[PATCH v5 1/2] dt-bindings: input: Add Device tree bindings for Goodix GTx5 series touchscreen controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Signed-off-by: Wang Yafei <wangyafei@xxxxxxxxxx>
---
since v1:
 - Change device properties name
 - Modified irq property format
 - Modified linux,keycode format
 - Modified panel configuration property name
 - Remove time-delay properties
---
 .../bindings/input/touchscreen/goodix-gtx5.txt     | 61 ++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
new file mode 100644
index 0000000..9bb82c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix-gtx5.txt
@@ -0,0 +1,61 @@
+Device tree bindings for Goodix GTx5 series touchscreen controller
+
+Required properties:
+
+- compatible		: Should be "goodix,gt7589"
+				 or "goodix,gt8589"
+			         or "goodix,gt9589"
+- reg			: I2C address of the chip. Should be 0x5d or 0x14
+- interrupt-parent	: Interrupt controller to which the chip is connected
+- interrupts		: Interrupt to which the chip is connected
+- touchscreen-size-x	: horizontal resolution of touchscreen(in pixels)
+- touchscreen-size-y	: vertical resolution of touchscreen(in pixels)
+- touchscreen-max-id	: panel supported max touch number.
+- touchscreen-max-w	: panel max width value.
+
+Optional properties:
+- reset-gpios		  : reset gpio.
+- touchscreen-swapped-x-y : swap  x/y axis coordinates.
+- linux,keycodes	  : Specifies an array of numeric keycode values to
+			    be used for reporting button presses. The array can
+			    contain up to 8 entries.
+- goodix,normal-cfg-X	  : touch device normal config data, this config data is
+		            touchpanel manufacturer related. normal-cfg-X, X
+			    represent for a panel manufacturer, X is less than 10.
+- vtouch-supply		  : power supply for the touch device.
+
+Example:
+i2c@00000000 {
+	/* ... */
+
+	gt8589@14 {
+		compatible = "goodix,gt8589";
+		reg = <0x14>;
+		interrupt-parent = <&msm_gpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		vtouch-supply = <&pm8916_l15>;
+		reset-gpios = <&msm_gpio 12 0x0>;
+		touchscreen-max-id = <10>;
+		touchscreen-size-x = <400>;
+		touchscreen-size-y = <400>;
+		touchscreen-max-w = <400>;
+		linux,keycodes = <KEY_HOMEPAGE>, <KEY_MENU>, <KEY_BACK>;
+		goodix,normal-cfg-0 = [
+			02 00 00 09 09 01 07 02 00 00 00 00 01 00 3C 00 07 07
+			00 00 00 00 00 00 40 01 40 01 C8 00 96 00 F4 01 F4 01
+			F4 01 20 01 11 0A 0A 03 14 14 14 14 0A 0C 01 01 11 11
+			11 00 14 14 14 14 14 14 14 14 14 00 00 0F 00 00 00 00
+			00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+			00 00 00 00 00 00 00 00 00 00 11 09 10 00 31 32 33 34
+			00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 CA 64 00
+			00 00 00 00 00 00 09 00 13 00 00 00 00 00 00 00 00 00
+			50 B0 19 00 19 00 05 00 00 00 00 0A 05 00 00 00 00 00
+			01 00 FF 00 0B 06 0D 02 FF 04 05 03 07 01 08 0A 0E 11
+			0F 10 09 13 0C 16 17 14 18 12 19 15 1D 1E 1C 1F 1B 20
+			1A 2A 29 28 25 2B 27 21 FF 24 22 2C 26 23 FF 00 00 00
+			00 00 00 00 00 00 00 00 00 00 00 00 80 80 80 80 80 80
+			80 80 80 80 80 80 80 80 80 80 9F 22 01 AE];
+		};
+	};
+}
+
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux