Hi, > -----Original Message----- > From: Rob Herring > Sent: Saturday, June 24, 2017 3:21 AM > > On Thu, Jun 15, 2017 at 08:34:22PM +0900, Yoshihiro Shimoda wrote: > > USB 2.0 PHY of R-Car Gen3 can change the clock source from an oscillator > > to an external clock via a register. So, this patch adds support > > the clock source selector as a generic PHY driver. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > > --- > > This patch is based on the latest linux-phy.git / next branch > > (commit id = 787f24543c4a599e5d9d311a3fce839ce87bbff0) > > > > I'm not sure this driver ss OK or not as a generic phy driver. > > So, I send this patch as RFC. > > > > .../bindings/phy/rcar-gen3-phy-usb2-clksel.txt | 58 +++++++++ > > drivers/phy/renesas/Kconfig | 8 ++ > > drivers/phy/renesas/Makefile | 1 + > > drivers/phy/renesas/phy-rcar-gen3-usb2-clksel.c | 129 +++++++++++++++++++++ > > 4 files changed, 196 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2-clksel.txt > > create mode 100644 drivers/phy/renesas/phy-rcar-gen3-usb2-clksel.c > > > > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2-clksel.txt > b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2-clksel.txt > > new file mode 100644 > > index 0000000..71b2f1b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2-clksel.txt > > @@ -0,0 +1,58 @@ > > +* Renesas R-Car generation 3 USB 2.0 clock selector PHY > > + > > +This file provides information on what the device node for the R-Car generation > > +3 USB 2.0 clock selector PHY contains. > > Is this a phy or just a clock selector and nothing else? It sounds more > like the latter and you should use the clock binding. Whether this is a > phy driver in the kernel is a separate question really. Thank you for the comment. This is just a clock selector. So, I will try to make a clock driver for this. Best regards, Yoshihiro Shimoda > > + > > +If you connect an external clock to the USB_EXTAL pin, you can use the > > +"renesas,usb_extal_only" property for it. > > +If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module > > +is not needed because this is default setting. > > + > > +Case 1: An external clock connects to R-Car SoC > > + +----------+ +--- R-Car ---------------------+ > > + |External |---|USB_EXTAL ---> all usb channels| > > + |clock | |USB_XTAL | > > + +----------+ +-------------------------------+ > > +In this case, we need this driver with "usb-extal-only" property. > > + > > +Case 2: An oscillator connects to R-Car SoC > > + +----------+ +--- R-Car ---------------------+ > > + |Oscillator|---|USB_EXTAL -+-> all usb channels| > > + | |---|USB_XTAL --+ | > > + +----------+ +-------------------------------+ > > +In this case, we don't need this selector. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
