Hi, Here is an attempt at supporting the MIPI-CSI2 RX block from Cadence. This IP block is able to receive CSI data over up to 4 lanes, and split it to over 4 streams. Those streams are basically the interfaces to the video grabbers that will perform the capture. It is able to map streams to both CSI datatypes and virtual channels, dynamically. This is unclear at this point what the right way to support it would be, so the driver only uses a static mapping between the virtual channels and streams, and ignores the data types. This serie depends on the patch "v4l: async: add subnotifier registration for subdevices" from Niklas Söderlund. Let me know what you think! Maxime Maxime Ripard (2): dt-bindings: media: Add Cadence MIPI-CSI2RX Device Tree bindings v4l: cadence: Add Cadence MIPI-CSI2 RX driver .../devicetree/bindings/media/cdns-csi2rx.txt | 87 ++++ drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 2 + drivers/media/platform/cadence/Kconfig | 12 + drivers/media/platform/cadence/Makefile | 1 + drivers/media/platform/cadence/cdns-csi2rx.c | 440 +++++++++++++++++++++ 6 files changed, 543 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/cdns-csi2rx.txt create mode 100644 drivers/media/platform/cadence/Kconfig create mode 100644 drivers/media/platform/cadence/Makefile create mode 100644 drivers/media/platform/cadence/cdns-csi2rx.c -- 2.13.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
