Re: [PATCHv2 1/3] Input: edt_ft5x06: use devm_* functions where appropriate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jan 16, 2014 at 09:02:16AM +0100, Lothar Waßmann wrote:
> Simplify the error path and remove() function by using devm_*
> functions for requesting gpios and irq and allocating the input
> device.
> 
> Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>

Applied, thank you.

> ---
>  drivers/input/touchscreen/edt-ft5x06.c |   62 ++++++++++---------------------
>  1 files changed, 20 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index af0d68b..acb6b9f 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -623,8 +623,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
>  
>  	if (gpio_is_valid(reset_pin)) {
>  		/* this pulls reset down, enabling the low active reset */
> -		error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
> -					 "edt-ft5x06 reset");
> +		error = devm_gpio_request_one(&client->dev, reset_pin,
> +					GPIOF_OUT_INIT_LOW,
> +					"edt-ft5x06 reset");
>  		if (error) {
>  			dev_err(&client->dev,
>  				"Failed to request GPIO %d as reset pin, error %d\n",
> @@ -723,7 +724,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  		return error;
>  
>  	if (gpio_is_valid(pdata->irq_pin)) {
> -		error = gpio_request_one(pdata->irq_pin,
> +		error = devm_gpio_request_one(&client->dev, pdata->irq_pin,
>  					 GPIOF_IN, "edt-ft5x06 irq");
>  		if (error) {
>  			dev_err(&client->dev,
> @@ -734,11 +735,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	}
>  
>  	tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
> -	input = input_allocate_device();
> -	if (!tsdata || !input) {
> -		dev_err(&client->dev, "failed to allocate driver data.\n");
> -		error = -ENOMEM;
> -		goto err_free_mem;
> +	input = devm_input_allocate_device(&client->dev);
> +	if (!input) {
> +		dev_err(&client->dev, "failed to allocate input device.\n");
> +		return -ENOMEM;
>  	}
>  
>  	mutex_init(&tsdata->mutex);
> @@ -749,7 +749,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
>  	if (error) {
>  		dev_err(&client->dev, "touchscreen probe failed\n");
> -		goto err_free_mem;
> +		return error;
>  	}
>  
>  	edt_ft5x06_ts_get_defaults(tsdata, pdata);
> @@ -776,27 +776,30 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
>  	if (error) {
>  		dev_err(&client->dev, "Unable to init MT slots.\n");
> -		goto err_free_mem;
> +		return error;
>  	}
>  
>  	input_set_drvdata(input, tsdata);
>  	i2c_set_clientdata(client, tsdata);
>  
> -	error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
> -				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> -				     client->name, tsdata);
> +	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> +					edt_ft5x06_ts_isr,
> +					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +					client->name, tsdata);
>  	if (error) {
>  		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
> -		goto err_free_mem;
> +		return error;
>  	}
>  
>  	error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
>  	if (error)
> -		goto err_free_irq;
> +		return error;
>  
>  	error = input_register_device(input);
> -	if (error)
> -		goto err_remove_attrs;
> +	if (error) {
> +		sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
> +		return error;
> +	}
>  
>  	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
>  	device_init_wakeup(&client->dev, 1);
> @@ -806,40 +809,15 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  		pdata->irq_pin, pdata->reset_pin);
>  
>  	return 0;
> -
> -err_remove_attrs:
> -	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
> -err_free_irq:
> -	free_irq(client->irq, tsdata);
> -err_free_mem:
> -	input_free_device(input);
> -	kfree(tsdata);
> -
> -	if (gpio_is_valid(pdata->irq_pin))
> -		gpio_free(pdata->irq_pin);
> -
> -	return error;
>  }
>  
>  static int edt_ft5x06_ts_remove(struct i2c_client *client)
>  {
> -	const struct edt_ft5x06_platform_data *pdata =
> -						dev_get_platdata(&client->dev);
>  	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
>  
>  	edt_ft5x06_ts_teardown_debugfs(tsdata);
>  	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
>  
> -	free_irq(client->irq, tsdata);
> -	input_unregister_device(tsdata->input);
> -
> -	if (gpio_is_valid(pdata->irq_pin))
> -		gpio_free(pdata->irq_pin);
> -	if (gpio_is_valid(pdata->reset_pin))
> -		gpio_free(pdata->reset_pin);
> -
> -	kfree(tsdata);
> -
>  	return 0;
>  }
>  
> -- 
> 1.7.2.5
> 

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux