Hi Vladimir,
On Monday 10 Jul 2017 19:28:57 Vladimir Barinov wrote:
> On 10.07.2017 16:09, Laurent Pinchart wrote:
> > On Friday 07 Jul 2017 05:37:36 Vladimir Barinov wrote:
> >> From: Vladimir Barinov <vladimir.barinov+renesas@xxxxxxxxxxxxxxxxxx>
> >>
> >> The ULCB board has one HDMI output connector.
> >>
> >> This connector is available on both the H3 and M3-W ULCB boards.
> >> Add this to the ulcb.dtsi file.
> >>
> >> Signed-off-by: Vladimir Barinov
> >> <vladimir.barinov+renesas@xxxxxxxxxxxxxxxxxx> ---
> >>
> >> arch/arm64/boot/dts/renesas/ulcb.dtsi | 11 +++++++++++
> >> 1 file changed, 11 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi
> >> b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 6f0a7ca..fc5408d 100644
> >> --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
> >> +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
> >> @@ -34,6 +34,17 @@
> >>
> >> clock-frequency = <11289600>;
> >>
> >> };
> >>
> >> + hdmi0-out {
> >> + compatible = "hdmi-connector";
> >> + label = "HDMI0 OUT";
> >
> > As far as I know there is no "HDMI0 OUT" label on the board or casing. You
> > can remove the label property. Apart from that,
>
> I was thinking that this is a label on schematic.
>
> ULCB has similar schematic label as first HDMI connector on Salvator-X
> "HDMI output(HDMI0)", hence I've just copied label name from Salvator-X
> file.
>
> Right, there is no such name on ULCB pcb or plastic cover.
Yes, that's the difference with the Salvator-X, where the plastic cover has a
label.
> Is it okay If I resend only one patch with label field removed?
Sure.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
