On 07/18/2017 09:57 AM, Archit Taneja wrote:
>
> Hi,
>
> On 07/17/2017 01:10 PM, Philippe CORNU wrote:
>> Version 6:
>> - bridge/synopsys/dw-mipi-dsi.c: drm_bridge_add update (Archit Taneja)
>
> queued patches #1 to #4 to drm-misc-next. Please let me know when you apply
> the remainder of the ST patches. Once that's done, we can add
> CONFIG_DRM_STM_DSI=y
> in the drm-misc defconfigs for arm/arm64.
>
> Thanks,
> Archit
>
Hi Archit & Many thanks.
Benjamin integrated the last 3 patches + its last fix "drm: stm: remove
"default y" in Kconfig". So you should add CONFIG_DRM_STM=y too.
I take the opportunity to thank you for your great support, I learned so
much from you and from drm & kernel communities : )
*BIG THANK YOU* to all of you,
Philippe
>>
>> Version 5:
>> - bridge/synopsys/dw-mipi-dsi.c: Improve the direct call to panel
>> bridge post_disable() & related comments (Archit Taneja)
>> - stm/ltdc.c: fix leak of pixel clock enable in some error
>> paths (Eric Anholt)
>> - bindings/display/bridge/dw_mipi_dsi.txt: add pixel clock & remove
>> "driver" (Rob Herring, Archit Taneja)
>> - bindings/display/st,stm32-ltdc.txt: remove "driver" (Rob Herring,
>> Archit Taneja)
>>
>> Version 4:
>> - bridge/synopsys/dw-mipi-dsi.c: Add panel-bridge support (-45 lines,
>> but no so easy to do) and is_panel_bridge for a better clean up, add
>> stm copyright/remove dpms_mode/remove drm_of.h/improve clk
>> management/add mode_valid (thanks to comments of Archit Taneja), use
>> "DesignWare" instead of "Designware (thanks to comments of Neil
>> Armstrong)
>> - bridge/synopsys/Kconfig: Remove help section to hide it in menuconfig
>> (thanks to comments of Archit Taneja)
>> - include/drm/bridge/dw_mipi_dsi.h: Remove drmP.h (thanks to comments
>> of Archit Taneja)
>> - bindings/display/bridge/dw_mipi_dsi.txt: Improve optional property
>> explanations (thanks to comments of Neil Armstrong)
>> - stm/ltdc.c: Add is_panel_bridge for a better clean up/remove
>> drm_encoder_helper_add() (thanks to comments of Eric Anholt)
>> - stm/dw_mipi_dsi-stm.c: remove math64.h/use DRM_WARN/remove warnings
>> (thanks to comments of Archit Taneja), minor alignment fix (thanks to
>> comments of Neil Armstrong)
>> - bindings/display/st,stm32-ltdc.txt: use graph binding in the
>> example/improve ports usage doc (thanks to comments of Rob Herring),
>> use "DSI" instead of "dsi" where relevant (thanks to comments of Neil
>> Armstrong)
>>
>> Version 3:
>> - stm/ltdc: Use panel-bridge (-170 lines), thanks to comments of Eric
>> Anholt,
>> Boris Brezillon, Archit Taneja & Andrzej Hajda.
>> - Synopsys dsi: Add dw_mipi_dsi.h (forgotten in v2), thanks to
>> comments of
>> Neil Armstrong.
>> - Synopsys dsi/dw-mipi-dsi.c: add dw_mipi_dsi_dphy_init() &
>> dw_mipi_dsi_dphy_enable() to better manage DW phy-dedicated regs,
>> remove
>> dw_mipi_dsi_mode enum, remove stm32 patch for lpm, remove pllref
>> (manage in
>> the vendor phy) thanks to comments of Archit Taneja. Add mode_flags
>> to phy
>> parameters to better adjust lane mbps according to dsi burst and
>> non burst
>> modes todos in caps.
>> - stm/dw_mipi_dsi-stm.c: Add pllref management.
>> - dt-bindings/display/stm: Split dt-bindings patch in two (parent node
>> removal/ dsi), add required nodes (port & panel/bridge), updates
>> thanks to
>> comments of Rob Herring.
>> - dt-bindings/display/Synopsys dsi: remove port as part of the vendor
>> documentation, add panel/bridge node, update dt-bindings thanks to
>> comments
>> of Rob Herring.
>> - Add more people from Hisilicon & Rockchip.
>>
>> Version 2:
>> - Add a generic Synopsys DesignWare MIPI DSI bridge driver following
>> comments from Neil Armstrong & Archit Taneja.
>> - Use drm_of_find_panel_or_bridge() thanks to Eric Anholt comments
>> - Update dt-bindings thanks to Rob Herring comments
>>
>> Version 1:
>> - Initial commit
>>
>> The purpose of this set of patches is to add the mipi dsi host driver
>> to the stm32 family.
>>
>> This mipi dsi host driver is based on the Rockchip version of the
>> Synopsys Designware mipi dsi driver (rockchip/dw-mipi-dsi.c)
>> modified for the stm32 family:
>> - replace Rockchip digital & phy specific extensions with stm32's
>> ones.
>> - add a bridge
>>
>> Philippe CORNU (7):
>> drm/stm: ltdc: Fix leak of px clk enable in some error paths
>> drm/stm: ltdc: Add panel-bridge support
>> dt-bindings: display: Add Synopsys DW MIPI DSI host controller
>> drm/bridge/synopsys: Add MIPI DSI host controller bridge
>> dt-bindings: display: stm32: remove st-display-subsystem parent node
>> requirement
>> dt-bindings: display: stm32: Add DSI controller
>> drm/stm: Add STM32 DSI controller driver
>>
>> .../bindings/display/bridge/dw_mipi_dsi.txt | 32 +
>> .../devicetree/bindings/display/st,stm32-ltdc.txt | 105 ++-
>> drivers/gpu/drm/bridge/synopsys/Kconfig | 6 +
>> drivers/gpu/drm/bridge/synopsys/Makefile | 2 +
>> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 981
>> +++++++++++++++++++++
>> drivers/gpu/drm/stm/Kconfig | 9 +-
>> drivers/gpu/drm/stm/Makefile | 2 +
>> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 352 ++++++++
>> drivers/gpu/drm/stm/ltdc.c | 220 +----
>> drivers/gpu/drm/stm/ltdc.h | 3 +-
>> include/drm/bridge/dw_mipi_dsi.h | 39 +
>> 11 files changed, 1568 insertions(+), 183 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
>> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>>
> ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
