Add a 'bypass-reg' binding property for the Stratix10 clock. There are quite a few clocks on the Stratix10 platform that have a separate bypass setting from the clock's original parent. The 'bypass-reg' binding contains the bypass register offset from the clock manager's base address and a bit index. Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> --- Documentation/devicetree/bindings/clock/altr_socfpga.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt index 1c32658..9e2754a 100644 --- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt +++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt @@ -42,3 +42,6 @@ Optional properties: value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct hold/delay times that is needed for the SD/MMC CIU clock. The values of both can be 0-315 degrees, in 45 degree increments. +- bypass-reg : There are a few clocks on the Stratix10 platform that can be + bypassed from their original parents to a separate clock. This binding + property contains the bypass register and the bit index. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
