Re: [PATCH 1/3] mmc: dw_mmc: use slot-gpio to handle cd pin

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Dear Kevin

On 01/15/2014 09:09 AM, zhangfei wrote:


On 01/15/2014 01:23 AM, Olof Johansson wrote:
On Tue, Jan 14, 2014 at 7:58 AM, Kevin Hilman <khilman@xxxxxxxxxx> wrote:
On Thu, Jan 9, 2014 at 6:35 AM, Zhangfei Gao
<zhangfei.gao@xxxxxxxxxx> wrote:
Suggested by Jaehoon: Use slot-gpio to handle cd-gpio
Add function dw_mci_of_get_cd_gpio to check "cd-gpios" from dts.
mmc_gpio_request_cd and mmc_gpio_get_cd are used to handle cd pin

Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>

The Samsung Arndale board started failing boot from MMC root tests
starting with next-20140113 and I bisected it down to this patch.
Reverting this patch on top of next-20140114 gets Arndale booting
again from MMC.  Is there some supporting DT data that's missing for
Arndale?

Rather, it looks like this patch changes behaviour and no longer uses
dw_mci_get_cd() to find out if there's a card attached -- it switches
to rely only on GPIO (see the last chunk in the patch). That seems
broken?

Oops,
Change using dw_mci_get_cd set flag DW_MMC_CARD_PRESENT.
And dw_mci_get_cd is called from mmc_rescan, a litter later than
dw_mci_probe.
Is that too late?

Should have found the issue, CDETECT is ignored since IS_ERR_VALUE does not workable to !mmc_gpio_get_cd(mmc), which used for adding debounce.
Sorry for that.

However, with this change the debounce seems not stable as before.
In the test of plug-in-out, sometimes sd detect will return timeout although present indicates as 1, while next time it can be detected again.
Still want to check more.


diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index a776f24f4311..f1683ba194ee 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1033,7 +1033,7 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
        int present;
        struct dw_mci_slot *slot = mmc_priv(mmc);
        struct dw_mci_board *brd = slot->host->pdata;
-       int gpio_cd = !mmc_gpio_get_cd(mmc);
+       int gpio_cd = mmc_gpio_get_cd(mmc);

        /* Use platform get_cd function, else try onboard card detect */
        if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
@@ -1041,7 +1041,7 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
        else if (brd->get_cd)
                present = !brd->get_cd(slot->id);
        else if (!IS_ERR_VALUE(gpio_cd))
-               present = !!gpio_cd;
+               present = !gpio_cd;
        else
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
                        == 0 ? 1 : 0;

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux