Re: [PATCH v4 2/2] arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 07/19/2017 08:48 AM, YT Shen wrote:
On Tue, 2017-07-18 at 18:29 +0200, Matthias Brugger wrote:

On 06/22/2017 11:32 AM, YT Shen wrote:
This adds basic chip support for Mediatek 2712

[...]

+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+

[...]

+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		uart5: serial@1000f000 {
+			compatible = "mediatek,mt2712-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x1000f000 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};

So baud and bus clock are both 26 MHz?
We didn't have CCF clock support in this series.
After we have clock source support, we could use the correct clocks to
the UARTs and drop the 26MHz fixed rate UART clock.

The bus clock is 26MHz.  The baud clock could be from another clock
source, using the same 26MHz fixed clock works also.


[1] https://patchwork.kernel.org/patch/9670877/
[2] https://patchwork.kernel.org/patch/6436021/


Yes, just using one 26 MHz clock works, but it uses an deprecated binding, so we should not do this, as through copying from the source of other SoCs we will keep it alive forever. Anyway that's not your case, as you defined the two clocks.

The device tree should reflect the HW, that's why I asked for the clock frequency of both clocks. I searched the git history and it was never done right before. So you could be the first :)

Thanks,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux