On 2017-07-10 16:09, Linus Walleij wrote:
> This is not a legal device tree property, because its binding has
> not been reviewed and approved, nor does it exist in any device
> tree binding document.
>
> It is further wrong, because it is added to the GPIO offset which
> is by definition controller-local.
>
> Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> This got in because I was stressed and was not paying attention.
> Sorry about not noticing earlier, but I usually strongly nix any
> such properties, please discuss this on the device tree list
> first.
> ---
> drivers/gpio/gpio-exar.c | 25 +++++++++----------------
> drivers/tty/serial/8250/8250_exar.c | 2 --
> 2 files changed, 9 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
> index fb8d304cfa17..d02c5260525f 100644
> --- a/drivers/gpio/gpio-exar.c
> +++ b/drivers/gpio/gpio-exar.c
> @@ -31,7 +31,6 @@ struct exar_gpio_chip {
> int index;
> void __iomem *regs;
> char name[20];
> - unsigned int first_pin;
> };
>
> static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
> @@ -53,9 +52,9 @@ static int exar_set_direction(struct gpio_chip *chip, int direction,
> unsigned int offset)
> {
> struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
> - unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
> + unsigned int addr = offset / 8 ?
> EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
> - unsigned int bit = (offset + exar_gpio->first_pin) % 8;
> + unsigned int bit = offset % 8;
>
> exar_update(chip, addr, direction, bit);
> return 0;
> @@ -76,9 +75,9 @@ static int exar_get(struct gpio_chip *chip, unsigned int reg)
> static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
> {
> struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
> - unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
> + unsigned int addr = offset / 8 ?
> EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
> - unsigned int bit = (offset + exar_gpio->first_pin) % 8;
> + unsigned int bit = offset % 8;
>
> return !!(exar_get(chip, addr) & BIT(bit));
> }
> @@ -86,9 +85,9 @@ static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
> static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
> {
> struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
> - unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
> + unsigned int addr = offset / 8 ?
> EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
> - unsigned int bit = (offset + exar_gpio->first_pin) % 8;
> + unsigned int bit = offset % 8;
>
> return !!(exar_get(chip, addr) & BIT(bit));
> }
> @@ -97,9 +96,9 @@ static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
> int value)
> {
> struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
> - unsigned int addr = (offset + exar_gpio->first_pin) / 8 ?
> + unsigned int addr = offset / 8 ?
> EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
> - unsigned int bit = (offset + exar_gpio->first_pin) % 8;
> + unsigned int bit = offset % 8;
>
> exar_update(chip, addr, value, bit);
> }
> @@ -120,7 +119,7 @@ static int gpio_exar_probe(struct platform_device *pdev)
> {
> struct pci_dev *pcidev = to_pci_dev(pdev->dev.parent);
> struct exar_gpio_chip *exar_gpio;
> - u32 first_pin, ngpios;
> + u32 ngpios;
> void __iomem *p;
> int index, ret;
>
> @@ -132,11 +131,6 @@ static int gpio_exar_probe(struct platform_device *pdev)
> if (!p)
> return -ENOMEM;
>
> - ret = device_property_read_u32(&pdev->dev, "linux,first-pin",
> - &first_pin);
> - if (ret)
> - return ret;
> -
> ret = device_property_read_u32(&pdev->dev, "ngpios", &ngpios);
> if (ret)
> return ret;
> @@ -161,7 +155,6 @@ static int gpio_exar_probe(struct platform_device *pdev)
> exar_gpio->gpio_chip.ngpio = ngpios;
> exar_gpio->regs = p;
> exar_gpio->index = index;
> - exar_gpio->first_pin = first_pin;
>
> ret = devm_gpiochip_add_data(&pdev->dev,
> &exar_gpio->gpio_chip, exar_gpio);
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index b5c98e5bf524..4fb3a4ed4a1f 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -261,7 +261,6 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev,
> }
>
> static const struct property_entry exar_gpio_properties[] = {
> - PROPERTY_ENTRY_U32("linux,first-pin", 0),
> PROPERTY_ENTRY_U32("ngpios", 16),
> { }
> };
> @@ -326,7 +325,6 @@ static int iot2040_rs485_config(struct uart_port *port,
> }
>
> static const struct property_entry iot2040_gpio_properties[] = {
> - PROPERTY_ENTRY_U32("linux,first-pin", 10),
> PROPERTY_ENTRY_U32("ngpios", 1),
> { }
> };
>
Sorry for the mess, I didn't know the proper process in details.
However, just reverting breaks the IOT2000, need to check if there are
even physical risks. How can we quickly resolve this to proper mechanism?
Jan
--
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
