On 06/30/2017 08:05 AM, Zhi Mao wrote:
In original code, the pwm output frequency is not correct
when set bit<3>=1 to PWMCON register.
Signed-off-by: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
---
drivers/pwm/pwm-mediatek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index 5c11bc7..d08b5b3 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -91,7 +91,7 @@ static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
if (clkdiv > 7)
return -EINVAL;
- mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv);
+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | clkdiv);
Just for clarification, BIT(15) enables old PWM mode, which ignores
CLKSEL (BIT(3)). Therefore setting BIT(3) does not have any effect and
can be discarded.
Am I correct? I took mt7623n datasheet for reference.
Regards,
Matthias
mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution);
mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
