Hi Kishon,
Thank you for the feedback.
I will address all your comments in the next patch set.
Regards,
Srinath.
On Tue, Jul 11, 2017 at 12:01 PM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
> hi,
>
> On Friday 07 July 2017 06:37 PM, Srinath Mannam wrote:
>> USB phy driver for stingray USB DRDU3 and DRDU2/USB3H
>> phy modules
>>
>> Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
>> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
>> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>> ---
>> drivers/phy/broadcom/Kconfig | 13 +
>> drivers/phy/broadcom/Makefile | 1 +
>> drivers/phy/broadcom/phy-bcm-stingray-usb.c | 722 ++++++++++++++++++++++++++++
>> 3 files changed, 736 insertions(+)
>> create mode 100644 drivers/phy/broadcom/phy-bcm-stingray-usb.c
>>
>> diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
>> index 37371b8..185a84b 100644
>> --- a/drivers/phy/broadcom/Kconfig
>> +++ b/drivers/phy/broadcom/Kconfig
>> @@ -58,6 +58,19 @@ config PHY_NS2_USB_DRD
>>
>> If unsure, say N.
>>
>> +config PHY_STINGRAY_USB
>> + tristate "Broadcom Stingray USB2 DRD PHY driver"
>> + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
>> + select GENERIC_PHY
>> + default ARCH_BCM_IPROC
>> + help
>> + Enable this to support the Broadcom Stingray USB PHY for DRDU3,
>> + DRDU2 and USB3H.
>> + This driver initializes the PHY which can be used in both
>> + Host and Device modes.
>> +
>> + If unsure, say N.
>> +
>> config PHY_BRCM_SATA
>> tristate "Broadcom SATA PHY driver"
>> depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
>> diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
>> index 4eb82ec..78c1033 100644
>> --- a/drivers/phy/broadcom/Makefile
>> +++ b/drivers/phy/broadcom/Makefile
>> @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
>> obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
>> obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
>> obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o
>> +obj-$(CONFIG_PHY_STINGRAY_USB) += phy-bcm-stingray-usb.o
>> obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
>> diff --git a/drivers/phy/broadcom/phy-bcm-stingray-usb.c b/drivers/phy/broadcom/phy-bcm-stingray-usb.c
>> new file mode 100644
>> index 0000000..03603fd
>> --- /dev/null
>> +++ b/drivers/phy/broadcom/phy-bcm-stingray-usb.c
>> @@ -0,0 +1,722 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation version 2.
>> + *
>> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
>> + * kind, whether express or implied; without even the implied warranty
>> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define DRDU2_U2PLL_NDIV_FRAC 0x0
>> +
>> +#define DRDU2_U2PLL_NDIV_INT 0x4
>> +
>> +#define DRDU2_U2PLL_CTRL 0x8
>> +#define DRDU2_U2PLL_LOCK BIT(6)
>> +#define DRDU2_U2PLL_RESETB BIT(5)
>> +#define DRDU2_U2PLL_PDIV_MASK 0xF
>> +#define DRDU2_U2PLL_PDIV_OFFSET 1
>> +#define DRDU2_U2PLL_SUSPEND_EN BIT(0)
>> +
>> +#define DRDU2_PHY_CTRL 0x0C
>> +#define DRDU2_U2IDDQ BIT(30)
>> +#define DRDU2_U2SOFT_RST_N BIT(29)
>> +#define DRDU2_U2PHY_ON_FLAG BIT(22)
>> +#define DRDU2_U2PHY_PCTL_MASK 0xFFFF
>> +#define DRDU2_U2PHY_PCTL_OFFSET 6
>> +#define DRDU2_U2PHY_RESETB BIT(5)
>> +#define DRDU2_U2PHY_ISO BIT(4)
>> +#define DRDU2_U2AFE_BG_PWRDWNB BIT(3)
>> +#define DRDU2_U2AFE_PLL_PWRDWNB BIT(2)
>> +#define DRDU2_U2AFE_LDO_PWRDWNB BIT(1)
>> +#define DRDU2_U2CTRL_CORERDY BIT(0)
>> +
>> +#define DRDU2_STRAP_CTRL 0x18
>> +#define DRDU2_FORCE_HOST_MODE BIT(5)
>> +#define DRDU2_FORCE_DEVICE_MODE BIT(4)
>> +#define BDC_USB_STP_SPD_MASK 0x7
>> +#define BDC_USB_STP_SPD_OFFSET 0
>> +
>> +#define DRDU2_PWR_CTRL 0x1C
>> +#define DRDU2_U2PHY_DFE_SWITCH_PWROKIN_I BIT(2)
>> +#define DRDU2_U2PHY_DFE_SWITCH_PWRONIN_I BIT(1)
>> +
>> +#define DRDU2_SOFT_RESET_CTRL 0x20
>> +#define DRDU2_BDC_AXI_SOFT_RST_N BIT(0)
>> +
>> +#define USB3H_U2PLL_NDIV_FRAC 0x4
>> +
>> +#define USB3H_U2PLL_NDIV_INT 0x8
>> +
>> +#define USB3H_U2PLL_CTRL 0xC
>> +#define USB3H_U2PLL_LOCK BIT(6)
>> +#define USB3H_U2PLL_RESETB BIT(5)
>> +#define USB3H_U2PLL_PDIV_MASK 0xF
>> +#define USB3H_U2PLL_PDIV_OFFSET 1
>> +
>> +#define USB3H_U2PHY_CTRL 0x10
>> +#define USB3H_U2PHY_ON_FLAG 22
>> +#define USB3H_U2PHY_PCTL_MASK 0xFFFF
>> +#define USB3H_U2PHY_PCTL_OFFSET 6
>> +#define USB3H_U2PHY_RESETB BIT(5)
>> +#define USB3H_U2PHY_ISO BIT(4)
>> +#define USB3H_U2AFE_BG_PWRDWNB BIT(3)
>> +#define USB3H_U2AFE_PLL_PWRDWNB BIT(2)
>> +#define USB3H_U2AFE_LDO_PWRDWNB BIT(1)
>> +#define USB3H_U2CTRL_CORERDY BIT(0)
>> +
>> +#define USB3H_U3PHY_CTRL 0x14
>> +#define USB3H_U3SOFT_RST_N BIT(30)
>> +#define USB3H_U3MDIO_RESETB_I BIT(29)
>> +#define USB3H_U3POR_RESET_I BIT(28)
>> +#define USB3H_U3PHY_PCTL_MASK 0xFFFF
>> +#define USB3H_U3PHY_PCTL_OFFSET 2
>> +#define USB3H_U3PHY_RESETB BIT(1)
>> +
>> +#define USB3H_U3PHY_PLL_CTRL 0x18
>> +#define USB3H_U3PLL_REFCLK_MASK 0x7
>> +#define USB3H_U3PLL_REFCLK_OFFSET 4
>> +#define USB3H_U3PLL_SS_LOCK BIT(3)
>> +#define USB3H_U3PLL_SEQ_START BIT(2)
>> +#define USB3H_U3SSPLL_SUSPEND_EN BIT(1)
>> +#define USB3H_U3PLL_RESETB BIT(0)
>> +
>> +#define USB3H_PWR_CTRL 0x28
>> +#define USB3H_PWR_CTRL_OVERRIDE_I_R 4
>> +
>> +#define USB3H_SOFT_RESET_CTRL 0x2C
>> +#define USB3H_XHC_AXI_SOFT_RST_N BIT(1)
>> +
>> +#define USB3H_PHY_PWR_CTRL 0x38
>> +#define USB3H_DISABLE_USB30_P0 BIT(2)
>> +#define USB3H_DISABLE_EUSB_P1 BIT(1)
>> +#define USB3H_DISABLE_EUSB_P0 BIT(0)
>> +
>> +
>> +#define DRDU3_U2PLL_NDIV_FRAC 0x4
>> +
>> +#define DRDU3_U2PLL_NDIV_INT 0x8
>> +
>> +#define DRDU3_U2PLL_CTRL 0xC
>> +#define DRDU3_U2PLL_LOCK BIT(6)
>> +#define DRDU3_U2PLL_RESETB BIT(5)
>> +#define DRDU3_U2PLL_PDIV_MASK 0xF
>> +#define DRDU3_U2PLL_PDIV_OFFSET 1
>> +
>> +#define DRDU3_U2PHY_CTRL 0x10
>> +#define DRDU3_U2PHY_ON_FLAG BIT(22)
>> +#define DRDU3_U2PHY_PCTL_MASK 0xFFFF
>> +#define DRDU3_U2PHY_PCTL_OFFSET 6
>> +#define DRDU3_U2PHY_RESETB BIT(5)
>> +#define DRDU3_U2PHY_ISO BIT(4)
>> +#define DRDU3_U2AFE_BG_PWRDWNB BIT(3)
>> +#define DRDU3_U2AFE_PLL_PWRDWNB BIT(2)
>> +#define DRDU3_U2AFE_LDO_PWRDWNB BIT(1)
>> +#define DRDU3_U2CTRL_CORERDY BIT(0)
>> +
>> +#define DRDU3_U3PHY_CTRL 0x14
>> +#define DRDU3_U3XHC_SOFT_RST_N BIT(31)
>> +#define DRDU3_U3BDC_SOFT_RST_N BIT(30)
>> +#define DRDU3_U3MDIO_RESETB_I BIT(29)
>> +#define DRDU3_U3POR_RESET_I BIT(28)
>> +#define DRDU3_U3PHY_PCTL_MASK 0xFFFF
>> +#define DRDU3_U3PHY_PCTL_OFFSET 2
>> +#define DRDU3_U3PHY_RESETB BIT(1)
>> +
>> +#define DRDU3_U3PHY_PLL_CTRL 0x18
>> +#define DRDU3_U3PLL_REFCLK_MASK 0x7
>> +#define DRDU3_U3PLL_REFCLK_OFFSET 4
>> +#define DRDU3_U3PLL_SS_LOCK BIT(3)
>> +#define DRDU3_U3PLL_SEQ_START BIT(2)
>> +#define DRDU3_U3SSPLL_SUSPEND_EN BIT(1)
>> +#define DRDU3_U3PLL_RESETB BIT(0)
>> +
>> +#define DRDU3_STRAP_CTRL 0x28
>> +#define BDC_USB_STP_SPD_MASK 0x7
>> +#define BDC_USB_STP_SPD_OFFSET 0
>> +#define BDC_USB_STP_SPD_SS 0x0
>> +#define BDC_USB_STP_SPD_HS 0x2
>> +
>> +#define DRDU3_PWR_CTRL 0x2c
>> +#define DRDU3_PWR_CTRL_OVERRIDE_I_R 4
>> +
>> +#define DRDU3_SOFT_RESET_CTRL 0x30
>> +#define DRDU3_XHC_AXI_SOFT_RST_N BIT(1)
>> +#define DRDU3_BDC_AXI_SOFT_RST_N BIT(0)
>> +
>> +#define DRDU3_PHY_PWR_CTRL 0x3c
>> +#define DRDU3_DISABLE_USB30_P0 BIT(2)
>> +#define DRDU3_DISABLE_EUSB_P1 BIT(1)
>> +#define DRDU3_DISABLE_EUSB_P0 BIT(0)
>> +
>> +#define PLL_REFCLK_PAD 0x0
>> +#define PLL_REFCLK_25MHZ 0x1
>> +#define PLL_REFCLK_96MHZ 0x2
>> +#define PLL_REFCLK_INTERNAL 0x3
>> +#define PLL_LOCK_RETRY_COUNT 1000
>> +
>> +
>> +#define U2PLL_NDIV_INT_VAL 0x13
>> +#define U2PLL_NDIV_FRAC_VAL 0x1005
>> +#define U2PLL_PDIV_VAL 0x1
>> +/*
>> + * 0x0806 of PCTL_VAL has below bits set
>> + * BIT-8 : refclk divider 1
>> + * BIT-3:2: device mode; mode is not effect
>> + * BIT-1: soft reset active low
>> + */
>> +#define U2PHY_PCTL_VAL 0x0806
>> +#define U3PHY_PCTL_VAL 0x0006
>> +
>> +#define MAX_NR_PORTS 3
>> +
>> +#define USB3H_DRDU2_PHY 1
>> +#define DRDU3_PHY 2
>> +
>> +#define USB_HOST_MODE 1
>> +#define USB_DEV_MODE 2
>> +
>> +#define USB3SS_PORT 0
>> +#define DRDU2_PORT 1
>> +#define USB3HS_PORT 2
>> +
>> +#define DRD3SS_PORT 0
>> +#define DRD3HS_PORT 1
>> +
>> +struct sr_usb_phy {
>> + void __iomem *drdu2reg;
>> + void __iomem *usb3hreg;
>> + void __iomem *drdu3reg;
>> + uint32_t phy_id;
>> + struct sr_usb_phy_port *phy_port;
>> +};
>> +
>> +struct sr_usb_phy_port {
>> + uint32_t port_id;
>> + uint32_t mode;
>> + struct phy *gphy;
>> + struct sr_usb_phy *p;
>> +};
>> +
>> +static inline void reg32_clrbits(void __iomem *addr, uint32_t clear)
>> +{
>> + writel(readl(addr) & ~clear, addr);
> > +}
>> +
>> +static inline void reg32_setbits(void __iomem *addr, uint32_t set)
>> +{
>> + writel(readl(addr) | set, addr);
>> +}
>> +
>> +static int pll_lock_check(void __iomem *addr, u32 bit)
>> +{
>> + int retry;
>> + u32 rd_data;
>> +
>> + retry = PLL_LOCK_RETRY_COUNT;
>> + do {
>> + rd_data = readl(addr);
>> + if (rd_data & bit)
>> + return 0;
>> + udelay(1);
>> + } while (--retry > 0);
>> +
>> + pr_err("%s: FAIL\n", __func__);
>> + return -ETIMEDOUT;
>> +}
>
> It would be nice if you can prefix all functions with bcm_usb.
>> +
>> +static struct phy *bcm_usb_phy_xlate(struct device *dev,
>> + struct of_phandle_args *args)
>> +{
>> + struct sr_usb_phy_port *phy_port = dev_get_drvdata(dev);
>> + struct sr_usb_phy *p;
>> +
>> + if (!phy_port)
>> + return ERR_PTR(-EINVAL);
>> +
>> + p = phy_port->p;
>> +
>> + if (WARN_ON(args->args[0] < 1 || args->args[0] > 2))
>
> Please use constant enums. I think here it means
> PHY_MODE_USB_HOST/PHY_MODE_USB_DEVICE?
>> + return ERR_PTR(-EINVAL);
>> +
>> + if (WARN_ON(args->args_count < 1))
>> + return ERR_PTR(-EINVAL);
>> +
>> + if ((p->phy_id == USB3H_DRDU2_PHY) && (phy_port->port_id == 0) &&
>> + (args->args[0] == USB_DEV_MODE))
>> + return ERR_PTR(-EINVAL);
>
> port 0 cannot be used for host mode? How about other ports?
>> +
>> + phy_port->mode |= args->args[0];
>
> When is this mode used? If mode is never used, then this custom xlate is not
> required at all.
>> +
>> + return phy_port->gphy;
>> +}
>> +
>> +static int usb3h_u2_phy_power_on(void __iomem *regs)
>> +{
>> + u32 rd_data;
>> + int ret = 0;
>> +
>> + /* Set Core Ready high */
>> + reg32_setbits(regs + USB3H_U2PHY_CTRL, USB3H_U2CTRL_CORERDY);
>> + msleep(100);
>
> That looks like a huge delay? Is it really necessary
>> +
>> + rd_data = readl(regs + USB3H_U2PHY_CTRL);
>> + rd_data &= ~(USB3H_U2PHY_PCTL_MASK << USB3H_U2PHY_PCTL_OFFSET);
>> + rd_data |= (U2PHY_PCTL_VAL << USB3H_U2PHY_PCTL_OFFSET);
>> + writel(rd_data, regs + USB3H_U2PHY_CTRL);
>> +
>> + msleep(300);
>
> one more here.
>> + reg32_setbits(regs + USB3H_U2PLL_CTRL,
>> + USB3H_U2PLL_RESETB);
>> +
>> + reg32_setbits(regs + USB3H_U2PHY_CTRL,
>> + USB3H_U2PHY_RESETB);
>> +
>> + ret = pll_lock_check(regs + USB3H_U2PLL_CTRL, USB3H_U2PLL_LOCK);
>> +
>> + return ret;
>> +}
>> +
>> +
>> +static int usb3h_u3_phy_power_on(void __iomem *regs)
>> +{
>> + u32 rd_data;
>> + int ret = 0;
>> +
>> + /* Set pctl with mode and soft reset */
>> + rd_data = readl(regs + USB3H_U3PHY_CTRL);
>> + rd_data &= ~(USB3H_U3PHY_PCTL_MASK << USB3H_U3PHY_PCTL_OFFSET);
>> + rd_data |= (U3PHY_PCTL_VAL << USB3H_U3PHY_PCTL_OFFSET);
>> + writel(rd_data, regs + USB3H_U3PHY_CTRL);
>> +
>> + reg32_clrbits(regs + USB3H_U3PHY_PLL_CTRL,
>> + USB3H_U3SSPLL_SUSPEND_EN);
>> + reg32_setbits(regs + USB3H_U3PHY_PLL_CTRL,
>> + USB3H_U3PLL_SEQ_START);
>> + reg32_setbits(regs + USB3H_U3PHY_PLL_CTRL,
>> + USB3H_U3PLL_RESETB);
>> +
>> + msleep(30);
>> +
>> + ret = pll_lock_check(regs + USB3H_U3PHY_PLL_CTRL, USB3H_U3PLL_SS_LOCK);
>> +
>> + return ret;
>> +}
>> +
>> +
>> +static int drdu3_u2_phy_power_on(void __iomem *regs)
>> +{
>> + u32 rd_data;
>> + int ret = 0;
>> +
>> + /* Set Core Ready high */
>> + reg32_setbits(regs + DRDU3_U2PHY_CTRL, DRDU3_U2CTRL_CORERDY);
>> +
>> + msleep(100);
>> +
>> + rd_data = readl(regs + DRDU3_STRAP_CTRL);
>> + rd_data &= (~(BDC_USB_STP_SPD_MASK << BDC_USB_STP_SPD_OFFSET));
>> + rd_data |= (BDC_USB_STP_SPD_SS << BDC_USB_STP_SPD_OFFSET);
>> + writel(rd_data, regs + DRDU3_STRAP_CTRL);
>> +
>> + rd_data = readl(regs + DRDU3_U2PHY_CTRL);
>> + rd_data &= ~(DRDU3_U2PHY_PCTL_MASK << DRDU3_U2PHY_PCTL_OFFSET);
>> + rd_data |= (U2PHY_PCTL_VAL << DRDU3_U2PHY_PCTL_OFFSET);
>> + writel(rd_data, regs + DRDU3_U2PHY_CTRL);
>> +
>> + msleep(300);
>> +
>> + reg32_setbits(regs + DRDU3_U2PLL_CTRL,
>> + DRDU3_U2PLL_RESETB);
>> +
>> + reg32_setbits(regs + DRDU3_U2PHY_CTRL,
>> + DRDU3_U2PHY_RESETB);
>> +
>> + ret = pll_lock_check(regs + DRDU3_U2PLL_CTRL, DRDU3_U2PLL_LOCK);
>> +
>> + return ret;
>> +}
>> +
>> +static int drdu3_u3_phy_power_on(void __iomem *regs)
>> +{
>> + u32 rd_data;
>> + int ret = 0;
>> +
>> + /* Set pctl with mode and soft reset */
>> + rd_data = readl(regs + DRDU3_U3PHY_CTRL);
>> + rd_data &= ~(DRDU3_U3PHY_PCTL_MASK << DRDU3_U3PHY_PCTL_OFFSET);
>> + rd_data |= (U3PHY_PCTL_VAL << DRDU3_U3PHY_PCTL_OFFSET);
>> + writel(rd_data, regs + DRDU3_U3PHY_CTRL);
>> +
>> + reg32_clrbits(regs + DRDU3_U3PHY_PLL_CTRL,
>> + DRDU3_U3SSPLL_SUSPEND_EN);
>> + reg32_setbits(regs + DRDU3_U3PHY_PLL_CTRL,
>> + DRDU3_U3PLL_SEQ_START);
>> + reg32_setbits(regs + DRDU3_U3PHY_PLL_CTRL,
>> + DRDU3_U3PLL_RESETB);
>> +
>> + msleep(30);
>> +
>> + ret = pll_lock_check(regs + DRDU3_U3PHY_PLL_CTRL, DRDU3_U3PLL_SS_LOCK);
>> +
>> + return ret;
>> +}
>> +
>> +
>> +static int drdu2_u2_phy_power_on(void __iomem *regs)
>> +{
>> + u32 rd_data;
>> + int ret = 0;
>> +
>> + writel(U2PLL_NDIV_INT_VAL, regs + DRDU2_U2PLL_NDIV_INT);
>> + writel(U2PLL_NDIV_FRAC_VAL, regs + DRDU2_U2PLL_NDIV_FRAC);
>> +
>> + rd_data = readl(regs + DRDU2_U2PLL_CTRL);
>> + rd_data &= ~(DRDU2_U2PLL_PDIV_MASK << DRDU2_U2PLL_PDIV_OFFSET);
>> + rd_data |= (U2PLL_PDIV_VAL << DRDU2_U2PLL_PDIV_OFFSET);
>> + writel(rd_data, regs + DRDU2_U2PLL_CTRL);
>> +
>> + reg32_setbits(regs + DRDU2_PHY_CTRL, DRDU2_U2CTRL_CORERDY);
>> +
>> + msleep(100);
>> + reg32_setbits(regs + DRDU2_U2PLL_CTRL,
>> + DRDU2_U2PLL_RESETB);
>> +
>> + reg32_setbits(regs + DRDU2_PHY_CTRL,
>> + DRDU2_U2PHY_RESETB);
>> +
>> + rd_data = readl(regs + DRDU2_PHY_CTRL);
>> + rd_data &= ~(DRDU2_U2PHY_PCTL_MASK << DRDU2_U2PHY_PCTL_OFFSET);
>> + rd_data |= (U2PHY_PCTL_VAL << DRDU2_U2PHY_PCTL_OFFSET);
>> + writel(rd_data, regs + DRDU2_PHY_CTRL);
>> +
>> + ret = pll_lock_check(regs + DRDU2_U2PLL_CTRL, DRDU2_U2PLL_LOCK);
>> +
>> + return ret;
>> +}
>> +static int sr_u3h_u2drd_phy_reset(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> +
>> + switch (phy_port->port_id) {
>> + case USB3HS_PORT:
>> + reg32_clrbits(p->usb3hreg + USB3H_U2PHY_CTRL,
>> + USB3H_U2CTRL_CORERDY);
>> + reg32_setbits(p->usb3hreg + USB3H_U2PHY_CTRL,
>> + USB3H_U2CTRL_CORERDY);
>> + break;
>> + case DRDU2_PORT:
>> + reg32_clrbits(p->drdu2reg + DRDU2_PHY_CTRL,
>> + DRDU2_U2CTRL_CORERDY);
>> + reg32_setbits(p->drdu2reg + DRDU2_PHY_CTRL,
>> + DRDU2_U2CTRL_CORERDY);
>> + break;
>> + }
>> + return 0;
>> +}
>> +
>> +static int sr_u3drd_phy_reset(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> +
>> + switch (phy_port->port_id) {
>> + case DRD3HS_PORT:
>> + reg32_clrbits(p->drdu3reg + DRDU3_U2PHY_CTRL,
>> + DRDU3_U2CTRL_CORERDY);
>> + reg32_setbits(p->drdu3reg + DRDU3_U2PHY_CTRL,
>> + DRDU3_U2CTRL_CORERDY);
>> + break;
>> + }
>> + return 0;
>> +}
>> +
>> +static int sr_u3h_u2drd_phy_power_on(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> + int ret = 0;
>> +
>> + switch (phy_port->port_id) {
>> + case USB3SS_PORT:
>> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_USB30_P0);
>> + ret = usb3h_u3_phy_power_on(p->usb3hreg);
>> + if (ret)
>> + goto err_usb3h_phy_on;
>> + break;
>> + case USB3HS_PORT:
>> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_EUSB_P1);
>> + ret = usb3h_u2_phy_power_on(p->usb3hreg);
>> + if (ret)
>> + goto err_usb3h_phy_on;
>> +
>> + break;
>> + case DRDU2_PORT:
>> + reg32_clrbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_EUSB_P0);
>> +
>> + ret = drdu2_u2_phy_power_on(p->drdu2reg);
>> + if (ret) {
>> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_EUSB_P0);
>> + goto err_drdu2_phy_on;
>> + }
>> + break;
>> + }
>> +
>> + /* Device Mode */
>> + if (phy_port->port_id == DRDU2_PORT) {
>> + writel(DRDU2_BDC_AXI_SOFT_RST_N,
>> + p->drdu2reg + DRDU2_SOFT_RESET_CTRL);
>> + reg32_setbits(p->drdu2reg + DRDU2_PHY_CTRL,
>> + DRDU2_U2SOFT_RST_N);
>> + }
>> + /* Host Mode */
>> + writel(USB3H_XHC_AXI_SOFT_RST_N,
>> + p->usb3hreg + USB3H_SOFT_RESET_CTRL);
>> + reg32_setbits(p->usb3hreg + USB3H_U3PHY_CTRL,
>> + USB3H_U3SOFT_RST_N);
>> +
>> + return 0;
>> +err_usb3h_phy_on:
>> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + (USB3H_DISABLE_EUSB_P1 |
>> + USB3H_DISABLE_USB30_P0));
>> +err_drdu2_phy_on:
>> +
>> + return ret;
>> +}
>> +
>> +static int sr_u3drd_phy_power_on(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> + int ret = 0;
>> +
>> + switch (phy_port->port_id) {
>> + case DRD3SS_PORT:
>> + reg32_clrbits(p->drdu3reg + USB3H_PHY_PWR_CTRL,
>> + DRDU3_DISABLE_USB30_P0);
>> +
>> + ret = drdu3_u3_phy_power_on(p->drdu3reg);
>> + if (ret)
>> + goto err_drdu3_phy_on;
>> + break;
>> + case DRD3HS_PORT:
>> + reg32_clrbits(p->drdu3reg + USB3H_PHY_PWR_CTRL,
>> + DRDU3_DISABLE_EUSB_P0);
>> + ret = drdu3_u2_phy_power_on(p->drdu3reg);
>> + if (ret)
>> + goto err_drdu3_phy_on;
>> + break;
>> + }
>> + /* Host Mode */
>> + reg32_setbits(p->drdu3reg + DRDU3_SOFT_RESET_CTRL,
>> + DRDU3_XHC_AXI_SOFT_RST_N);
>> + reg32_setbits(p->drdu3reg + DRDU3_U3PHY_CTRL,
>> + DRDU3_U3XHC_SOFT_RST_N);
>> + /* Device Mode */
>> + reg32_setbits(p->drdu3reg + DRDU3_SOFT_RESET_CTRL,
>> + DRDU3_BDC_AXI_SOFT_RST_N);
>> + reg32_setbits(p->drdu3reg + DRDU3_U3PHY_CTRL,
>> + DRDU3_U3BDC_SOFT_RST_N);
>> +
>> + return 0;
>> +err_drdu3_phy_on:
>> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
>> + (DRDU3_DISABLE_EUSB_P0 |
>> + DRDU3_DISABLE_USB30_P0));
>> +
>> + return ret;
>> +}
>> +
>> +static int sr_u3h_u2drd_phy_power_off(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> +
>> + switch (phy_port->port_id) {
>> + case USB3SS_PORT:
>> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_USB30_P0);
>> + break;
>> + case USB3HS_PORT:
>> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_EUSB_P1);
>> + break;
>> + case DRDU2_PORT:
>> + reg32_setbits(p->usb3hreg + USB3H_PHY_PWR_CTRL,
>> + USB3H_DISABLE_EUSB_P0);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int sr_u3drd_phy_power_off(struct phy *gphy)
>> +{
>> + struct sr_usb_phy_port *phy_port = phy_get_drvdata(gphy);
>> + struct sr_usb_phy *p = phy_port->p;
>> +
>> + switch (phy_port->port_id) {
>> + case DRD3SS_PORT:
>> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
>> + DRDU3_DISABLE_USB30_P0);
>> + break;
>> + case DRD3HS_PORT:
>> + reg32_setbits(p->drdu3reg + DRDU3_PHY_PWR_CTRL,
>> + DRDU3_DISABLE_EUSB_P0);
>> + break;
>> + }
>> + return 0;
>> +}
>> +
>> +static struct phy_ops sr_u3h_u2drd_phy_ops = {
>> + .power_on = sr_u3h_u2drd_phy_power_on,
>> + .power_off = sr_u3h_u2drd_phy_power_off,
>> + .reset = sr_u3h_u2drd_phy_reset,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static struct phy_ops sr_u3drd_phy_ops = {
>> + .power_on = sr_u3drd_phy_power_on,
>> + .power_off = sr_u3drd_phy_power_off,
>> + .reset = sr_u3drd_phy_reset,
>> + .owner = THIS_MODULE,
>> +};
>
> Can you split this patch into 2 so that it's easier to review. 1st patch add
> u2drd_phy and then add u3drd_phy.
>> +
>> +static const struct of_device_id sr_usb_phy_of_match[] = {
>> + {
>> + .compatible = "brcm,sr-u3h-u2drd-phy",
>> + .data = &sr_u3h_u2drd_phy_ops,
>> + },
>> + {
>> + .compatible = "brcm,sr-u3drd-phy",
>> + .data = &sr_u3drd_phy_ops,
>> + },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, sr_usb_phy_of_match);
>> +
>> +static int sr_usb_phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct sr_usb_phy *p;
>> + struct device_node *dn = dev->of_node, *child;
>> + struct resource *res;
>> + struct phy *gphy;
>> + const struct phy_ops *ops;
>> + struct phy_provider *phy_provider;
>> + const struct of_device_id *match;
>> + struct sr_usb_phy_port *phy_port;
>> + uint32_t child_cnt, cnt = 0;
>> +
>> + match = of_match_node(sr_usb_phy_of_match, dn);
>> + if (!match) {
>> + dev_err(dev, "of_match_node() failed\n");
>> + return -EINVAL;
>> + }
>> + ops = match->data;
>> +
>> + child_cnt = of_get_child_count(dn);
>> + if (!child_cnt || child_cnt > MAX_NR_PORTS)
>> + return -ENODEV;
>> +
>> + p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
>> + if (!p)
>> + return -ENOMEM;
>> +
>> + p->phy_port = devm_kcalloc(dev, child_cnt,
>> + sizeof(struct sr_usb_phy_port),
>> + GFP_KERNEL);
>> + if (!p->phy_port)
>> + return -ENOMEM;
>> +
>> + if (of_device_is_compatible(dn, "brcm,sr-u3h-u2drd-phy")) {
>> + void __iomem *drdu2reg, *usb3hreg;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> + "drdu2");
>> + drdu2reg = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(drdu2reg))
>> + return PTR_ERR(drdu2reg);
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> + "usb3h");
>> + usb3hreg = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(usb3hreg))
>> + return PTR_ERR(usb3hreg);
>> +
>> + p->drdu2reg = drdu2reg;
>> + p->usb3hreg = usb3hreg;
>> + p->phy_id = USB3H_DRDU2_PHY;
>> + }
>> + if (of_device_is_compatible(dn, "brcm,sr-u3drd-phy")) {
>> + void __iomem *drdu3reg;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> + "drdu3");
>> + drdu3reg = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(drdu3reg))
>> + return PTR_ERR(drdu3reg);
>> +
>> + p->drdu3reg = drdu3reg;
>> + p->phy_id = DRDU3_PHY;
>> + }
>> +
>> + for_each_available_child_of_node(dn, child) {
>> + phy_port = &p->phy_port[cnt];
>> + if (of_property_read_u32(child, "reg", &phy_port->port_id)) {
>> + dev_err(dev, "missing reg property in node %s\n",
>> + child->name);
>> + return -EINVAL;
>> + }
>> + if (phy_port->port_id >= MAX_NR_PORTS)
>> + return -EINVAL;
>> +
>> + gphy = devm_phy_create(dev, child, ops);
>> + if (IS_ERR(gphy))
>> + return PTR_ERR(gphy);
>> +
>> + phy_set_drvdata(gphy, phy_port);
>> + dev_set_drvdata(&gphy->dev, phy_port);
>
> why do you need dev_set_drvdata when phy_set_drvdata already saves private data
> for you?
>
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
