The display-timing and delay are included in the panel driver. So it
should be removed in dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 443e0c9..6b70c8d 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -242,28 +242,6 @@
vci-supply = <&ldo20_reg>;
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
- power-on-delay= <30>;
- power-off-delay= <120>;
- reset-delay = <5>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <29>;
- panel-height-mm = <29>;
-
- display-timings {
- timing-0 {
- clock-frequency = <4600000>;
- hactive = <320>;
- vactive = <320>;
- hfront-porch = <1>;
- hback-porch = <1>;
- hsync-len = <1>;
- vfront-porch = <150>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
port {
dsi_in: endpoint {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
