Add fallback compatibility string for R-Car Gen 2 and 3.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
Based on libata/for-next
---
Documentation/devicetree/bindings/ata/sata_rcar.txt | 14 +++++++++++---
drivers/ata/sata_rcar.c | 8 ++++++++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 0764f9ab63dc..e20eac7a3087 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -1,14 +1,22 @@
* Renesas R-Car SATA
Required properties:
-- compatible : should contain one of the following:
+- compatible : should contain one or more of the following:
- "renesas,sata-r8a7779" for R-Car H1
- ("renesas,rcar-sata" is deprecated)
- "renesas,sata-r8a7790-es1" for R-Car H2 ES1
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
- "renesas,sata-r8a7795" for R-Car H3
+ - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
+ - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+ - "renesas,rcar-sata" is deprecated
+
+ When compatible with the generic version nodes
+ must list the SoC-specific version corresponding
+ to the platform first followed by the generic
+ version.
+
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.
@@ -16,7 +24,7 @@ Required properties:
Example:
sata0: sata@ee300000 {
- compatible = "renesas,sata-r8a7791";
+ compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index ee9844758736..537d11869069 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -858,6 +858,14 @@ static const struct of_device_id sata_rcar_match[] = {
.compatible = "renesas,sata-r8a7795",
.data = (void *)RCAR_GEN2_SATA
},
+ {
+ .compatible = "renesas,rcar-gen2-sata",
+ .data = (void *)RCAR_GEN2_SATA
+ },
+ {
+ .compatible = "renesas,rcar-gen3-sata",
+ .data = (void *)RCAR_GEN2_SATA
+ },
{ },
};
MODULE_DEVICE_TABLE(of, sata_rcar_match);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
