On 07/11, Chunyan Zhang wrote:
> Introduce a new binding with its documentation for Spreadtrum clock
> sub-framework.
>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/clock/sprd.txt | 36 ++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt
> new file mode 100644
> index 0000000..c6f3abf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sprd.txt
> @@ -0,0 +1,36 @@
> +Spreadtrum Clock Binding
> +------------------------
> +
> +Required properties:
> +- compatible: must contain the following compatible:
> + - "sprd,sc9860-clk" (only support SC9860 for the time being)
> +
> +- reg: Must contain the registers base address and length.
> + Clocks on most of Spreadtrum's SoCs were designed to locate in a few
> + different address areas, so there would be more than one items under
> + this property.
> +
> +- #clock-cells: must be 1
> +
> +Example:
> +
> +clk: clk {
clock-controller for the node name?
> + compatible = "sprd,sc9860-clk";
> + #clock-cells = <1>;
> + reg = <0 0x20000000 0 0x400>,
> + <0 0x20210000 0 0x3000>,
> + <0 0x402b0000 0 0x4000>,
> + <0 0x402d0000 0 0x400>,
> + <0 0x402e0000 0 0x4000>,
> + <0 0x40400000 0 0x400>,
> + <0 0x40880000 0 0x400>,
> + <0 0x415e0000 0 0x400>,
> + <0 0x60200000 0 0x400>,
> + <0 0x61000000 0 0x400>,
> + <0 0x61100000 0 0x3000>,
> + <0 0x62000000 0 0x4000>,
> + <0 0x62100000 0 0x4000>,
> + <0 0x63000000 0 0x400>,
> + <0 0x63100000 0 0x3000>,
> + <0 0x70b00000 0 0x3000>;
I'm still suspecting that we need multiple nodes, for each device
the clocks are embedded in. Mediatek SoCs have a similar design,
and they have many nodes. Does it happen to always be in some
fixed offset inside the different devices that use the clks?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
