On 07/12/2017 02:12 AM, Ladislav Michl wrote:
> On Tue, Jul 11, 2017 at 10:59:11PM +0200, Ladislav Michl wrote:
>> On Tue, Jul 11, 2017 at 07:07:32PM +0300, Dragos Bogdan wrote:
>>> The only difference between the already supported LTC2943 and LTC2944 is the operating range (3.6V - 20V compared to 3.6V - 60V).
>> Please wrap commit message correctly.
>>
>>> Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
>>> ---
>>> Changes in v2:
>>> - Fix the voltage and current conversion.
>> That's better :-) However it conflicts with LTC2942 patch. I can fix
> Well, still not good enough. You overlooked different temperature
> computing formula. For a bug, see bellow.
The Full-Scale Temperature is 510 K (as it is displayed in the Electrical
Characteristics section) for both LTC2943 and LTC2944 parts, so the same
computing formula is valid.
For LTC2944, the 500 K value used in the Applications Information section
is an error that will be fixed in the next version of the datasheet.
>
>> this and extend LTC2942 patch serie to add LTC2944. Okay to proceed
>> or do you want to take care about this yourself? Also it is nice to
> I'll provide patchset myself, it is mostly done now. I'd appreciate
> if you could test it on your device.
>
>> Cc driver author (done now).
>>
>> ladis
>>
>>> .../devicetree/bindings/power/supply/ltc2941.txt | 10 ++---
>>> drivers/power/supply/ltc2941-battery-gauge.c | 46 +++++++++++++++++-----
>>> 2 files changed, 41 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
>>> index a9d7aa60558b..ed0f02846d10 100644
>>> --- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt
>>> +++ b/Documentation/devicetree/bindings/power/supply/ltc2941.txt
>>> @@ -1,9 +1,9 @@
>>> -binding for LTC2941 and LTC2943 battery gauges
>>> +binding for LTC2941, LTC2943 and LTC2944 battery gauges
>>>
>>> -Both the LTC2941 and LTC2943 measure battery capacity.
>>> -The LTC2943 is compatible with the LTC2941, it adds voltage and
>>> -temperature monitoring, and uses a slightly different conversion
>>> -formula for the charge counter.
>>> +All the LTC2941, LTC2943 and LTC2944 measure battery capacity.
>>> +The LTC2943 and LTC2944 are compatible with the LTC2941, they add voltage and
>>> +temperature monitoring, and use a slightly different conversion formula for the
>>> +charge counter.
>>>
>>> Required properties:
>>> - compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
>>> diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
>>> index 7efb908f4451..4c979b1a022b 100644
>>> --- a/drivers/power/supply/ltc2941-battery-gauge.c
>>> +++ b/drivers/power/supply/ltc2941-battery-gauge.c
>>> @@ -1,5 +1,5 @@
>>> /*
>>> - * I2C client/driver for the Linear Technology LTC2941 and LTC2943
>>> + * I2C client/driver for the Linear Technology LTC2941, LTC2943 and LTC2944
>>> * Battery Gas Gauge IC
>>> *
>>> * Copyright (C) 2014 Topic Embedded Systems
>>> @@ -57,6 +57,12 @@ enum ltc294x_reg {
>>> #define LTC2941_NUM_REGS 0x08
>>> #define LTC2943_NUM_REGS 0x18
>>>
>>> +enum ltc294x_id {
>>> + LTC2941_ID,
>>> + LTC2943_ID,
>>> + LTC2944_ID,
>>> +};
>>> +
>>> struct ltc294x_info {
>>> struct i2c_client *client; /* I2C Client pointer */
>>> struct power_supply *supply; /* Supply pointer */
>>> @@ -66,6 +72,7 @@ struct ltc294x_info {
>>> int charge; /* Last charge register content */
>>> int r_sense; /* mOhm */
>>> int Qlsb; /* nAh */
>>> + enum ltc294x_id id;
>>> };
>>>
>>> static inline int convert_bin_to_uAh(
>>> @@ -145,7 +152,7 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
>>>
>>> control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
>>> LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
>>> - /* Put the 2943 into "monitor" mode, so it measures every 10 sec */
>>> + /* Put the 2943/4 into "monitor" mode, so it measures every 10 sec */
>>> if (info->num_regs == LTC2943_NUM_REGS)
>>> control |= LTC2943_REG_CONTROL_MODE_SCAN;
>>>
>>> @@ -248,11 +255,16 @@ static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
>>> int ret;
>>> u8 datar[2];
>>> u32 value;
>>> + u32 full_scale;
>>>
>>> ret = ltc294x_read_regs(info->client,
>>> LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
>>> value = (datar[0] << 8) | datar[1];
>>> - *val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
>>> + if (info->id == LTC2944_ID)
>>> + full_scale = 70800;
>>> + else
>>> + full_scale = 23600;
>>> + *val = ((value * full_scale) / 0xFFFF) * 1000; /* in uV */
> Here result of 14bit ADC conversion is stored in 16bit register with
> lowest two bits being zero. Multiplying that with 70800 will overflow
> 32bit unsigned integer.
>
>>> return ret;
>>> }
>>>
>>> @@ -261,15 +273,20 @@ static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
>>> int ret;
>>> u8 datar[2];
>>> s32 value;
>>> + u32 full_scale;
>>>
>>> ret = ltc294x_read_regs(info->client,
>>> LTC294X_REG_CURRENT_MSB, &datar[0], 2);
>>> value = (datar[0] << 8) | datar[1];
>>> value -= 0x7FFF;
>>> + if (info->id == LTC2944_ID)
>>> + full_scale = 64000;
>>> + else
>>> + full_scale = 60000;
>>> /* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
>>> * the formula below keeps everything in s32 range while preserving
>>> * enough digits */
>>> - *val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
>>> + *val = 1000 * ((full_scale * value) / (info->r_sense * 0x7FFF)); /* in uA */
>>> return ret;
>>> }
>>>
>>> @@ -388,7 +405,11 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
>>>
>>> np = of_node_get(client->dev.of_node);
>>>
>>> - info->num_regs = (unsigned long)of_device_get_match_data(&client->dev);
>>> + info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
>>> + if (info->id == LTC2941_ID)
>>> + info->num_regs = LTC2941_NUM_REGS;
>>> + else
>>> + info->num_regs = LTC2943_NUM_REGS;
>>> info->supply_desc.name = np->name;
>>>
>>> /* r_sense can be negative, when sense+ is connected to the battery
>>> @@ -492,8 +513,9 @@ static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
>>>
>>>
>>> static const struct i2c_device_id ltc294x_i2c_id[] = {
>>> - {"ltc2941", LTC2941_NUM_REGS},
>>> - {"ltc2943", LTC2943_NUM_REGS},
>>> + {"ltc2941", LTC2941_ID},
>>> + {"ltc2943", LTC2943_ID},
>>> + {"ltc2944", LTC2944_ID},
>>> { },
>>> };
>>> MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
>>> @@ -501,11 +523,15 @@ MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
>>> static const struct of_device_id ltc294x_i2c_of_match[] = {
>>> {
>>> .compatible = "lltc,ltc2941",
>>> - .data = (void *)LTC2941_NUM_REGS
>>> + .data = (void *)LTC2941_ID
>>> },
>>> {
>>> .compatible = "lltc,ltc2943",
>>> - .data = (void *)LTC2943_NUM_REGS
>>> + .data = (void *)LTC2943_ID
>>> + },
>>> + {
>>> + .compatible = "lltc,ltc2944",
>>> + .data = (void *)LTC2944_ID
>>> },
>>> { },
>>> };
>>> @@ -525,5 +551,5 @@ module_i2c_driver(ltc294x_driver);
>>>
>>> MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
>>> MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
>>> -MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
>>> +MODULE_DESCRIPTION("LTC2941/LTC2943/LTC2944 Battery Gas Gauge IC driver");
>>> MODULE_LICENSE("GPL");
>>> --
>>> 2.11.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
