Now that the clocks are available in the R-Car Gen2 DT, add clocks property description to the sata_rcar bindings. The clocks have been tested on r8a7791 so we use that as an example of the R-Car SATA node. The patch is against for-next branch of the libata git repo. Signed-off-by: Valentine Barshak <valentine.barshak@xxxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/ata/sata_rcar.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt index 1e61113..6da60c0 100644 --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt @@ -7,12 +7,14 @@ Required properties: - "renesas,sata-r8a7791" for R-Car M2 - reg : address and length of the SATA registers; - interrupts : must consist of one interrupt specifier. +- clocks : must contain a phandle and clock-specifier pair. Example: -sata: sata@fc600000 { - compatible = "renesas,sata-r8a7779"; - reg = <0xfc600000 0x2000>; +sata0: sata@ee300000 { + compatible = "renesas,sata-r8a7791"; + reg = <0 0xee300000 0 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_SATA0>; }; -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html