From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
We just got a common helper for parsing the rs485 specific
device tree properties. Use it and drop the open coded parser.
Note that there is a small difference between the removed and the now
used implementation: The former cleared flags to 0 if rs485-rts-delay
was given, the common helper clears SER_RS485_RX_DURING_TX and
SER_RS485_ENABLED only but always which makes more sense.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
[ukleinek: point out semantic change in commit log]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/atmel_serial.c | 25 +------------------------
1 file changed, 1 insertion(+), 24 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 937d67f22fba..245d9c227ad5 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1684,29 +1684,6 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
}
}
-static void atmel_init_rs485(struct uart_port *port,
- struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
-
- struct serial_rs485 *rs485conf = &port->rs485;
- u32 rs485_delay[2];
-
- /* rs485 properties */
- if (of_property_read_u32_array(np, "rs485-rts-delay",
- rs485_delay, 2) == 0) {
- rs485conf->delay_rts_before_send = rs485_delay[0];
- rs485conf->delay_rts_after_send = rs485_delay[1];
- rs485conf->flags = 0;
- }
-
- if (of_get_property(np, "rs485-rx-during-tx", NULL))
- rs485conf->flags |= SER_RS485_RX_DURING_TX;
-
- if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
- rs485conf->flags |= SER_RS485_ENABLED;
-}
-
static void atmel_set_ops(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
@@ -2390,7 +2367,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
atmel_init_property(atmel_port, pdev);
atmel_set_ops(port);
- atmel_init_rs485(port, pdev);
+ of_get_rs485_mode(pdev->dev.of_node, &port->rs485);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
