Re: [PATCH 6/6] Documentation/devicetree: Add FSI-attached I2C master dt bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Eddie,

> +Required properties:
> + - compatible = "ibm,i2cm-fsi";
> + - reg = < address size >;		: The FSI CFAM address and address space
> +					  size.
> + - #address-cells = <1>;		: Number of address cells in child nodes
> + - #size-cells = <0>;			: Number of size cells in child nodes.
> + - child nodes				: Nodes to describe ports off the I2C
> +					  master.
> +
> +Child node required properties:
> + - reg = < port number >		: The port number on the I2C master.
> +
> +Examples:
> +
> +    i2cm@1800 {
> +        compatible = "ibm,i2cm-fsi";
> +        reg = < 0x1800 0x400 >;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        port@0 {
> +            reg = <0>;
> +        };
> +
> +        port@1 {
> +            reg = <1>;
> +        };
> +    };

Those child nodes represent the downstream i2c buses, and so also
contain the i2c slave devices, right? If so, you may want to document
that, and/or add a simple device to that example (say, an EEPROM).

Cheers,


Jeremy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux