+#define CLK_BUS_MMC1		32
+#define CLK_BUS_MMC2		33
+#define CLK_BUS_MMC3		34
+#define CLK_BUS_NAND		35
+#define CLK_BUS_DRAM		36
+#define CLK_BUS_EMAC		37
+#define CLK_BUS_TS		38
+#define CLK_BUS_HSTIMER		39
+#define CLK_BUS_SPI0		40
+#define CLK_BUS_SPI1		41
+#define CLK_BUS_SPI2		42
+#define CLK_BUS_SPI3		43
+#define CLK_BUS_SATA		44
+#define CLK_BUS_OTG		45
+#define CLK_BUS_EHCI0		46
+#define CLK_BUS_EHCI1		47
+#define CLK_BUS_EHCI2		48
+#define CLK_BUS_OHCI0		49
+#define CLK_BUS_OHCI1		50
+#define CLK_BUS_OHCI2		51
+#define CLK_BUS_VE		52
+#define CLK_BUS_DE_MP		53

MP name...

+#define CLK_BUS_DEINTERLACE	54
+#define CLK_BUS_CSI0		55
+#define CLK_BUS_CSI1		56
+#define CLK_BUS_HDMI_SLOW	57
+#define CLK_BUS_HDMI		58

Names...

+#define CLK_BUS_DE		59
+#define CLK_BUS_TVE0		60
+#define CLK_BUS_TVE1		61
+#define CLK_BUS_TVE_TOP		62
+#define CLK_BUS_GMAC		63
+#define CLK_BUS_GPU		64
+#define CLK_BUS_TVD0		65
+#define CLK_BUS_TVD1		66
+#define CLK_BUS_TVD2		67
+#define CLK_BUS_TVD3		68
+#define CLK_BUS_TVD_TOP		69

+#define CLK_BUS_TCON0		70
+#define CLK_BUS_TCON1		71
+#define CLK_BUS_TVE0_TCON	72
+#define CLK_BUS_TVE1_TCON	73

Names...

+#define CLK_BUS_TCON_TOP	74
+#define CLK_BUS_CODEC		75
+#define CLK_BUS_SPDIF		76
+#define CLK_BUS_AC97		77
+#define CLK_BUS_PIO		78
+#define CLK_BUS_IR0		79
+#define CLK_BUS_IR1		80
+#define CLK_BUS_THS		81
+#define CLK_BUS_KEYPAD		82
+#define CLK_BUS_I2S0		83
+#define CLK_BUS_I2S1		84
+#define CLK_BUS_I2S2		85
+#define CLK_BUS_I2C0		86
+#define CLK_BUS_I2C1		87
+#define CLK_BUS_I2C2		88
+#define CLK_BUS_I2C3		89
+#define CLK_BUS_CAN		90
+#define CLK_BUS_SCR		91
+#define CLK_BUS_PS20		92
+#define CLK_BUS_PS21		93
+#define CLK_BUS_I2C4		94
+#define CLK_BUS_UART0		95
+#define CLK_BUS_UART1		96
+#define CLK_BUS_UART2		97
+#define CLK_BUS_UART3		98
+#define CLK_BUS_UART4		99
+#define CLK_BUS_UART5		100
+#define CLK_BUS_UART6		101
+#define CLK_BUS_UART7		102
+#define CLK_BUS_DBG		103
+
+#define CLK_THS			104
+#define CLK_NAND		105
+#define CLK_MMC0		106
+#define CLK_MMC1		107
+#define CLK_MMC2		108
+#define CLK_MMC3		109
+#define CLK_TS			110
+#define CLK_CE			111
+#define CLK_SPI0		112
+#define CLK_SPI1		113
+#define CLK_SPI2		114
+#define CLK_SPI3		115
+#define CLK_I2S0		116
+#define CLK_I2S1		117
+#define CLK_I2S2		118
+#define CLK_AC97		119
+#define CLK_SPDIF		120
+#define CLK_KEYPAD		121
+#define CLK_SATA		122
+#define CLK_USB_PHY0		123
+#define CLK_USB_PHY1		124
+#define CLK_USB_PHY2		125
+#define CLK_USB_OHCI0		126
+#define CLK_USB_OHCI1		127
+#define CLK_USB_OHCI2		128
+#define CLK_USB_OHCI0_12M	129
+#define CLK_USB_OHCI1_12M	130
+#define CLK_USB_OHCI2_12M	131

These 3 should not be exported.

+#define CLK_IR0			132
+#define CLK_IR1			133
+
+#define CLK_DRAM_VE		135
+#define CLK_DRAM_CSI0		136
+#define CLK_DRAM_CSI1		137
+#define CLK_DRAM_TS		138
+#define CLK_DRAM_TVD		139
+#define CLK_DRAM_DE_MP		140

MP name...

+#define CLK_DRAM_DEINTERLACE	141
+#define CLK_DE			142
+#define CLK_DE_MP		143

MP name...

+#define CLK_TCON0		144
+#define CLK_TCON1		145
+#define CLK_TCON_TVE0		146
+#define CLK_TCON_TVE1		147

Names...

+#define CLK_DEINTERLACE		148
+#define CLK_CSI1_MCLK		149
+#define CLK_CSI_SCLK		150
+#define CLK_CSI0_MCLK		151
+#define CLK_VE			152
+#define CLK_ADDA		153

+#define CLK_ADDA_4X		154

Nonexistent.

+#define CLK_AVS			155
+#define CLK_HDMI		156
+#define CLK_HDMI_SLOW		157
+
+#define CLK_MIPI_DSI		159
+#define CLK_TVE0		160
+#define CLK_TVE1		161
+#define CLK_TVD0		162
+#define CLK_TVD1		163
+#define CLK_TVD2		164
+#define CLK_TVD3		165
+#define CLK_GPU			166
+#define CLK_OUTA		167
+#define CLK_OUTB		168
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_R40_H_ */
diff --git a/include/dt-bindings/reset/sun8i-r40-ccu.h b/include/dt-bindings/reset/sun8i-r40-ccu.h
new file mode 100644
index 000000000000..a7001f34b0b9
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-r40-ccu.h

Name corrections apply to this file as well.

Regards
ChenYu

--
2.12.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux