The watchdog IP block on Meson8 and Meson8m2 is already supported by the existing meson-wdt driver. Meson8 uses the same register bits as Meson6, while the newer Meson8m2 SoC uses the same register bits as Meson8b. Currently watchdog support on Meson8 SoC already works because meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a separate compatible for Meson8 makes this more explicit though. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Changes since v1 at [0]: - updated the documentation to indicate that Meson8 should also specify the Meson6 compatible and that Meson8m2 should also specify the Meson8b compatible [0] https://patchwork.kernel.org/patch/9780093/ Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 6 +++++- drivers/watchdog/meson_wdt.c | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt index ae70185d96e6..8a6d84cb36c9 100644 --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt @@ -2,7 +2,11 @@ Meson SoCs Watchdog timer Required properties: -- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt" +- compatible : depending on the SoC this should be one of: + "amlogic,meson6-wdt" on Meson6 SoCs + "amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs + "amlogic,meson8b-wdt" on Meson8b SoCs + "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs - reg : Specifies base physical address and size of the registers. Example: diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c index 491b9bf13d84..304274c67735 100644 --- a/drivers/watchdog/meson_wdt.c +++ b/drivers/watchdog/meson_wdt.c @@ -155,7 +155,9 @@ static const struct watchdog_ops meson_wdt_ops = { static const struct of_device_id meson_wdt_dt_ids[] = { { .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data }, + { .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data }, { .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data }, + { .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids); -- 2.13.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
