On 6/27/17 4:32 PM, Guenter Roeck wrote:
On Tue, Jun 27, 2017 at 04:17:33PM -0500, Christopher Bostic wrote:
Describe device tree optional properties:
* aspeed,arm-reet - ARM CPU reset on signal
* aspeed,soc-reset - SOC reset on signal
* aspeed,sys-reset - System reset on signal
Disabling system reset may be required in situations where
one of the other watchdog engines in the system is responsible
for this.
* aspeed,interrupt - Interrupt CPU on signal
* aspeed,external-signal - Generate external signal (WDT1 and WDT2 only)
* aspeed,alt-boot - Boot from alternate block on signal
Signed-off-by: Christopher Bostic <cbostic@xxxxxxxxxxxxxxxxxx>
---
v2 - Add 'aspeed,' prefix to all optional properties
- Add arm-reset, soc-reset, interrupt, alt-boot properties
---
.../devicetree/bindings/watchdog/aspeed-wdt.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index c5e74d7..555b8b4 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -8,9 +8,34 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region
+Optional properties:
+ Signal behavior - Whenever a timeout occurs, the watchdog can be programmed
+ to generate 6 types of signals:
+
+ - aspeed,arm-reset: If property is present then reset ARM CPU only.
+
+ - aspeed,soc-reset: If property is present then reset SOC.
+
+ - aspeed,sys-reset: If property is present then reset the entire chip.
+ In cases where one of the other watchdog engines
+ in the system is responsible for system reset it
+ may be required to not specify this property.
+
+ - aspeed,interrupt: If property is present then interrupt CPU.
+
+ - aspeed,external-signal: If property is present then signal is sent to
+ external reset counter (only WDT1 and WDT2).
+ - aspeed,alt-boot: If property is present then boot from alternate block.
+
Example:
wdt1: watchdog@1e785000 {
compatible = "aspeed,ast2400-wdt";
reg = <0x1e785000 0x1c>;
+ aspeed,arm-reset;
+ aspeed,soc-reset;
+ aspeed,sys-reset;
+ aspeed,interrupt;
+ aspeed,external-signal;
+ aspeed,alt-boot;
Is that a bit mask or a value ? I would have thought that,
for example, a complete system reset would include the SoC reset,
and a SoC reset would include the ARM reset. Generating an
interrupt while at the same time resetting the system (or
part of it) doesn't seem to make much sense either.
No these aren't bitmasks. The example was intended to indicate what
could be used.
In practice only a subset of each of these properties would make any
sense. How
would you suggest the example be formatted to convey that? Multiple examples
I suppose.
Thanks,
Chris
Guenter
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html