Add pin configuration for Ethernet. Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx> --- arch/arm/boot/dts/r7s72100-rskrza1.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index 5fac0f82d742..cedf887e809a 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -55,6 +55,29 @@ pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ <RZA1_PINMUX(3, 2, 4)>; /* RxD2 */ }; + + /* Ethernet */ + ether_pins: ether { + /* Ethernet on Ports 1,2,3,5 */ + pinmux = <RZA1_PINMUX(1, 14, 4)>, /* ET_COL */ + <RZA1_PINMUX(5, 9, 2)>, /* ET_MDC */ + <RZA1_PINMUX(3, 3, 2)>, /* ET_MDIO */ + <RZA1_PINMUX(3, 4, 2)>, /* ET_RXCLK */ + <RZA1_PINMUX(3, 5, 2)>, /* ET_RXER */ + <RZA1_PINMUX(3, 6, 2)>, /* ET_RXDV */ + <RZA1_PINMUX(2, 0, 2)>, /* ET_TXCLK */ + <RZA1_PINMUX(2, 1, 2)>, /* ET_TXER */ + <RZA1_PINMUX(2, 2, 2)>, /* ET_TXEN */ + <RZA1_PINMUX(2, 3, 2)>, /* ET_CRS */ + <RZA1_PINMUX(2, 4, 2)>, /* ET_TXD0 */ + <RZA1_PINMUX(2, 5, 2)>, /* ET_TXD1 */ + <RZA1_PINMUX(2, 6, 2)>, /* ET_TXD2 */ + <RZA1_PINMUX(2, 7, 2)>, /* ET_TXD3 */ + <RZA1_PINMUX(2, 8, 2)>, /* ET_RXD0 */ + <RZA1_PINMUX(2, 9, 2)>, /* ET_RXD1 */ + <RZA1_PINMUX(2, 10, 2)>, /* ET_RXD2 */ + <RZA1_PINMUX(2, 11, 2)>; /* ET_RXD3 */ + }; }; &mtu2 { @@ -62,6 +85,8 @@ }; ðer { + pinctrl-names = "default"; + pinctrl-0 = <ðer_pins>; status = "okay"; renesas,no-ether-link; phy-handle = <&phy0>; -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html