Re: [PATCH v2 1/7] pwm: rockchip: Add APB and function both clocks support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Doug,

在 2017/7/12 1:03, Doug Anderson 写道:
Hi,

On Fri, Jul 7, 2017 at 9:03 PM, David Wu <david.wu@xxxxxxxxxxxxxx> wrote:

@@ -6,7 +6,13 @@ Required properties:
     "rockchip,rk3288-pwm": found on RK3288 SoC
     "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
   - reg: physical base address and length of the controller's registers
- - clocks: phandle and clock specifier of the PWM reference clock
+ - clocks: See ../clock/clock-bindings.txt
+   - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399):
+     - There is one clock that's used both to derive the functional clock
+       for the device and as the bus clock.
+   - For newer hardware (rk3328 and future socs): specified by name
+     - "pwm": This is used to derive the functional clock.
+     - "pclk": This is the APB bus clock.

I'm pretty sure that that the above description doesn't quite match the code.

* The above description says that for old hardware there is one clock
and 'clock-names' was not necessary (though as I understand it it's OK
if it's there).

* The old code matched the old description.  AKA: if there was no
"clock-names" then everything was OK.

* The new code will not work if there was no "clock-names".

Many of the old devices had a clock-names present (and it was "pwm"),
but not all.  Specifically it looks like
"arch/arm/boot/dts/rk3xxx.dtsi" doesn't specify a clock-names.


So we can keep code: the pc->clk = devm_clk_get(&pdev->dev, NULL);
If the name is NULL, we can get the first clk defined at DTB.

@@ -343,13 +344,38 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
         if (IS_ERR(pc->base))
                 return PTR_ERR(pc->base);

-       pc->clk = devm_clk_get(&pdev->dev, NULL);
-       if (IS_ERR(pc->clk))
-               return PTR_ERR(pc->clk);
+       pc->clk = devm_clk_get(&pdev->dev, "pwm");
+       count = of_property_count_strings(pdev->dev.of_node, "clock-names");
+       if (count == 2)
+               pc->pclk = devm_clk_get(&pdev->dev, "pclk");
+       else
+               pc->pclk = pc->clk;
+
+       if (IS_ERR(pc->clk)) {
+               ret = PTR_ERR(pc->clk);
+               if (ret != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret);
+               return ret;
+       }
+
+       if (IS_ERR(pc->pclk)) {
+               ret = PTR_ERR(pc->pclk);
+               if (ret != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "Can't get APB clk: %d\n", ret);
+               return ret;
+       }

In the above code you need to check the count _before_ trying to get
the clock by name.

Okay, I will fix it.



-Doug




--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux