Re: [PATCH v16 2/7] power: add power sequence library

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Saturday, July 08, 2017 01:51:15 PM Peter Chen wrote:
> On Fri, Jul 07, 2017 at 03:03:06PM +0200, Rafael J. Wysocki wrote:
> > On Friday, July 07, 2017 04:01:07 PM Peter Chen wrote:
> > > On Fri, Jul 07, 2017 at 03:13:48AM +0200, Rafael J. Wysocki wrote:
> > > > > 
> > > > > - Can I write new code for it or I need to depend on something?
> > > > 
> > > > There is nothing this code needs to depend on AFAICS, but there are existing
> > > > solutions in this problem space (ACPI power management, genpd), so it needs to
> > > > be careful enough about possible overlaps etc.
> > > > 
> > > > > I find there is already "power state" concept at documentation.
> > > > > Documentation/ABI/testing/sysfs-devices-power_state
> > > > 
> > > > This is ACPI-specific and only in sysfs directories representing ACPI device
> > > > objects (which aren't physical devices).
> > > > 
> > > > Anyway, since ACPI covers the problem space you are working in already,
> > > > your code has to be mutually exclusive with it.
> > > > 
> > > > > - If I can write the new code for it, except the problems I want
> > > > > to fix, are there any other use cases I need to consider?
> > > > 
> > > > I would start simple and focus on the particular problem at hand, that is
> > > > devices with two power states ("on" and "off") where the "on" state
> > > > depends on a number of clocks and/or GPIOs.  Still, I'd also avoid making
> > > > design choices that might prevent it from being extended in the future
> > > > if need be.
> > > > 
> > > > One major problem I can see is how to "attach" the power states framework
> > > > to a particular device (once we have discovered that it should be used with
> > > > that device).
> > > > 
> > > > For bus types that don't do power management of their own you could follow
> > > > ACPI (and genpd) and provide a PM domain for this purpose, but bus types
> > > > doing their own PM (like USB) will probably need to be treated differently.
> > > > In those cases the bus type code will have to know that it should call some
> > > > helpers to switch power states of devices.
> > > > 
> > > 
> > > After thinking more, using a power state framework is seems too heavy
> > > for this use case. This use case is just do some clock and gpio
> > > operations before device is created, and do some put operations
> > > after device is deleted. We just need some helpers in one structure
> > > (called "power sequence" or "power state") for this purpose.
> > > 
> > > For the use case, the clock and gpio operation can be done after device
> > > is created, the power domain is more suitable.
> > 
> > There is a problem with PM domains that they only provide hooks for runtime PM
> > and system suspend/resume (including hibernation) and not for generic
> > "power up" and "power down" operations that may need to be carried out at
> > probe time before the runtime PM framework can be used (and analogously
> > at remove time).
> > 
> > I would consider starting with the patch below or similar.
> > 
> > Then you can define something like POWER_STATE_SEQUENCE type for your
> > case and basically use almost what you have already with it, except that
> > struct pwrsec_generic will now become struct power_state_sequence and
> > struct power_state_info will be embedded in it instead of struct pwrsec.
> > 
> > The major comceptual difference is that ->power_up and ->power_down are
> > now available at the level of the device that needs the power sequence and
> > pm_device_power_up/down() can be used wherever necessary (in the code,
> > in a bus type, in a controller driver or even in the driver for this particular
> > device).
> 
> Rafeal, thanks for your patch.
> 
> The biggest problem for my use case is the device is still not created.
> How can I call pm_device_power_up(dev)?

Can you please elaborate on that a bit?

You surely need a device object before probing the device and why would the
device be accessed before that point?

I guess you have a bus with devices that are discoverable in principle, but
they cannot be discovered before being powered up, so you need the information
on which devices to power up in a DT, right?

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux