This patch adds the I2C controller driver for Spreadtrum SC9860 platform.
Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
Changes since v3:
- Use SPDX-License-Identifier tag instead.
Changes since v2:
- Remove some redundant comments and parens.
- Define macros instead of magic number.
- Add some comments to explain clock formula.
- Change of_clk_get_by_name() to devm_clk_get().
- Deal with other frequency.
- Change register definiton to low case.
- Change is_last_msg to boolean.
- Other optimization.
Changes sice v1:
- Power on I2C device in probe().
- Remove redundant macros and usb __maybe_unused.
- Remove redundant 'of_match_ptr'.
- Modify return values and check the return value for 'clk_prepare_enable'.
---
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-sprd.c | 676 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 684 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-sprd.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 8adc0f1..86476b9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -877,6 +877,13 @@ config I2C_SIRF
This driver can also be built as a module. If so, the module
will be called i2c-sirf.
+config I2C_SPRD
+ bool "Spreadtrum I2C interface"
+ depends on ARCH_SPRD
+ help
+ If you say yes to this option, support will be included for the
+ Spreadtrum I2C interface.
+
config I2C_ST
tristate "STMicroelectronics SSC I2C support"
depends on ARCH_STI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 30b6085..dd46c21 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o
+obj-$(CONFIG_I2C_SPRD) += i2c-sprd.o
obj-$(CONFIG_I2C_ST) += i2c-st.o
obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
new file mode 100644
index 0000000..4193f4d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -0,0 +1,676 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define I2C_CTL 0x00
+#define I2C_ADDR_CFG 0x04
+#define I2C_COUNT 0x08
+#define I2C_RX 0x0c
+#define I2C_TX 0x10
+#define I2C_STATUS 0x14
+#define I2C_HSMODE_CFG 0x18
+#define I2C_VERSION 0x1c
+#define ADDR_DVD0 0x20
+#define ADDR_DVD1 0x24
+#define ADDR_STA0_DVD 0x28
+#define ADDR_RST 0x2c
+
+/* I2C_CTL */
+#define STP_EN BIT(20)
+#define FIFO_AF_LVL_MASK GENMASK(19, 16)
+#define FIFO_AF_LVL 16
+#define FIFO_AE_LVL_MASK GENMASK(15, 12)
+#define FIFO_AE_LVL 12
+#define I2C_DMA_EN BIT(11)
+#define FULL_INTEN BIT(10)
+#define EMPTY_INTEN BIT(9)
+#define I2C_DVD_OPT BIT(8)
+#define I2C_OUT_OPT BIT(7)
+#define I2C_TRIM_OPT BIT(6)
+#define I2C_HS_MODE BIT(4)
+#define I2C_MODE BIT(3)
+#define I2C_EN BIT(2)
+#define I2C_INT_EN BIT(1)
+#define I2C_START BIT(0)
+
+/* I2C_STATUS */
+#define SDA_IN BIT(21)
+#define SCL_IN BIT(20)
+#define FIFO_FULL BIT(4)
+#define FIFO_EMPTY BIT(3)
+#define I2C_INT BIT(2)
+#define I2C_RX_ACK BIT(1)
+#define I2C_BUSY BIT(0)
+
+/* ADDR_RST */
+#define I2C_RST BIT(0)
+
+#define I2C_FIFO_DEEP 12
+#define I2C_FIFO_FULL_THLD 15
+#define I2C_FIFO_EMPTY_THLD 4
+#define I2C_DATA_STEP 8
+#define I2C_ADDR_DVD0_CALC(high, low) \
+ ((((high) & GENMASK(15, 0)) << 16) | ((low) & GENMASK(15, 0)))
+#define I2C_ADDR_DVD1_CALC(high, low) \
+ (((high) & GENMASK(31, 16)) | (((low) & GENMASK(31, 16)) >> 16))
+
+/* timeout (ms) for pm runtime autosuspend */
+#define SPRD_I2C_PM_TIMEOUT 1000
+
+/* SPRD i2c data structure */
+struct sprd_i2c {
+ struct i2c_adapter adap;
+ struct device *dev;
+ void __iomem *base;
+ struct i2c_msg *msg;
+ struct clk *clk;
+ unsigned int src_clk;
+ unsigned int bus_freq;
+ struct completion complete;
+ u8 *buf;
+ u16 count;
+ int irq;
+ int err;
+};
+
+static void sprd_i2c_dump_reg(struct sprd_i2c *i2c_dev)
+{
+ dev_err(&i2c_dev->adap.dev, ": ======dump i2c-%d reg=======\n",
+ i2c_dev->adap.nr);
+ dev_err(&i2c_dev->adap.dev, ": I2C_CTRL:0x%x\n",
+ readl(i2c_dev->base + I2C_CTL));
+ dev_err(&i2c_dev->adap.dev, ": I2C_ADDR_CFG:0x%x\n",
+ readl(i2c_dev->base + I2C_ADDR_CFG));
+ dev_err(&i2c_dev->adap.dev, ": I2C_COUNT:0x%x\n",
+ readl(i2c_dev->base + I2C_COUNT));
+ dev_err(&i2c_dev->adap.dev, ": I2C_RX:0x%x\n",
+ readl(i2c_dev->base + I2C_RX));
+ dev_err(&i2c_dev->adap.dev, ": I2C_STATUS:0x%x\n",
+ readl(i2c_dev->base + I2C_STATUS));
+ dev_err(&i2c_dev->adap.dev, ": ADDR_DVD0:0x%x\n",
+ readl(i2c_dev->base + ADDR_DVD0));
+ dev_err(&i2c_dev->adap.dev, ": ADDR_DVD1:0x%x\n",
+ readl(i2c_dev->base + ADDR_DVD1));
+ dev_err(&i2c_dev->adap.dev, ": ADDR_STA0_DVD:0x%x\n",
+ readl(i2c_dev->base + ADDR_STA0_DVD));
+ dev_err(&i2c_dev->adap.dev, ": ADDR_RST:0x%x\n",
+ readl(i2c_dev->base + ADDR_RST));
+}
+
+static void sprd_i2c_set_count(struct sprd_i2c *i2c_dev, u32 count)
+{
+ writel(count, i2c_dev->base + I2C_COUNT);
+}
+
+static void sprd_i2c_send_stop(struct sprd_i2c *i2c_dev, int stop)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ if (stop)
+ writel(tmp & ~STP_EN, i2c_dev->base + I2C_CTL);
+ else
+ writel(tmp | STP_EN, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_clear_start(struct sprd_i2c *i2c_dev)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ writel(tmp & ~I2C_START, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_clear_ack(struct sprd_i2c *i2c_dev)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_STATUS);
+
+ writel(tmp & ~I2C_RX_ACK, i2c_dev->base + I2C_STATUS);
+}
+
+static void sprd_i2c_clear_irq(struct sprd_i2c *i2c_dev)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_STATUS);
+
+ writel(tmp & ~I2C_INT, i2c_dev->base + I2C_STATUS);
+}
+
+static void sprd_i2c_reset_fifo(struct sprd_i2c *i2c_dev)
+{
+ writel(I2C_RST, i2c_dev->base + ADDR_RST);
+}
+
+static void sprd_i2c_set_devaddr(struct sprd_i2c *i2c_dev, struct i2c_msg *m)
+{
+ writel(m->addr << 1, i2c_dev->base + I2C_ADDR_CFG);
+}
+
+static void sprd_i2c_write_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u32 len)
+{
+ u32 i;
+
+ for (i = 0; i < len; i++)
+ writeb(buf[i], i2c_dev->base + I2C_TX);
+}
+
+static void sprd_i2c_read_bytes(struct sprd_i2c *i2c_dev, u8 *buf, u16 len)
+{
+ u32 i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = readb(i2c_dev->base + I2C_RX);
+}
+
+static void sprd_i2c_set_full_thld(struct sprd_i2c *i2c_dev, u32 full_thld)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ tmp &= ~FIFO_AF_LVL_MASK;
+ tmp |= full_thld << FIFO_AF_LVL;
+ writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_empty_thld(struct sprd_i2c *i2c_dev, u32 empty_thld)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ tmp &= ~FIFO_AE_LVL_MASK;
+ tmp |= empty_thld << FIFO_AE_LVL;
+ writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_fifo_full_int(struct sprd_i2c *i2c_dev, int enable)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ if (enable)
+ tmp |= FULL_INTEN;
+ else
+ tmp &= ~FULL_INTEN;
+
+ writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_set_fifo_empty_int(struct sprd_i2c *i2c_dev, int enable)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ if (enable)
+ tmp |= EMPTY_INTEN;
+ else
+ tmp &= ~EMPTY_INTEN;
+
+ writel(tmp, i2c_dev->base + I2C_CTL);
+};
+
+static void sprd_i2c_opt_start(struct sprd_i2c *i2c_dev)
+{
+ unsigned int tmp = readl(i2c_dev->base + I2C_CTL);
+
+ writel(tmp | I2C_START, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_opt_mode(struct sprd_i2c *i2c_dev, int rw)
+{
+ unsigned int cmd = readl(i2c_dev->base + I2C_CTL) & ~I2C_MODE;
+
+ writel(cmd | rw << 3, i2c_dev->base + I2C_CTL);
+}
+
+static void sprd_i2c_data_transfer(struct sprd_i2c *i2c_dev)
+{
+ u32 i2c_count = i2c_dev->count;
+ u32 need_tran = i2c_count <= I2C_FIFO_DEEP ? i2c_count : I2C_FIFO_DEEP;
+ struct i2c_msg *msg = i2c_dev->msg;
+
+ if (msg->flags & I2C_M_RD) {
+ sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, I2C_FIFO_FULL_THLD);
+ i2c_dev->count -= I2C_FIFO_FULL_THLD;
+ i2c_dev->buf += I2C_FIFO_FULL_THLD;
+
+ /*
+ * If the read data count is larger than rx fifo full threshold,
+ * we should enable the rx fifo full interrupt to read data
+ * again.
+ */
+ if (i2c_dev->count >= I2C_FIFO_FULL_THLD)
+ sprd_i2c_set_fifo_full_int(i2c_dev, 1);
+ } else {
+ sprd_i2c_write_bytes(i2c_dev, i2c_dev->buf, need_tran);
+ i2c_dev->buf += need_tran;
+ i2c_dev->count -= need_tran;
+
+ /*
+ * If the write data count is arger than tx fifo depth which
+ * means we can not write all data in one time, then we should
+ * enable the tx fifo empty interrupt to write again.
+ */
+ if (i2c_count > I2C_FIFO_DEEP)
+ sprd_i2c_set_fifo_empty_int(i2c_dev, 1);
+ }
+}
+
+static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msg, bool is_last_msg)
+{
+ struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
+
+ i2c_dev->msg = msg;
+ i2c_dev->buf = msg->buf;
+ i2c_dev->count = msg->len;
+
+ reinit_completion(&i2c_dev->complete);
+ sprd_i2c_reset_fifo(i2c_dev);
+ sprd_i2c_set_devaddr(i2c_dev, msg);
+ sprd_i2c_set_count(i2c_dev, msg->len);
+
+ if ((msg->flags & I2C_M_RD)) {
+ sprd_i2c_opt_mode(i2c_dev, 1);
+ sprd_i2c_send_stop(i2c_dev, 1);
+ } else {
+ sprd_i2c_opt_mode(i2c_dev, 0);
+ sprd_i2c_send_stop(i2c_dev, !!is_last_msg);
+ }
+
+ /*
+ * We should enable rx fifo full interrupt to get data when receiving
+ * full data.
+ */
+ if ((msg->flags & I2C_M_RD))
+ sprd_i2c_set_fifo_full_int(i2c_dev, 1);
+ else
+ sprd_i2c_data_transfer(i2c_dev);
+
+ sprd_i2c_opt_start(i2c_dev);
+
+ wait_for_completion(&i2c_dev->complete);
+
+ return i2c_dev->err;
+}
+
+static int sprd_i2c_master_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
+ int im, ret;
+
+ ret = pm_runtime_get_sync(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ for (im = 0; im < num - 1; im++) {
+ ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im], 0);
+ if (ret)
+ goto err_msg;
+ }
+
+ ret = sprd_i2c_handle_msg(i2c_adap, &msgs[im++], 1);
+
+err_msg:
+ pm_runtime_mark_last_busy(i2c_dev->dev);
+ pm_runtime_put_autosuspend(i2c_dev->dev);
+
+ return ret < 0 ? ret : im;
+}
+
+static u32 sprd_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm sprd_i2c_algo = {
+ .master_xfer = sprd_i2c_master_xfer,
+ .functionality = sprd_i2c_func,
+};
+
+static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, unsigned int freq)
+{
+ u32 apb_clk = i2c_dev->src_clk;
+ /*
+ * From I2C databook, the prescale calculation formula:
+ * prescale = freq_i2c / (4 * freq_scl) - 1;
+ */
+ u32 i2c_dvd = apb_clk / (4 * freq) - 1;
+ /*
+ * From I2C databook, the high period of SCL clock is recommended as
+ * 40% (2/5), and the low period of SCL clock is recommended as 60%
+ * (3/5), then the formula should be:
+ * high = (prescale * 2 * 2) / 5
+ * low = (prescale * 2 * 3) / 5
+ */
+ u32 high = ((i2c_dvd << 1) * 2) / 5;
+ u32 low = ((i2c_dvd << 1) * 3) / 5;
+ u32 div0 = I2C_ADDR_DVD0_CALC(high, low);
+ u32 div1 = I2C_ADDR_DVD1_CALC(high, low);
+
+ writel(div0, i2c_dev->base + ADDR_DVD0);
+ writel(div1, i2c_dev->base + ADDR_DVD1);
+
+ /* Start hold timing = hold time(us) * source clock */
+ if (freq == 400000)
+ writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD);
+ else if (freq == 100000)
+ writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD);
+}
+
+static void sprd_i2c_enable(struct sprd_i2c *i2c_dev)
+{
+ unsigned int tmp = I2C_DVD_OPT;
+
+ writel(tmp, i2c_dev->base + I2C_CTL);
+
+ sprd_i2c_set_full_thld(i2c_dev, I2C_FIFO_FULL_THLD);
+ sprd_i2c_set_empty_thld(i2c_dev, I2C_FIFO_EMPTY_THLD);
+
+ sprd_i2c_set_clk(i2c_dev, i2c_dev->bus_freq);
+ sprd_i2c_reset_fifo(i2c_dev);
+ sprd_i2c_clear_irq(i2c_dev);
+
+ tmp = readl(i2c_dev->base + I2C_CTL);
+ writel(tmp | I2C_EN | I2C_INT_EN, i2c_dev->base + I2C_CTL);
+}
+
+static irqreturn_t sprd_i2c_isr_thread(int irq, void *dev_id)
+{
+ struct sprd_i2c *i2c_dev = dev_id;
+ struct i2c_msg *msg = i2c_dev->msg;
+ int ack = readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK;
+ u32 i2c_count = readl(i2c_dev->base + I2C_COUNT);
+ u32 i2c_tran;
+
+ if (msg->flags & I2C_M_RD)
+ i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
+ else
+ i2c_tran = i2c_count;
+
+ /*
+ * If we got one ACK from slave when writing data, and we did not
+ * finish this transmission (i2c_tran is not zero), then we should
+ * continue to write data.
+ *
+ * For reading data, ack is always 0, if i2c_tran is not 0 which
+ * means we still need to contine to read data from slave.
+ */
+ if (i2c_tran && !ack) {
+ sprd_i2c_data_transfer(i2c_dev);
+ return IRQ_HANDLED;
+ }
+
+ i2c_dev->err = 0;
+
+ /*
+ * If we did not get one ACK from slave when writing data, we should
+ * dump all registers to check I2C status.
+ */
+ if (ack) {
+ i2c_dev->err = -EIO;
+ sprd_i2c_dump_reg(i2c_dev);
+ } else if (msg->flags & I2C_M_RD && i2c_dev->count) {
+ sprd_i2c_read_bytes(i2c_dev, i2c_dev->buf, i2c_dev->count);
+ }
+
+ /* Transmission is done and clear ack and start operation */
+ sprd_i2c_clear_ack(i2c_dev);
+ sprd_i2c_clear_start(i2c_dev);
+ complete(&i2c_dev->complete);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sprd_i2c_isr(int irq, void *dev_id)
+{
+ struct sprd_i2c *i2c_dev = dev_id;
+ struct i2c_msg *msg = i2c_dev->msg;
+ u32 i2c_count = readl(i2c_dev->base + I2C_COUNT);
+ int ack = readl(i2c_dev->base + I2C_STATUS) & I2C_RX_ACK;
+ u32 i2c_tran;
+
+ if (msg->flags & I2C_M_RD)
+ i2c_tran = i2c_dev->count >= I2C_FIFO_FULL_THLD;
+ else
+ i2c_tran = i2c_count;
+
+ /*
+ * If ack == 0 means we got one ACK, if ack != 0 means we did not
+ * get one ACK from slave when writing data, then we should finish
+ * this transmission since we got some errors.
+ *
+ * When writing data, if i2c_tran == 0 which means we have writen
+ * done all data, then we can finish this transmission.
+ *
+ * When reading data, if conut < rx fifo full threshold, which
+ * means we can read all data in one time, then we can finish this
+ * transmission too.
+ */
+ if (!i2c_tran || ack) {
+ sprd_i2c_clear_start(i2c_dev);
+ sprd_i2c_clear_irq(i2c_dev);
+ }
+
+ sprd_i2c_set_fifo_empty_int(i2c_dev, 0);
+ sprd_i2c_set_fifo_full_int(i2c_dev, 0);
+
+ return IRQ_WAKE_THREAD;
+}
+
+static int sprd_i2c_clk_init(struct sprd_i2c *i2c_dev)
+{
+ struct clk *clk_i2c, *clk_parent;
+
+ clk_i2c = devm_clk_get(i2c_dev->dev, "i2c");
+ if (IS_ERR(clk_i2c)) {
+ dev_warn(i2c_dev->dev, "i2c%d can't get the i2c clock\n",
+ i2c_dev->adap.nr);
+ clk_i2c = NULL;
+ }
+
+ clk_parent = devm_clk_get(i2c_dev->dev, "source");
+ if (IS_ERR(clk_parent)) {
+ dev_warn(i2c_dev->dev, "i2c%d can't get the source clock\n",
+ i2c_dev->adap.nr);
+ clk_parent = NULL;
+ }
+
+ if (clk_set_parent(clk_i2c, clk_parent))
+ i2c_dev->src_clk = clk_get_rate(clk_i2c);
+ else
+ i2c_dev->src_clk = 26000000;
+
+ dev_dbg(i2c_dev->dev, "i2c%d set source clock is %d\n",
+ i2c_dev->adap.nr, i2c_dev->src_clk);
+
+ i2c_dev->clk = devm_clk_get(i2c_dev->dev, "enable");
+ if (IS_ERR(i2c_dev->clk)) {
+ dev_warn(i2c_dev->dev, "i2c%d can't get the enable clock\n",
+ i2c_dev->adap.nr);
+ i2c_dev->clk = NULL;
+ }
+
+ return 0;
+}
+
+static int sprd_i2c_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sprd_i2c *i2c_dev;
+ struct resource *res;
+ u32 prop;
+ int ret;
+
+ pdev->id = of_alias_get_id(dev->of_node, "i2c");
+
+ i2c_dev = devm_kzalloc(dev, sizeof(struct sprd_i2c), GFP_KERNEL);
+ if (!i2c_dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c_dev->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+
+ i2c_dev->irq = platform_get_irq(pdev, 0);
+ if (i2c_dev->irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq resource\n");
+ return i2c_dev->irq;
+ }
+
+ i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
+ init_completion(&i2c_dev->complete);
+ snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
+ "%s", "sprd-i2c");
+
+ i2c_dev->bus_freq = 100000;
+ i2c_dev->adap.owner = THIS_MODULE;
+ i2c_dev->dev = dev;
+ i2c_dev->adap.retries = 3;
+ i2c_dev->adap.algo = &sprd_i2c_algo;
+ i2c_dev->adap.algo_data = i2c_dev;
+ i2c_dev->adap.dev.parent = dev;
+ i2c_dev->adap.nr = pdev->id;
+ i2c_dev->adap.dev.of_node = dev->of_node;
+
+ if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop))
+ i2c_dev->bus_freq = prop;
+
+ /* We only support 100k and 400k now, otherwise will return error. */
+ if (i2c_dev->bus_freq != 100000 && i2c_dev->bus_freq != 400000)
+ return -EINVAL;
+
+ sprd_i2c_clk_init(i2c_dev);
+ platform_set_drvdata(pdev, i2c_dev);
+
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret)
+ return ret;
+
+ sprd_i2c_enable(i2c_dev);
+
+ pm_runtime_set_autosuspend_delay(i2c_dev->dev, SPRD_I2C_PM_TIMEOUT);
+ pm_runtime_use_autosuspend(i2c_dev->dev);
+ pm_runtime_set_active(i2c_dev->dev);
+ pm_runtime_enable(i2c_dev->dev);
+
+ ret = pm_runtime_get_sync(i2c_dev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "i2c%d pm runtime resume failed!\n",
+ pdev->id);
+ goto err_rpm_put;
+ }
+
+ ret = devm_request_threaded_irq(dev, i2c_dev->irq,
+ sprd_i2c_isr, sprd_i2c_isr_thread,
+ IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ pdev->name, i2c_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request irq %d\n", i2c_dev->irq);
+ goto err_rpm_put;
+ }
+
+ ret = i2c_add_numbered_adapter(&i2c_dev->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "add adapter failed\n");
+ goto err_rpm_put;
+ }
+
+ pm_runtime_mark_last_busy(i2c_dev->dev);
+ pm_runtime_put_autosuspend(i2c_dev->dev);
+ return 0;
+
+err_rpm_put:
+ pm_runtime_put_noidle(i2c_dev->dev);
+ pm_runtime_disable(i2c_dev->dev);
+ clk_disable_unprepare(i2c_dev->clk);
+ return ret;
+}
+
+static int sprd_i2c_remove(struct platform_device *pdev)
+{
+ struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pm_runtime_get_sync(i2c_dev->dev);
+ if (ret < 0)
+ return ret;
+
+ i2c_del_adapter(&i2c_dev->adap);
+ clk_disable_unprepare(i2c_dev->clk);
+
+ pm_runtime_put_noidle(i2c_dev->dev);
+ pm_runtime_disable(i2c_dev->dev);
+
+ return 0;
+}
+
+static int __maybe_unused sprd_i2c_suspend_noirq(struct device *pdev)
+{
+ return pm_runtime_force_suspend(pdev);
+}
+
+static int __maybe_unused sprd_i2c_resume_noirq(struct device *pdev)
+{
+ return pm_runtime_force_resume(pdev);
+}
+
+static int __maybe_unused sprd_i2c_runtime_suspend(struct device *pdev)
+{
+ struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+
+ clk_disable_unprepare(i2c_dev->clk);
+
+ return 0;
+}
+
+static int __maybe_unused sprd_i2c_runtime_resume(struct device *pdev)
+{
+ struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret)
+ return ret;
+
+ sprd_i2c_enable(i2c_dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops sprd_i2c_pm_ops = {
+ SET_RUNTIME_PM_OPS(sprd_i2c_runtime_suspend,
+ sprd_i2c_runtime_resume, NULL)
+
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(sprd_i2c_suspend_noirq,
+ sprd_i2c_resume_noirq)
+};
+
+static const struct of_device_id sprd_i2c_of_match[] = {
+ { .compatible = "sprd,sc9860-i2c", },
+};
+
+static struct platform_driver sprd_i2c_driver = {
+ .probe = sprd_i2c_probe,
+ .remove = sprd_i2c_remove,
+ .driver = {
+ .name = "sprd-i2c",
+ .of_match_table = sprd_i2c_of_match,
+ .pm = &sprd_i2c_pm_ops,
+ },
+};
+
+static int sprd_i2c_init(void)
+{
+ return platform_driver_register(&sprd_i2c_driver);
+}
+arch_initcall_sync(sprd_i2c_init);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
