On Thu, Jun 29, 2017 at 02:39:11PM +0300, Claudiu Beznea wrote: > Document "start-offset" binding that will be used by at24 > EEPROM driver. Why do we need this property? Seems like this should be handled by defining regions of the EEPROM that you care about (or perhaps are reserved and don't want to touch). Just a single offset value is not very flexible. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/eeprom/eeprom.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt > index a50dc01..e0bec50 100644 > --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt > +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt > @@ -35,10 +35,13 @@ Optional properties: > > - read-only: this parameterless property disables writes to the eeprom > > + - start-offset: offset in EEPROM to start reading from > + > Example: > > eeprom@52 { > compatible = "atmel,24c32"; > reg = <0x52>; > pagesize = <32>; > + start-offset = /bits/ 8 <0xf8>; The size of the property is part of the ABI. Unless you *never* need offset of more than 256, then this should be 32-bit. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html