[PATCH v4 0/2] Lattice MachXO2 Slave SPI FPGA Manager support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi all,

this series adds support for the Lattice MachXO2 FPGA chip, programmed
over Slave SPI.

Tested on my raspberry pi3 + bugblat's pif2 fpga hat.

Changes from v1:
* fixed all the warnings pointed out by 'checkpatch --strict' and
  Alan Tull

Changes from v2:
* convert to BIT() macro and spi_message_init() / trans.delay_usecs

Changes in v3;
* loop unroll machxo2_write() and collate writes in a single spi_sync()

Paolo Pisati (2):
  dt: bindings: fpga: add lattice machxo2 slave spi binding description
  fpga: lattice machxo2: Add Lattice MachXO2 support

 .../bindings/fpga/lattice-machxo2-spi.txt          |  29 ++
 drivers/fpga/Kconfig                               |   7 +
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/machxo2-spi.c                         | 298 +++++++++++++++++++++
 4 files changed, 335 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt
 create mode 100644 drivers/fpga/machxo2-spi.c

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux