On 12.07.2017 15:25, Andrzej Hajda wrote:
> On 27.06.2017 04:11, Hoegeun Kwon wrote:
>> This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
>> which uses mipi_dsi bus to communicate with panel. The panel has
>> 320×320 resolution in 1.63" physical panel. This panel is used in
>> Samsung Galaxy Gear 2.
>>
>> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
>> Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/panel/Kconfig | 7 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 540 +++++++++++++++++++++++
>> 3 files changed, 548 insertions(+)
>> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 3e29a99..3f4afde 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -68,6 +68,13 @@ config DRM_PANEL_SAMSUNG_S6E3HA2
>> depends on DRM_MIPI_DSI
>> select VIDEOMODE_HELPERS
>>
>> +config DRM_PANEL_SAMSUNG_S6E63J0X03
>> + tristate "Samsung S6E63J0X03 DSI command mode panel"
>> + depends on OF
>> + depends on DRM_MIPI_DSI
>> + depends on BACKLIGHT_CLASS_DEVICE
>> + select VIDEOMODE_HELPERS
>> +
>> config DRM_PANEL_SAMSUNG_S6E8AA0
>> tristate "Samsung S6E8AA0 DSI video mode panel"
>> depends on OF
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 292b3c7..f028269 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
>> obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
>> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
>> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
>> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
>> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
>> new file mode 100644
>> index 0000000..c3d1b5d
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
>> @@ -0,0 +1,540 @@
>> +/*
>> + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver.
>> + *
>> + * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd
>> + *
>> + * Inki Dae <inki.dae@xxxxxxxxxxx>
>> + * Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_panel.h>
>> +#include <linux/backlight.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define MCS_LEVEL2_KEY 0xf0
>> +#define MCS_MTP_KEY 0xf1
>> +#define MCS_MTP_SET3 0xd4
>> +
>> +#define MAX_BRIGHTNESS 100
>> +#define DEFAULT_BRIGHTNESS 80
>> +
>> +#define NUM_GAMMA_STEPS 9
>> +#define GAMMA_CMD_CNT 28
>> +
>> +#define FIRST_COLUMN 20
>> +
>> +struct s6e63j0x03 {
>> + struct device *dev;
>> + struct drm_panel panel;
>> + struct backlight_device *bl_dev;
>> +
>> + struct regulator_bulk_data supplies[2];
>> + struct gpio_desc *reset_gpio;
>> +};
>> +
>> +static const struct drm_display_mode default_mode = {
>> + .clock = 4649,
>> + .hdisplay = 320,
>> + .hsync_start = 320 + 1,
>> + .hsync_end = 320 + 1 + 1,
>> + .htotal = 320 + 1 + 1 + 1,
>> + .vdisplay = 320,
>> + .vsync_start = 320 + 150,
>> + .vsync_end = 320 + 150 + 1,
>> + .vtotal = 320 + 150 + 1 + 2,
>> + .vrefresh = 30,
>> + .flags = 0,
>> +};
>> +
>> +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = {
>> + { /* Gamma 10 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26,
>> + 0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36,
>> + 0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf
>> + },
>> + { /* gamma 30 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26,
>> + 0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34,
>> + 0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc
>> + },
>> + { /* gamma 60 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a,
>> + 0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33,
>> + 0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5
>> + },
>> + { /* gamma 90 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29,
>> + 0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31,
>> + 0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09
>> + },
>> + { /* gamma 120 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28,
>> + 0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31,
>> + 0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b
>> + },
>> + { /* gamma 150 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28,
>> + 0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31,
>> + 0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29
>> + },
>> + { /* gamma 200 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29,
>> + 0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30,
>> + 0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b
>> + },
>> + { /* gamma 240 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a,
>> + 0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30,
>> + 0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47
>> + },
>> + { /* gamma 300 */
>> + MCS_MTP_SET3,
>> + 0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28,
>> + 0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f,
>> + 0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57
>> + }
>> +};
>> +
>> +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel)
>> +{
>> + return container_of(panel, struct s6e63j0x03, panel);
>> +}
>> +
>> +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx,
>> + const void *seq, size_t len)
>> +{
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +
>> + return mipi_dsi_dcs_write_buffer(dsi, seq, len);
>> +}
>> +
>> +#define s6e63j0x03_dcs_write_seq_static(ret, ctx, seq...) \
>> + do { \
>> + static const u8 d[] = { seq }; \
>> + ret = s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \
>> + } while (0)
> I think better would be to use statement expression here [1]:
> #define s6e63j0x03_dcs_write_seq_static(ctx, seq...) \
> ({ \
> static const u8 d[] = { seq }; \
> s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d)); \
> })
>
> This way instead of passing ret by reference you can use return value.
>
> [1]: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html
>
>> +
>> +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx)
>> +{
>> + int ret;
>> +
>> + s6e63j0x03_dcs_write_seq_static(ret, ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a);
>> + return ret;
>> +}
> With the construct above this function can be simplified to:
>
> +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx)
> +{
> + s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a);
Ups, should be:
return s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a);
Regards
Andrzej
> +}
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
