This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs and devicetree binding documentation. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx> --- .../devicetree/bindings/input/clps711x-keypad.txt | 29 +++ drivers/input/keyboard/Kconfig | 12 ++ drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/clps711x-keypad.c | 209 +++++++++++++++++++++ 4 files changed, 251 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/clps711x-keypad.txt create mode 100644 drivers/input/keyboard/clps711x-keypad.c diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt new file mode 100644 index 0000000..26b7fe5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt @@ -0,0 +1,29 @@ +* Cirrus Logic CLPS711X matrix keypad device tree bindings + +Required Properties: +- compatible: Should be "cirrus,clps711x--keypad". +- syscon: phandle to syscon device node which control keypad (SYSCON1). +- row-gpios: List of GPIOs used as row lines. +- poll-interval: Poll interval time in milliseconds. +- linux,keymap: The definition can be found at + bindings/input/matrix-keymap.txt. + +Optional Properties: +- autorepeat: Enable autorepeat feature. + +Example: + keypad { + compatible = "cirrus,clps711x--keypad"; + syscon = <&syscon1>; + autorepeat; + poll-interval = <120>; + row-gpios = <&porta 0 0>, + <&porta 1 0>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_RIGHT) + >; + }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a673c9f..126901b 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -151,6 +151,18 @@ config KEYBOARD_BFIN To compile this driver as a module, choose M here: the module will be called bf54x-keys. +config KEYBOARD_CLPS711X + tristate "CLPS711X Keypad support" + depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) + select INPUT_MATRIXKMAP + select INPUT_POLLDEV + help + Say Y here to enable the matrix keypad on the Cirrus Logic + CLPS711X CPU. + + To compile this driver as a module, choose M here: the + module will be called clps711x-keypad. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a699b61..f8589fe 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c new file mode 100644 index 0000000..1e2c93f --- /dev/null +++ b/drivers/input/keyboard/clps711x-keypad.c @@ -0,0 +1,209 @@ +/* + * Cirrus Logic CLPS711X Keypad driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@xxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> + +#define CLPS711X_KEYPAD_COL_COUNT 8 + +struct clps711x_gpio_data { + int gpio; + bool active_low; + DECLARE_BITMAP(last_state, CLPS711X_KEYPAD_COL_COUNT); +}; + +struct clps711x_keypad_data { + struct regmap *syscon; + int row_count; + unsigned int row_shift; + struct clps711x_gpio_data *gpio_data; +}; + +static void clps711x_keypad_poll(struct input_polled_dev *dev) +{ + const unsigned short *keycodes = dev->input->keycode; + struct clps711x_keypad_data *priv = dev->private; + int col, row; + + for (col = 0; col < CLPS711X_KEYPAD_COL_COUNT; col++) { + /* Assert column */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(8 + col)); + + /* Scan rows */ + for (row = 0; row < priv->row_count; row++) { + struct clps711x_gpio_data *data = &priv->gpio_data[row]; + bool state, state1; + + /* Protection against fluctuations */ + do { + state = gpio_get_value_cansleep(data->gpio); + udelay(1); + state1 = gpio_get_value_cansleep(data->gpio); + } while (state != state1); + + state ^= data->active_low; + + if (test_bit(col, data->last_state) != state) { + int code = MATRIX_SCAN_CODE(row, col, + priv->row_shift); + + if (state) + set_bit(col, data->last_state); + else + clear_bit(col, data->last_state); + + input_event(dev->input, EV_MSC, MSC_SCAN, code); + if (keycodes[code]) + input_report_key(dev->input, + keycodes[code], state); + } + } + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, SYSCON1_KBDSCAN(1)); + } + + input_sync(dev->input); +} + +static int clps711x_keypad_probe(struct platform_device *pdev) +{ + struct clps711x_keypad_data *priv; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct input_polled_dev *poll_dev; + u32 poll_interval; + int i, err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + + priv->row_count = of_gpio_named_count(np, "row-gpios"); + if (priv->row_count < 1) + return -EINVAL; + + priv->gpio_data = devm_kzalloc(dev, sizeof(*priv->gpio_data) * + priv->row_count, GFP_KERNEL); + if (!priv->gpio_data) + return -ENOMEM; + + priv->row_shift = get_count_order(CLPS711X_KEYPAD_COL_COUNT); + + for (i = 0; i < priv->row_count; i++) { + struct clps711x_gpio_data *data = &priv->gpio_data[i]; + enum of_gpio_flags flg; + + data->gpio = of_get_named_gpio_flags(np, "row-gpios", i, &flg); + if (data->gpio < 0) + return data->gpio; + + err = devm_gpio_request_one(dev, data->gpio, GPIOF_IN, NULL); + if (err) + return err; + + data->active_low = flg & OF_GPIO_ACTIVE_LOW; + } + + err = of_property_read_u32(np, "poll-interval", &poll_interval); + if (err) + return err; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) + return -ENOMEM; + + poll_dev->private = priv; + poll_dev->poll = clps711x_keypad_poll; + poll_dev->poll_interval = poll_interval; + poll_dev->input->name = pdev->name; + poll_dev->input->dev.parent = &pdev->dev; + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->id.vendor = 0x0001; + poll_dev->input->id.product = 0x0001; + poll_dev->input->id.version = 0x0100; + + err = matrix_keypad_build_keymap(NULL, NULL, priv->row_count, + CLPS711X_KEYPAD_COL_COUNT, + NULL, poll_dev->input); + if (err) + goto out_err; + + input_set_capability(poll_dev->input, EV_MSC, MSC_SCAN); + if (of_property_read_bool(np, "autorepeat")) + __set_bit(EV_REP, poll_dev->input->evbit); + + platform_set_drvdata(pdev, poll_dev); + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(1)); + + err = input_register_polled_device(poll_dev); + if (err) + goto out_err; + + /* Report initial state */ + clps711x_keypad_poll(poll_dev); + + return 0; + +out_err: + input_free_polled_device(poll_dev); + + return err; +} + +static int clps711x_keypad_remove(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev = platform_get_drvdata(pdev); + + input_unregister_polled_device(poll_dev); + input_free_polled_device(poll_dev); + + return 0; +} + +static struct of_device_id clps711x_keypad_of_match[] = { + { .compatible = "cirrus,clps711x-keypad", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match); + +static struct platform_driver clps711x_keypad_driver = { + .driver = { + .name = "clps711x-keypad", + .owner = THIS_MODULE, + .of_match_table = clps711x_keypad_of_match, + }, + .probe = clps711x_keypad_probe, + .remove = clps711x_keypad_remove, +}; +module_platform_driver(clps711x_keypad_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@xxxxxxx>"); +MODULE_DESCRIPTION("Cirrus Logic CLPS711X Keypad driver"); +MODULE_LICENSE("GPL"); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html