On Mon, Jun 26, 2017 at 10:11 AM, Eugeniy Paltsev
<Eugeniy.Paltsev@xxxxxxxxxxxx> wrote:
> From: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
>
> This initial port adds support of ARC HS Development Kit board with some
> basic features such serial port, USB, SD/MMC and Ethernet.
>
> Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and
> heavily use IO Coherency for speeding-up DMA-aware peripherals.
>
> Note as opposed to other ARC boards we link Linux kernel to
> 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM
> situated at our more usual link base 0x8000_0000. We still can use
> memory region starting at 0x8000_0000 as we reallocate DCCM in our
> platform code.
>
> Note that PAE remapping for DMA clients does not work due to an RTL bug,
> so CREG_PAE register must be programmed to all zeroes, otherwise it will
> cause problems with DMA to/from peripherals even if PAE40 is not used.
>
> Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/arc/hsdk.txt | 7 ++
> arch/arc/Kconfig | 1 +
> arch/arc/Makefile | 1 +
> arch/arc/boot/dts/hsdk.dts | 150 +++++++++++++++++++++++++
> arch/arc/configs/hsdk_defconfig | 75 +++++++++++++
> arch/arc/kernel/devtree.c | 5 +-
> arch/arc/plat-hsdk/Kconfig | 12 ++
> arch/arc/plat-hsdk/Makefile | 9 ++
> arch/arc/plat-hsdk/platform.c | 79 +++++++++++++
> 9 files changed, 337 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arc/hsdk.txt
> create mode 100644 arch/arc/boot/dts/hsdk.dts
> create mode 100644 arch/arc/configs/hsdk_defconfig
> create mode 100644 arch/arc/plat-hsdk/Kconfig
> create mode 100644 arch/arc/plat-hsdk/Makefile
> create mode 100644 arch/arc/plat-hsdk/platform.c
>
> diff --git a/Documentation/devicetree/bindings/arc/hsdk.txt b/Documentation/devicetree/bindings/arc/hsdk.txt
> new file mode 100644
> index 0000000..be50654
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arc/hsdk.txt
> @@ -0,0 +1,7 @@
> +Synopsys DesignWare ARC HS Development Kit Device Tree Bindings
> +---------------------------------------------------------------------------
> +
> +ARC HSDK Board with quad-core ARC HS38x4 in silicon.
> +
> +Required root node properties:
> + - compatible = "snps,hsdk";
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index 75e5276..825a112 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -101,6 +101,7 @@ source "arch/arc/plat-tb10x/Kconfig"
> source "arch/arc/plat-axs10x/Kconfig"
> #New platform adds here
> source "arch/arc/plat-eznps/Kconfig"
> +source "arch/arc/plat-hsdk/Kconfig"
>
> endmenu
>
> diff --git a/arch/arc/Makefile b/arch/arc/Makefile
> index 44ef35d..55ca925 100644
> --- a/arch/arc/Makefile
> +++ b/arch/arc/Makefile
> @@ -111,6 +111,7 @@ core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/
> core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
> core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
> core-$(CONFIG_ARC_PLAT_EZNPS) += arch/arc/plat-eznps/
> +core-$(CONFIG_ARC_PLAT_HSDK) += arch/arc/plat-hsdk/
>
> ifdef CONFIG_ARC_PLAT_EZNPS
> KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> new file mode 100644
> index 0000000..6a4e471
> --- /dev/null
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -0,0 +1,150 @@
> +/*
> + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/*
> + * Device Tree for ARC HS Development Kit
> + */
> +/dts-v1/;
> +
> +/include/ "skeleton_hs_idu.dtsi"
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +/ {
> + model = "snps,hsdk";
> + compatible = "snps,hsdk";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + chosen {
> + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
Use stdout-path for the console. Really, the bootargs should be blank
and populated by the bootloader especially debug options.
> + };
> +
> + cpu {
'cpu' is for cpu nodes, so need something different.
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
There are no reg properties, so these aren't needed. This doesn't look
like a simple-bus either.
Probably these child nodes should just be moved up to root level.
> + interrupt-parent = <&core_intc>;
> +
> + core_clk: core_clk {
core-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <1000000000>;
> + };
> +
> + core_intc: archs-intc@cpu {
cpu is not a valid unit-address. How are these interrupt controllers addressed?
> + compatible = "snps,archs-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + idu_intc: idu-interrupt-controller {
> + compatible = "snps,archs-idu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + arcpct0: pct {
> + compatible = "snps,archs-pct";
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&idu_intc>;
> +
> + ranges = <0x00000000 0xf0000000 0x10000000>;
> +
> + uart: dw-apb-uart@5000 {
serial@...
> + compatible = "snps,dw-apb-uart";
> + reg = <0x5000 0x100>;
> + clock-frequency = <33330000>;
> + interrupts = <6>;
> + baud = <115200>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> +
> + gmacclk: gmacclk {
> + compatible = "fixed-clock";
> + clock-frequency = <400000000>;
> + #clock-cells = <0>;
> + };
> +
> + mmcclk_ciu: mmcclk_ciu {
Don't use underscores in node names.
> + compatible = "fixed-clock";
> + clock-frequency = <100000000>;
> + #clock-cells = <0>;
> + };
> +
> + mmcclk_biu: mmcclk_biu {
> + compatible = "fixed-clock";
> + clock-frequency = <400000000>;
> + #clock-cells = <0>;
> + };
> +
> + ethernet@8000 {
> + #interrupt-cells = <1>;
> + compatible = "snps,dwmac";
> + reg = <0x8000 0x2000>;
> + interrupts = <10>;
> + interrupt-names = "macirq";
> + phy-mode = "rgmii";
> + snps,pbl = <32>;
> + clocks = <&gmacclk>;
> + clock-names = "stmmaceth";
> + phy-handle = <&phy0>;
> +
> + mdio0 {
mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + phy0: ethernet-phy@0 {
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> + };
> + };
> +
> + ohci@60000 {
> + compatible = "generic-ohci";
This should have an SoC specific compatible.
> + reg = <0x60000 0x100>;
> + interrupts = <15>;
> + };
> +
> + ehci@40000 {
> + compatible = "generic-ehci";
This should have an SoC specific compatible.
> + reg = <0x40000 0x100>;
> + interrupts = <15>;
> + };
> +
> + mmc@a000 {
> + compatible = "altr,socfpga-dw-mshc";
> + reg = <0xa000 0x400>;
> + num-slots = <1>;
> + fifo-depth = <16>;
> + card-detect-delay = <200>;
> + clocks = <&mmcclk_biu>, <&mmcclk_ciu>;
> + clock-names = "biu", "ciu";
> + interrupts = <12>;
> + bus-width = <4>;
> + };
> + };
> +
> + memory {
memory@80000000
> + #address-cells = <1>;
> + #size-cells = <1>;
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>; /* 1 GiB */
> + };
> +};
> diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
> new file mode 100644
> index 0000000..53bc9f3
> --- /dev/null
> +++ b/arch/arc/configs/hsdk_defconfig
> @@ -0,0 +1,75 @@
> +CONFIG_DEFAULT_HOSTNAME="ARCLinux"
> +CONFIG_SYSVIPC=y
> +# CONFIG_CROSS_MEMORY_ATTACH is not set
> +CONFIG_NO_HZ_IDLE=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_NAMESPACES=y
> +# CONFIG_UTS_NS is not set
> +# CONFIG_PID_NS is not set
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
> +CONFIG_EMBEDDED=y
> +CONFIG_PERF_EVENTS=y
> +# CONFIG_VM_EVENT_COUNTERS is not set
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_SLAB=y
> +CONFIG_ARC_PLAT_HSDK=y
> +CONFIG_ISA_ARCV2=y
> +CONFIG_SMP=y
> +CONFIG_LINUX_LINK_BASE=0x90000000
> +CONFIG_KERNEL_RAM_BASE_ADDRESS=0x80000000
> +CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
> +CONFIG_PREEMPT=y
> +# CONFIG_COMPACTION is not set
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_DEVTMPFS=y
> +# CONFIG_STANDALONE is not set
> +# CONFIG_PREVENT_FIRMWARE_BUILD is not set
> +# CONFIG_FIRMWARE_IN_KERNEL is not set
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_NETDEVICES=y
> +CONFIG_STMMAC_ETH=y
> +CONFIG_MICREL_PHY=y
> +# CONFIG_INPUT_KEYBOARD is not set
> +# CONFIG_INPUT_MOUSE is not set
> +# CONFIG_SERIO is not set
> +# CONFIG_LEGACY_PTYS is not set
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_DW=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +# CONFIG_HW_RANDOM is not set
> +# CONFIG_HWMON is not set
> +CONFIG_FB=y
> +CONFIG_FB_UDL=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_HCD_PLATFORM=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_HCD_PLATFORM=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_DW=y
> +# CONFIG_IOMMU_SUPPORT is not set
> +CONFIG_EXT3_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
> +# CONFIG_ENABLE_WARN_DEPRECATED is not set
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_STRIP_ASM_SYMS=y
> +CONFIG_LOCKUP_DETECTOR=y
> +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
> +# CONFIG_SCHED_DEBUG is not set
> +# CONFIG_DEBUG_PREEMPT is not set
> +# CONFIG_FTRACE is not set
> diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
> index 3b67f53..521ef35 100644
> --- a/arch/arc/kernel/devtree.c
> +++ b/arch/arc/kernel/devtree.c
> @@ -29,8 +29,9 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
> {
> if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x"))
> arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */
> - else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
> - arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */
> + else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") ||
> + of_flat_dt_is_compatible(dt_root, "snps,hsdk"))
> + arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */
You should get this info from DT. You don't need to address that now though.
> else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
> arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */
> else
> diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
> new file mode 100644
> index 0000000..29dffed
> --- /dev/null
> +++ b/arch/arc/plat-hsdk/Kconfig
> @@ -0,0 +1,12 @@
> +#
> +# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
> +#
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License version 2 as
> +# published by the Free Software Foundation.
> +#
> +
> +menuconfig ARC_PLAT_HSDK
> + bool "ARC HS Development Kit board"
Per board config options don't scale and shouldn't be necessary with DT...
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
