On 26/06/2017 at 11:07, Uwe Kleine-König wrote:
> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
>
> Several drivers have the same device tree parsing code. Create
> a common helper function for it.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> [ukl: implement default <0 0> for rts-delay, unset unspecified flags]
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
> ---
> drivers/tty/serial/Kconfig | 4 ++++
> drivers/tty/serial/Makefile | 2 ++
> drivers/tty/serial/of.c | 47 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/serial_core.h | 13 +++++++++++++
> 4 files changed, 66 insertions(+)
> create mode 100644 drivers/tty/serial/of.c
>
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 5c8850f7a2a0..8baef5b95bed 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -14,6 +14,10 @@ config SERIAL_EARLYCON
> the console before standard serial driver is probed. The console is
> enabled when early_param is processed.
>
> +config OF_SERIAL
> + depends on SERIAL_CORE
> + def_bool y
> +
> source "drivers/tty/serial/8250/Kconfig"
>
> comment "Non-8250 serial port support"
> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
> index 53c03e005132..0fee8f4e36cb 100644
> --- a/drivers/tty/serial/Makefile
> +++ b/drivers/tty/serial/Makefile
> @@ -7,6 +7,8 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o
> obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
> obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
>
> +obj-$(CONFIG_OF_SERIAL) += of.o
> +
> # These Sparc drivers have to appear before others such as 8250
> # which share ttySx minor node space. Otherwise console device
> # names change and other unplesantries.
> diff --git a/drivers/tty/serial/of.c b/drivers/tty/serial/of.c
> new file mode 100644
> index 000000000000..b24e4357661b
> --- /dev/null
> +++ b/drivers/tty/serial/of.c
> @@ -0,0 +1,47 @@
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include <linux/of.h>
> +#include <linux/serial_core.h>
> +
> +/**
> + * of_get_rs485_mode() - Implement parsing rs485 properties
> + * @np: uart node
> + * @rs485conf: output parameter
> + *
> + * This function implements the device tree binding described in
> + * Documentation/devicetree/bindings/serial/rs485.txt.
> + *
> + * Return: 0 on success, 1 if the node doesn't contain rs485 stuff.
> + */
> +int of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf)
> +{
> + u32 rs485_delay[2];
> + int ret;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !np)
> + return 1;
> +
> + ret = of_property_read_u32_array(np, "rs485-rts-delay" rs485_delay, 2);
> + if (!ret) {
> + rs485conf->delay_rts_before_send = rs485_delay[0];
> + rs485conf->delay_rts_after_send = rs485_delay[1];
> + } else {
> + rs485conf->delay_rts_before_send = 0;
> + rs485conf->delay_rts_after_send = 0;
> + }
> +
> + /*
> + * clear full-duplex and enabled flags to get to a defined state with
> + * the two following properties.
> + */
> + rs485conf->flags &= ~(SER_RS485_RX_DURING_TX | SER_RS485_ENABLED);
> +
> + if (of_property_read_bool(np, "rs485-rx-during-tx"))
> + rs485conf->flags |= SER_RS485_RX_DURING_TX;
> +
> + if (of_property_read_bool(np, "linux,rs485-enabled-at-boot-time"))
> + rs485conf->flags |= SER_RS485_ENABLED;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_get_rs485_mode);
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 64d892f1e5cd..5ba00b1be093 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -500,4 +500,17 @@ static inline int uart_handle_break(struct uart_port *port)
> (cflag) & CRTSCTS || \
> !((cflag) & CLOCAL))
>
> +/*
> + * Common device tree parsing helpers
> + */
> +#ifdef CONFIG_OF_SERIAL
> +int of_get_rs485_mode(struct device_node *np, struct serial_rs485 *rs485conf);
> +#else
> +static inline int of_get_rs485_mode(struct device_node *np,
> + struct serial_rs485 *rs485conf)
> +{
> + return 1;
> +}
> +#endif
> +
> #endif /* LINUX_SERIAL_CORE_H */
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
