The "Continuous Voltage" example specifies a pwm-dutycycle-range. However, an equal sign is missing between the property name and value. Fix this to allow copy and paste from the documentation when writing an own .dts file with a pwm-regulator. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/regulator/pwm-regulator.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index bf85aa9ad6a7..3d78d507e29f 100644 --- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -71,7 +71,7 @@ Continuous Voltage With Enable GPIO Example: * Inverted PWM logic, and the duty cycle range is limited * to 30%-70%. */ - pwm-dutycycle-range <700 300>; /* */ + pwm-dutycycle-range = <700 300>; /* */ }; Voltage Table Example: -- 2.13.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html